Rotate the MANUAL dial and select the item to be assigned.
Press MANUAL.
Notes
Manual settings will be retained even if you change the assigned item of the MANUAL dial. However, if
you set [EXPOSURE] after setting [AE SHIFT] manually, [EXPOSURE] will override [AE SHIFT].
If you select [RESET] in step , all the items adjusted manually are reset to the default settings.
Tips
The functions of the items that can be assigned to the MANUAL dial are the same as those of menu
operation.
You can also assign menu items to the MANUAL dial by touching
[OTHER REC SET] (under
Acquiring location information (GPS) (HDR-CX500VE/CX505VE/CX520VE)
Set the GPS switch to ON (
to triangulate. When your camcorder triangulates successfully, it will record the location
information at the time movies and photos were recorded.
Using the supplied software, "PMB, " you can display where movies and photos were recorded on a map.
Notes
The indicator changes according to the strength of GPS signal reception.
Triangulating status
Function off
Difficult
Processing
Triangulating
Triangulating
[SHOOTING SET] category) [DIAL SETTING].
appears on the LCD screen). Your camcorder starts trying
GPS indicators
GPS reception status
The GPS switch is set to OFF, or the GPS receiver is not
No indicator
functioning normally.
Your camcorder cannot find a GPS signal, therefore, it
cannot triangulate. Use your camcorder in an open area.
Your camcorder is confirming the GPS signal, and will be
able to acquire location information soon. Wait until your
camcorder completes the triangulation.
Your camcorder is receiving a GPS signal, and can acquire
location information.
Your camcorder is receiving a strong GPS signal, and can
acquire location information.
(MENU)