Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 27x 27-in Curved Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
2
0
0
1
0
8
0
2
0
0
0
0
0
0
Advertisement
Related Manuals for HP 27x
Summary of Contents for HP 27x
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Tool Description Tool Size (if applicable) Description #1 Screw driver of "+" type Description #2 Hexagonal nut screw driver for D-SUB connector Description #3 The model using the curved surface screen; There must be put soft mat above of the work station and don't push hard on the machine to avoid cause screen to crack.
- Page 3 12. Mechanical Instructions Step Figure Description The model using the curved surface screen; There must be put soft mat above of the work station Remove and don't push hard on the STAND. machine to avoid cause screen to crack. Remove the screws to remove the stand-base...
- Page 4 Remove the pin Remove the pin and the and tape tape Remove Remove the the pins pins and the and the screws screws...
- Page 5 Remove Remove the pin the Pin and the screws and the screws Remove Remove the the screws screws...
- Page 6 Remove Remove the pin the pin Remove the Remove screws the screws The panel The panel Remove the Remove screws to the board remove the borad.
- Page 7 Remove the screws to remove the key The rear board/LED cover board from the rear cover The key The key board/LED board/LED board board The middle The middle frame frame The rear The rear cover cover...