hit counter script
Canon PIXMA MP610 Series Quick Start Manual

Canon PIXMA MP610 Series Quick Start Manual

Photo all in one printer
Hide thumbs Also See for PIXMA MP610 Series:
Table of Contents

Advertisement

Photo All-In-One

Quick Start Guide

Advertisement

Table of Contents
loading

Summary of Contents for Canon PIXMA MP610 Series

  • Page 1: Quick Start Guide

    Photo All-In-One Quick Start Guide...
  • Page 2: Getting Help From Canon

    Telephone Device for the Deaf (TDD) support is available at (1-866-251-3752). 4. Extended Service and Support — Canon CarePAK Extended Service Plan is a cost-attractive and easy-to-use extended service program that provides up to three full years of service and support coverage at a very attractive price.
  • Page 3 Photo All-In-One Quick Start Guide...
  • Page 4 Canon PIXMA MP610 series Photo All-In-One Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc.
  • Page 5: Table Of Contents

    Table of Contents Before Using the Machine ...2 How to Navigate Menus on the LCD ...2 Turning the Machine On and Off ...5 Handling the Original Document...6 Loading Printing Paper ...8 Hints for Handling the Paper Sources ...11 Changing the Paper Source ...14 Loading Paper ...15 Loading Envelopes ...19 Loading Small-Sized Paper ...22...
  • Page 6: Before Using The Machine

    Before Using the Machine How to Navigate Menus on the LCD You can display the menu screen or setting screen and use various functions on the LCD. This section describes about the basic operation of the menu screen and buttons on the Operation Panel.
  • Page 7: Function Buttons

    You can select the following modes on the HOME screen: Copy: You can copy in various layouts. See “Copying” on page 24. Scan: You can save the scanned data to a connected computer using the Operation Panel. See “Scanning Images” on page 38. Photo index sheet: You can easily print the photos from a memory card using the Photo Index Sheet.
  • Page 8 Display the Print Instruction Using the Navigation Menu When you do not know how to use the print function for the frequent use or how to refill paper, you can easily get the explanation from the navigation menu. Press the NAVI button. The NAVI screen is displayed.
  • Page 9: Turning The Machine On And Off

    Turning the Machine On and Off Turn on the machine before printing. Turning on the Machine Before turning on the machine, confirm the following. The Print Head and ink tanks are installed into place. If you are using the machine connected to a computer, confirm also the following. The machine is connected to your computer (or a compatible device).
  • Page 10: Handling The Original Document

    Handling the Original Document This section describes how to load the original document on the Platen Glass. Original Document Requirements The original documents you load on the Platen Glass for copying or scanning must meet these requirements: Document Paper documents type Photographs Books...
  • Page 11 Note The machine cannot scan the shaded area in the figure below. (A) 0.04 inches / 1 mm (B) 0.04 inches / 1 mm Gently close the Document Cover. Before Using the Machine...
  • Page 12: Loading Printing Paper

    Rear Tray. Do not place any objects in front of the machine. Using Specialty Media Canon recommends that you use Canon genuine media to ensure optimal print quality. Photo Quality Media Glossy Photo Paper...
  • Page 13: Paper Handling

    1 sheet Stickers *1 Paper with a Model Number is Canon specialty media. Refer to the instruction manual supplied with the paper for detailed information on the printable side and notes on handling paper. For information on the paper sizes available for each Canon genuine paper, visit our website.
  • Page 14: Media Types You Cannot Use

    Folded, curled, or wrinkled paper Damp paper Paper that is too thin (weighing less than 17 lb / 64 gsm) Paper that is too thick (plain paper, except for Canon genuine paper, weighing more than 28 lb / 105 gsm) Picture postcards...
  • Page 15: Hints For Handling The Paper Sources

    Paper that is not rectangular Paper bound with staples or glue Paper with adhesives Paper decorated with glitter, etc. Hints for Handling the Paper Sources This machine offers two paper sources to load printing paper; the Rear Tray (A) and the Cassette (B).
  • Page 16 If You Print Regularly on Photo Paper as well as on Plain Paper If you use photo paper as much as plain paper, you can load photo paper in the Rear Tray and plain paper in the Cassette. This way, you can switch the paper source according to the type of paper just by pressing the Paper Feed Switch.
  • Page 17 If You Print Mainly on Plain Paper You can load plain paper of the same size in both paper sources, and set the printer driver to automatically switch the paper source when either paper source runs out of paper during printing.
  • Page 18: Changing The Paper Source

    Changing the Paper Source Each time you press the Paper Feed Switch, the paper source to be used switches between the Rear Tray and the Cassette. The paper feeds from the paper source whose lamp is lit. (A) Rear Tray lamp (B) Cassette lamp (C) Paper Feed Switch Important...
  • Page 19: Loading Paper

    – Non-standard sizes for the Cassette: 3.5 x 5 inches to 8.5 x 11.69 inches / 89.0 x 127.0 mm to 215.9 x 297.0 mm Paper weight: 17 to 28 lb / 64 to 105 gsm (plain paper, except for Canon genuine paper) Loading Paper in the Rear Tray Flatten the four corners of the paper before loading it.
  • Page 20 Prepare to load paper. (1) Open the Sheet Feeder Cover and pull out the Paper Support. Put your finger in the rounded indent of the Paper Support and pull it out until it stops. (2) Open the Paper Output Tray. Put your finger in the indent on the top of the Paper Output Tray and open it gently.
  • Page 21: Loading Paper In The Cassette

    Loading Paper in the Cassette Some types and sizes of paper are not loadable in the Cassette and require the use of the Rear Tray. If you intend to use only the Cassette, check for any usage restrictions in advance. See “Paper Handling”...
  • Page 22 Insert the Cassette into the machine. Push the Cassette all the way into the machine. Prepare the Paper Output Tray. (1) Open the Paper Output Tray. Put your finger in the rounded indent of the Paper Output Tray and open it gently. (2) Open the Output Tray Extension.
  • Page 23: Loading Envelopes

    Loading Envelopes Use either European DL or US Comm. Env. #10-sized envelope. Important You need to print from the computer to print on envelopes. Do not use the following envelopes: – Envelopes with double flaps (or sticker flaps) – Envelopes with an embossed or treated surface –...
  • Page 24 Load the envelopes. (1) Load the envelope against the Cover Guide (the right side of the Paper Support). Load with the address side facing UP and the rear flaps DOWN on the left. Up to 10 envelopes can be loaded at once. Important Make sure that the Cover Guide is set upright when you load envelopes in the Rear Tray.
  • Page 25: Loading Envelopes In The Cassette

    Loading Envelopes in the Cassette Prepare the envelopes. See “Prepare the envelopes” on page 19. Load the envelopes. (1) Align the envelope stack against the right side of the Cassette. Load with the address side facing DOWN. The flap of the envelope will appear facing UP on the left side.
  • Page 26: Loading Small-Sized Paper

    Loading Small-Sized Paper You can use 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, and Credit card-sized papers. Note Load Credit card-sized paper in the Rear Tray. Loading Small-Sized Paper in the Rear Tray (1) Load the small-sized paper against the Cover Guide (the right side of the Paper Support) with the print side facing UP.
  • Page 27 Loading Small-Sized Paper in the Cassette (1) Align the paper stack against the right side of the Cassette with the print side facing DOWN. (2) Slide the Paper Guides against the sides of the paper stack. (3) Press the Paper Feed Switch so that the Cassette lamp lights.
  • Page 28: Copying

    Copying Making Copies This section describes the basic procedure to make copies. For details, refer to “Copying” in the User’s Guide on-screen manual. Turn on the machine. See “Turning the Machine On and Off” on page 5. Make sure that Copy is selected on the HOME screen, then press the OK button. Load paper.
  • Page 29: Using Useful Copy Functions

    (3) Page size Select the page size of the loaded paper. (4) Media type Select the media type of the loaded paper. (5) Print quality Adjust print quality according to the original. (6) Paper source Select the paper source. Before printing, confirm that the location where you have loaded paper is selected as the paper source.
  • Page 30: Printing From A Memory Card

    Printing from a Memory Card Memory Cards Supported by This Machine The following memory cards are compatible with this machine. Memory cards that can be directly inserted into the Card Slot: Memory cards that can be inserted in the Card Slot using the adapter: Important If one of the following memory cards is inserted without an adapter, you may not be able to remove the card.
  • Page 31: Inserting The Memory Card

    Inserting the Memory Card Caution When a memory card is inserted into the Card Slot, the Access lamp is lit. When this Access lamp is flashing, the machine is accessing to the memory card. In this case, do not touch the area around the Card Slot.
  • Page 32: Removing The Memory Card

    Caution The memory card will stick out of the Card Slot, but do not force it into the slot any further. Doing so damages the machine and the memory card. Make sure that the memory card is correctly oriented before inserting it into the Card Slot. If you force the memory card into the Card Slot in the wrong orientation, you may damage the memory card and/or the machine.
  • Page 33: Setting Items

    (3) Repeat steps (1) and (2) to specify the number of copies for each photo. (4) Press the OK button. Start printing. (1) Confirm the print setting. To change the settings, select the item and press the OK button. (2) Confirm the total number of copies for the selected photos.
  • Page 34 Advanced Print Settings Screen When you press the left Function button in the print settings confirmation screen, the Auto image fix screen is displayed. When Auto image fix ON is selected, the scene or person’s face of a shot photo is recognized and the most suitable correction for each photo is made automatically.
  • Page 35 (1) Date Activate/deactivate to print the shooting date on a photo. (2) File no. Activate/deactivate to print the file no. on a photo. Note It is not possible to print both the shooting date and the file no. under the following conditions: Layout print is selected as a print function in the memory card mode, and/or Credit card is selected in Page size.
  • Page 36: Using Useful Printing Functions

    Layout print Prints photos you pasted in the specified layout. Sticker print Prints your favorite photo with a frame on Canon Photo Stickers. DPOF print Prints according to the Digital Print Order Format (DPOF) settings on your digital camera, if you have specified them.
  • Page 37: Printing By Using The Photo Index Sheet

    Printing by Using the Photo Index Sheet Turn on the machine, and load A4 or Letter-sized plain paper. See “Turning the Machine On and Off” on page 5 and “Loading Printing Paper” on page 8. Make sure that the proper paper source is selected. See “Changing the Paper Source”...
  • Page 38: Photo Printing From Printed Photo

    Photo Printing from Printed Photo You can scan printed photos, specify the number of copies with viewing them on the LCD, and print them. Turn on the machine. See “Turning the Machine On and Off” on page 5. Select Easy photo reprint on the HOME screen, then press the OK button. Lift the Document Cover and load the photos on the Platen Glass.
  • Page 39: Using Useful Printing Functions

    The specified number of copies of each photo will be printed. Using Useful Printing Functions Sticker print Prints your favorite photo on Canon Photo Stickers to create your own stickers. Print all photos Prints all scanned photos. Using Useful Display Functions Change display The display method of a photograph can be changed.
  • Page 40: Printing From Your Computer

    Create a document or open a file to print using an appropriate application software. Select Print on the application software’s File menu. Make sure that Canon XXX Printer (where “XXX” is your machine’s name) is selected in Select Printer, and click Preferences (or Properties).
  • Page 41: Printing With Macintosh

    Printing with Macintosh Turn on the machine and load the paper in the machine. See “Turning the Machine On and Off” on page 5 and “Loading Printing Paper” on page 8. Create a document or open a file to print using an appropriate application software. Select Page Setup on the application software’s File menu.
  • Page 42: Scanning Images

    Scanning Images You can scan images from the machine to a computer without printing them and save them in popular image types, such as JPEG, TIFF, bitmaps, or PDF. If you are scanning printed text, you can use the OCR (Optical Character Recognition) software to convert it to text data. Scanning Methods You can select from the various scanning methods.
  • Page 43 Select the document type, then press the OK button. Important Make sure that the document is loaded correctly according to the document type you have selected. For details, refer to “Scanning Methods” in the User’s Guide on-screen manual. Select the scan operation, then press the OK button. Press the Color or Black button.
  • Page 44: Printing Photographs Directly From A Pictbridge Compliant Device

    Printing Photographs Directly from a PictBridge Compliant Device You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phone using a USB cable recommended by the device’s manufacturer, and print recorded images directly without using a computer. Connectable Devices PictBridge is an industry standard enabling a range of digital photo solutions, including the direct printing of photos from a digital still camera, camcorder or mobile phone* without the need to use...
  • Page 45: Printing Photographs Directly From A Pictbridge Compliant Device

    Connect the PictBridge compliant device to the machine. Note Depending on the model or brand of your device, you may have to select a print mode compliant with PictBridge before connecting the device. You may also have to turn on the device or select Play mode manually after connecting the device to the machine.
  • Page 46: About Pictbridge Print Settings

    PictBridge compliant device. Note In the following description, names of setting items are given according to those used in Canon- brand PictBridge compliant devices. Setting item names may be different depending on the brand or model of your device.
  • Page 47 See “Setting on the Machine” on page 44. When you select On, photos are optimized for printing using the Photo opt. pro function. If you are using a Canon-brand PictBridge compliant device, the following additional options may be available, depending on the model.
  • Page 48 Setting on the Machine This section describes the PictBridge print settings on the machine. Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the machine. Displaying the PictBridge Settings Screen and Specifying the Settings (1) Turn on the machine.
  • Page 49 Setting Items Setting Item Page size Media type Print quality Bordered/Borderless Select bordered or borderless print. Photo opt. pro Vivid photo Face brightener Noise reduction Image optimizer (10) Red eye correc. (11) Brightness (12) Contrast (13) Color hue (14) Effects Set the items in this column to Default on the PictBridge compliant device when you want to make settings on the machine.
  • Page 50: Routine Maintenance

    Routine Maintenance Replacing an Ink Tank This section explains the way to confirm the ink status and the procedure to replace ink tanks. When ink runs out or other errors occur, an error message is displayed on the LCD to inform you of the error.
  • Page 51 An error message may be displayed on the LCD during printing. (B) Empty ink tank. With the Ink Lamps You can confirm the status of each ink tank by the ink lamps. Open the Scanning Unit (Printer Cover) of the machine to confirm how the ink lamps light or flash. Ink lamp is on The ink tank is correctly set and there is enough ink remaining to print.
  • Page 52: Replacing Ink Tanks

    Important Handling Ink To maintain optimal printing quality, we recommend the use of specified Canon brand ink tanks. Refilling ink is not recommended. Once you remove an ink tank, replace it immediately. Do not leave the machine with ink tanks removed.
  • Page 53 Remove the ink tank whose lamp is flashing fast. (1) Push the tab and remove the ink tank. Important Handle ink tanks carefully to avoid staining clothing or the surrounding area. Discard empty ink tanks according to the local laws and regulations regarding disposal of consumables.
  • Page 54 Install the ink tank. (1) Insert the front end of the ink tank into the Print Head. (G) Make sure the position of the tank matches the label. (2) Press on the mark on the ink tank until the ink tank snaps firmly into place. (3) Make sure that the ink lamp lights up red.
  • Page 55: Keeping The Best Printing Results

    Keeping the Best Printing Results To avoid drying of the Print Head and clogging of the nozzles, note the following. Note Ink may blur depending on the paper in the following cases; – Printed area is traced with a highlight pen or paint-stick –...
  • Page 56: When Printing Becomes Faint Or Colors Are Incorrect

    See “Print Head Deep Cleaning” on page 57. Note If Print Head Deep Cleaning does not resolve the problem, the Print Head may be damaged. Contact your Canon service representative. If the Ruled Lines Are Shifted See “Aligning the Print Head” on page 58.
  • Page 57: Printing The Nozzle Check Pattern

    Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. Note Make sure that the Inner Cover is closed. Make sure that the machine is turned on, then load a sheet of A4 or Letter-sized plain paper in the Rear Tray or Cassette.
  • Page 58: Examining The Nozzle Check Pattern

    Examining the Nozzle Check Pattern Examine the nozzle check pattern, and perform cleaning if necessary. Note If the ink level is low, the nozzle check pattern is not printed correctly. Replace the relevant ink tank. See “Replacing an Ink Tank” on page 46. Check the nozzle check pattern you printed.
  • Page 59 The confirmation screens for white streaks and missing lines are displayed alternately. Select the pattern that is closer to the nozzle check pattern that you printed. If There Are No Missing Lines and No White Streaks (1) Select All A and press the OK button. The LCD returns to the Maintenance screen.
  • Page 60: Print Head Cleaning

    Print Head Cleaning Clean the Print Head if lines are missing or if white streaks appear in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary.
  • Page 61: Print Head Deep Cleaning

    (2) If the problem is not resolved, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. (3) If this does not solve the problem, the Print Head may be damaged. Contact your Canon service representative.
  • Page 62: Aligning The Print Head

    Always load paper in the Rear Tray. Make sure that the machine is turned on, and then load two sheets of supplied paper or A4/Letter-sized Canon Matte Photo Paper MP-101 with the printing side (whiter side) facing up. Open the Paper Output Tray, and then open the Output Tray Extension.
  • Page 63: Manual Print Head Alignment

    Manual Print Head Alignment If the results of Automatic Print Head Alignment are not satisfactory, follow the procedure below to perform Manual Print Head Alignment. For details on performing Automatic Print Head Alignment, see “Automatic Print Head Alignment” on page 58. Make sure that the machine is turned on, and then load four sheets of A4 or Letter- sized plain paper in the Rear Tray or Cassette.
  • Page 64 Look at the first printout, and then adjust the print head position. (1) Check the printed patterns and use the [ or ] button to input the number of the pattern in column A that has the least noticeable vertical streaks.
  • Page 65 Look at the second printout, and then adjust the print head position. (1) Check the printed patterns and use the [ or ] button to input the number of the pattern in column H that has the least noticeable vertical streaks.
  • Page 66 Note If it is difficult to pick the most even pattern, pick the setting that produces the least noticeable horizontal white streaks. (C) Less noticeable horizontal white streaks (D) More noticeable horizontal white streaks (3) Confirm the displayed message and press the OK button. The fourth pattern is printed.
  • Page 67: Cleaning Your Machine

    Cleaning Your Machine This section describes the cleaning procedure that is needed to maintain your machine. Caution Do not use tissue paper, paper towels, or similar materials for cleaning. Paper tissue powders or fine threads may remain inside the machine and cause problems such as a blocked Print Head and poor printing results.
  • Page 68 Cleaning the Paper Feed Roller (Roller Cleaning) Clean the paper feed roller if paper is not fed properly. Cleaning the paper feed roller will wear the roller, so perform this only when necessary. Note Make sure that the Inner Cover is closed. Make sure that the machine is turned on, and then remove any paper from the Rear Tray and Cassette.
  • Page 69: Cleaning The Inside Of The Machine (Bottom Plate Cleaning)

    Tray with a moistened cotton swab or the like. Rotate the roller (A) manually as you clean it. Do not touch the roller with your fingers; rotate it with the cotton swab. If this does not solve the problem, contact your Canon service representative. Cleaning the Inside of the Machine (Bottom Plate Cleaning) This section describes how to clean the inside of the machine.
  • Page 70 Load this and only this sheet of paper in the Rear Tray with the open side to the front. Perform bottom plate cleaning. Important Even if the Cassette is selected as the paper source, paper will be fed from the Rear Tray. (1) Press the HOME button.
  • Page 71: Cleaning The Protrusions Inside The Machine

    Cleaning the Protrusions Inside the Machine If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab or the like. Caution Be sure to turn off the power and disconnect the power cord before cleaning the machine. Routine Maintenance...
  • Page 72: Troubleshooting

    Troubleshooting This section describes troubleshooting tips for problems you may encounter when using the machine. Note This section mainly describes the methods of machine operation for troubleshooting. To handle problems using your computer, refer to “Troubleshooting” in the User’s Guide on-screen manual. For details on how to view the on-screen manuals, see “Reading the On-screen Manuals”...
  • Page 73 If an Error Occurs When the Machine Is Connected to a Computer When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message.
  • Page 74: An Error Message Is Displayed On The Lcd

    5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.
  • Page 75 However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible. (You will need to replace a particular part of the machine.) A communication time out occurs if an operation takes too long or if it takes too much time to send data.
  • Page 76: Lcd Cannot Be Seen At All

    Turn off the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in, and then turn on the machine. If the same error occurs, contact a Canon service representative.
  • Page 77: Cannot Install The Mp Drivers

    If the icon is still not displayed, try different discs and see if they are displayed. If other discs are displayed, there is a problem with the Setup CD-ROM. Contact a Canon service representative. Follow the procedure described in your setup sheet for proper installation.
  • Page 78: Cannot Connect To Computer Properly

    Cannot Connect to Computer Properly Printing Speed Is Slow / USB 2.0 Hi-Speed Connection Does Not Work Cause Your system environment is not fully compatible with USB 2.0 Hi-Speed. “This device can perform faster” Message Is Displayed Cause Your system environment is not fully compatible with USB 2.0 Hi-Speed.
  • Page 79: Print Results Not Satisfactory

    Print Results Not Satisfactory If the print result is not satisfactory such as white streaks, misaligned lines, and uneven colors, confirm the paper and print quality settings first. Check 1: Do the page size and type settings match the size and type of the loaded paper? When these settings are incorrect, you cannot obtain a proper print result.
  • Page 80: Printed Paper Curls Or Has Ink Blots

    Action When printing data with high color saturation such as photographs or images in deep color, we recommend using Photo Paper Pro or other Canon specialty paper. See “Media Types You Cannot Use” on page 10. Action Clean the Paper Feed Roller.
  • Page 81 Cause Inside of the machine is dirty. Printing on inappropriate type of paper. Paper is curled. Action When performing duplex printing, if the specified page size does not match the actual size of paper loaded in the paper source, the inside will become stained with ink, causing printed paper to become smudged.
  • Page 82: The Print Result Not Satisfactory When Copying

    Cause Printing on thick paper. Printing graphics with the Intensity setting in the printer driver set too high. Printing beyond the recommended printing area. Colors Are Uneven or Streaked Cause Print Head nozzles are clogged. Print Head is misaligned. The Print Result Not Satisfactory When Copying Cause The original document is not loaded correctly.
  • Page 83: Printing Does Not Start

    Printing Does Not Start Cause Ink tank is empty. Ink tank not installed in proper position. Open the Scanning Unit (Printer Cover) and check the ink lamps. Ink tank is not installed securely. Unnecessary print jobs are left in queue. / Computer problems. The machine is not ready.
  • Page 84: Machine Moves But Ink Is Not Ejected

    Machine Moves But Ink Is Not Ejected Cause Print Head nozzles are clogged. Ink tank is empty. The protective film is remaining. Troubleshooting Action See “When Printing Becomes Faint or Colors Are Incorrect” on page 52 and perform any necessary maintenance operations. See “An Error Message Is Displayed on the LCD”...
  • Page 85: Paper Does Not Feed Properly

    Paper Does Not Feed Properly Cause Printing on inappropriate type of paper. Paper Feed Roller is dirty. Paper not loaded properly. Too much paper loaded. Foreign object in the Rear Tray or Cassette. Envelopes not prepared or loaded properly. Inner Cover is not completely closed. Paper Does Not Feed from the Paper Source Specified in the Printer Driver Cause...
  • Page 86: Paper Jams

    If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. Do not load credit card-sized paper in the landscape orientation.
  • Page 87 (3)Close the Rear Cover, then turn on the machine. Wait until the jammed paper is automatically ejected. If you cannot remove the jammed paper or the paper jam error continues after removing the paper, contact your Canon service representative. Troubleshooting...
  • Page 88 81 to confirm that you are using the correct paper and are loading it into the machine correctly. If you cannot remove the paper or if the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative.
  • Page 89 If you cannot remove a sheet of paper or a teared piece of paper inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. Troubleshooting...
  • Page 90: Error Message Appears On The Computer Screen

    (3)Right-click the Canon XXX Printer icon, then select Properties. (4)Click the Ports tab to confirm the port settings. Make sure that a port named USBnnn (where “n” is a number) with Canon XXX Printer appearing in the Printer column is selected for Print to the following port(s).
  • Page 91 Error No.: 300 Is Displayed Cause The machine is not ready. Machine is not connected properly. Your machine is not selected in Printer on the Print dialog box. Error No.: 1700 Is Displayed Cause The ink absorber is almost full. Error No.: 1851 Is Displayed Cause Inner Cover was open when you...
  • Page 92: Error Message Appears On A Pictbridge Compliant Device

    For errors on non-Canon PictBridge compliant devices, check the error message displayed on the LCD and take the appropriate action to clear the error. For details, see “An Error Message Is Displayed on the LCD”...
  • Page 93 After a while, plug the power cord of the machine back in, turn on the machine, and then reconnect the PictBridge compliant device to the machine. If the same error occurs, contact your Canon service representative. Troubleshooting...
  • Page 94: Cannot Print Properly Through Infrared Communication

    See “Printing by Using the Photo Index Sheet” on page 33. Action Contact your Canon service representative. Important Never attempt to remove a memory card using a thin stick or a tweezers. Doing so may damage the machine.
  • Page 95: Scanning Problems

    Scanning Problems ScanGear Won’t Start Cause The scanner driver (ScanGear) is not installed. Other Scanning Troubles Refer to the Scanning Guide on-screen manual. Action Follow the procedure described in your setup sheet to reinstall the MP Drivers. Troubleshooting...
  • Page 96: Appendix

    Appendix How to Use the Documentation Provided Printed Documentation Setup Sheet Be sure to read this sheet first. This sheet includes instructions for setting up your machine and getting it ready for use. Quick Start Guide (This guide) Read this guide when starting to use the machine. After following instructions in your setup sheet, we recommend you read this guide to familiarize yourself with the basic operation of some of the main functions that can be performed on your machine.
  • Page 97: Reading The On-Screen Manuals

    You can view the on-screen manuals in the following way: To view the on-screen manual, double-click the XXX On-screen Manual shortcut icon on the desktop, or click Start > All Programs (or Programs) > Canon XXX Manual > XXX On-screen Manual (where “XXX” is your machine’s name).
  • Page 98: Specifications

    Specifications Printing resolution (dpi) Interface Print width Acoustic noise level Operating environment Storage environment Power supply Power consumption External dimensions Weight Print Head Multiple copy Intensity adjustment Zoom Appendix General Specifications 9600 (horizontal)* x 2400 (vertical) * Ink droplets can be placed with a pitch of 1/9600 inch at minimum. USB 2.0 High Speed IrDA Ver.1.2 *2*3...
  • Page 99 Default (Selections based on the machine setting), On, Off, “VIVID”*, “NR” (Noise Reduction)*, “Face”*, “Red eye”* * If using a Canon PictBridge-compatible camera, you can select it. Default (Off: No printing), Date, File No., Both, Off Default (Off: No trimming), On (follow camera’s setting), Off...
  • Page 100 MP Navigator EX: QuickTime v6.4 or later is needed (Macintosh only) Some functions may not be available with Windows Media Center. To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the Canon inkjet printer. Additional System Requirements for On-Screen Manuals Browser: Windows HTML Help Viewer Note: Microsoft Internet Explorer 5.0 or later...
  • Page 101: Safety Precautions

    Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use the machine safely. Do not attempt to use the machine in any way not described in this manual. Warning This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor.
  • Page 102 Cleaning the machine Use a damp cloth to clean the machine. Never use flammable solvents such as alcohol, benzene or thinners. If flammable solvents come in contact with electrical components inside the machine, it could cause a fire or electric shock. Always unplug the machine from the power outlet before cleaning the machine.
  • Page 103 Working around the Never put your hands or fingers in the machine while it is printing. machine Do not place any object on the machine. Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol, thinners, etc.) on top of the machine.
  • Page 104: Legal Limitations On Use Of Your Product And Use Of Images

    Legal Limitations on Use of Your Product and Use of Images It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.
  • Page 105: Users In The U.s.a

    1-516-328-5600 Canon U.S.A., INC. LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to the new or refurbished Canonbrand product (“Product”) packaged with this limited warranty, when purchased and used in the United States only.
  • Page 106 Separate Warranty. Non-Canon brand equipment and software that may be distributed with the Product are sold “as is” and without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed.
  • Page 107 Product (with instructions and a prepaid waybill), follow the enclosed instructions on how to ship your product to the Canon USA repair facility. Your Product must be returned in the shipping carton in which the replacement Product was packed and include the reference number, A COPY OF YOUR DATED PROOF OF PURCHASE (BILL OF SALE), and a complete explanation of the problem.
  • Page 108 Lake Success, NY 11042 Canon is a registered trademark of Canon Inc. ©2007 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may also be a registered trademark in other countries. Safety Precautions...
  • Page 109: Index

    Scanning Images 38 Specialty Media 8 Specifications copy 94 general 94 PictBridge 95 scan 95 Troubleshooting 68 Turning off the Machine 5 Turning on the Machine 5 Users in the U.S.A. Canon U.S.A., Inc. Limited Warranty - U.S. Only Index...
  • Page 110 Index...
  • Page 111: Ordering Information

    © 2007 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered trademark or trademarks in other countries. All other product and brand names are trademarks of their respective owners. As an ENERGY STAR Inc.
  • Page 112 The following ink tanks are compatible with this product. For information on product specifications, please visit our website at www.usa.canon.com QT5-1125-V01 XXXXXXXX ©CANON INC.2007 PRINTED IN THAILAND...

Table of Contents

Save PDF