Table of Contents
Advertisement
3-1. Setup Menu
The Setup menu is used to select settings of camera operation, select items to be displayed on the view-
finder screen, and select the way the items are displayed.
It is also used for adjustment. The menu appears on the viewfinder screen.
By changing an internal switch on the IF-538 board, the same signal as output to the viewfinder is
enabled to be output at the MONITOR connector.
•
Configuration of the Setup Menu
The setup menu consists of the following menus
• Operation menu
• Paint menu
• Maintenance menu
• Reference menu
• Triming menu
• System config menu
Operation and Paint menus are normally accessible. To display the other menus, switch setting of the
AT-95 board is required. For details, refer to Section 1-5. "Function of Internal Switches—AT-95 board"
•
Equipment required
CCD Unit
Camera Control Unit
7-inch Electronic Viewfinder BVF-77/77CE (or B/W monitor)
•
Switches and Control knob
BVP-500
BVP-500P
http://getMANUAL.com
Section 3
Setup Menu
OHB-400/500 series
CCU-700/700P/700A/700AP.
3-1
Advertisement
Table of Contents
