Table of Contents
Advertisement
How to use washer
■
Options
Medic Rinse
For best results or for cleaner rinsing.
This allows the final rinse to be heated to 40
degrees.
1. Press the Power button.
2. Select a cycle.
3. Touch the Medic Rinse button and set time
required.
4. Press the Start/Pause button.
Wash
• Time Save : This option can be used to
reduce the time of a wash program.
• Intensive : If the laundry is normal and
heavily soiled, "Intensive" option is effective.
Rinse
• R + +Hold : Add rinse once then after rinsing
process, the course is paused until start
button is pressed again.
• N+Hold : The course is paused until start
button is pressed again when rinse is
finished.
• Rinse ++ : Add rinse twice.
• Rinse + : Add rinse once.
Temp.
• By touching the Temp. button the water
temperature can be selected.
- Cold
- 30°C, 40°C, 60°C, 95°C
• Water temperature can be selected
according to the program.
Spin
• Spin Speed level can be selected by
touching 'Spin' button repeatedly.
Rinse+Spin
This can be helpful in preventing fresh stains
from setting in fabrics.
This is a separate cycle.
1. Press the Power button.
2. Select a cycle.
3. Touch the Rinse+Spin button.
4. Press the Start/Pause.
■
Other functions
Spin only
1. Press the Power button.
2. Touch the Spin button to select RPM.
3. Press the Start/Pause.
NOTE
When you select "No Spin", it will still
rotate for a short time with low speed to
drain quickly.
Refresh Cycle
1. Press the Power button.
2. Select the Refresh program.
3. Touch the Steam Wash button repeatedly
until the correct item is displayed.
4. Press the Start/Pause button.
NOTE
For better performance load 3 item or
less.
When Refresh cycle finishes, laundry will
continue to be tumbled slowly for up to
30 minutes to prevent wrinkling. You can
open the door in this time by pressing
any button.
23
Advertisement
Table of Contents
