Table of Contents
Advertisement
Available languages
Available languages
Using the ID MODE button
You can operate a specific display without affecting
other displays installed at the same time.
1
Press ON button.
Display's "Index Number" appears in black
characters on the lower left menu on the screen.
(Every display is allocated an individual preset
"Index Number" from 1 to 255.)
Index Number
Index Number :
117
2
Input the "Index Number" of the display you
want to operate using the 0 - 9 buttons on
the remote control.
The input number appears right next to the "Index
Number" of each display.
3
Press SET button.
The characters on the selected display change to
green while the others change to red.
You can operate the specified display indicated
with green characters only.
Only the operation of POWER ON switch and
STANDBY/ID MODE-OFF button is effective to
other displays, as well.
16
GB
Input Number
Index Number :
117 117
4
When all of the setting changes have been
completed, press OFF button.
The display returns to the normal screen.
To correct the Index Number
Press the C button to clear the current input "Index
Number". Return to Step 2, and input a new "Index
Number".
Tip
To change the "Index Number" of the display, see "Remote
Index" in "Control Setting" on See page 27.
Using the ECO Mode function
You can reduce the power consumption of the display.
ECO
ECO Mode:
Low
ECO Mode:
High
ECO Mode:
Picture Off
To cancel the ECO Mode
Press ECO button repeatedly until "ECO Mode : Off"
appears.
Tips
• If you turn off the display when the "ECO Mode" is
activated, the mode stays on next time you turn on the
display except "Picture Off".
• You can set the "ECO Mode" using the "Setup" settings.
Select "ECO Mode" in the "Setup" settings, then set it to
"Off", "Low", "High", or "Picture Off".
ECO Mode:
Off
- Quick Links:
- English
Hide quick links:
Advertisement
Chapters
Table of Contents
