hit counter script
Sony VGN-A517M User Manual
Sony VGN-A517M User Manual

Sony VGN-A517M User Manual

Vaio vgn-a series, vaio vgn-fs series
Table of Contents

Advertisement

N

User Guide

Personal Computer
V G N - A s e r i e s / V G N - F S s e r i e s

Advertisement

Table of Contents
loading

Summary of Contents for Sony VGN-A517M

  • Page 1: User Guide

    User Guide Personal Computer V G N - A s e r i e s / V G N - F S s e r i e s...
  • Page 2: Table Of Contents

    Contents Before Use ...6 Notice ...6 ...7 NERGY Documentation ...8 Ergonomic Considerations ...11 Getting Started ...13 Locating Controls and Ports...14 About the Indicator Lights ...27 Connecting a Power Source ...29 Using the Battery Pack ...30 Shutting Down Your Computer Safely ...37 Using Your VAIO Computer ...38 Using the Keyboard ...39 Using the Touch Pad ...42...
  • Page 3 Using Peripheral Devices...78 Connecting a Port Replicator ...79 Using the Mouse ...92 Connecting External Speakers ...95 Using the Remote Commander ...101 Connecting an External Display ...104 Selecting Display Modes...112 Using the Multiple Monitors Function ...115 Connecting an External Microphone ...118 Connecting a Universal Serial Bus (USB) Device...119 Connecting a Printer ...122 Connecting an i.LINK Device ...124...
  • Page 4 Precautions ...161 On Handling the LCD Screen ...162 On Using the Power Source ...163 On Handling Your Computer...164 On Handling Floppy Disks ...166 On Handling Discs ...167 On Using the Battery Pack...168 On Using Headphones...169 On Handling Memory Stick Media...169 On Handling the Hard Disk ...170 Troubleshooting ...171 Troubleshooting the optical disc drive...172...
  • Page 5 Support Options ...193 Sony Support Information ...193 e-Support ...194 Trademarks ...196...
  • Page 6: Before Use

    In the manual, the ™ or ® marks are not specified. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement.
  • Page 7: Energy Star

    Before Use NERGY As an E Partner, Sony has determined that this product meets the E guidelines for energy efficiency. NERGY NERGY The International E Office Equipment Program is an international program that promotes energy saving through NERGY the use of computers and their office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption.
  • Page 8: Documentation

    Troubleshooting Guide — Contains solutions to common problems. Recovery Guide — Contains an explanation of how to recover your computer's system if you need to. Booklets containing the following information: Sony Guarantee conditions, Safety Regulations, Modem Regulations, Wireless LAN Regulations and Bluetooth Regulations.
  • Page 9 Feeling creative? Click this icon for an overview of your software and check out our upgrade options. Wallpapers Click this icon and check out our most popular Sony and Club VAIO wallpapers. Links Click this icon and check out our most popular Sony and Club VAIO web sites. Before Use...
  • Page 10: Help And Support Center

    Help and Support Center Help and Support Center is a comprehensive resource for practical advice, tutorials, and demonstrations to help you learn to use Microsoft Windows XP and your computer. Use the Search feature, Index, or table of contents to view all Windows Help resources, including those that are on the Internet.
  • Page 11: Ergonomic Considerations

    Ergonomic Considerations You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations to both stationary and portable environments: Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touch pad, or external mouse.
  • Page 12 Before Use Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the display as well.
  • Page 13: Getting Started

    Getting Started This section describes how to get started with using your VAIO computer. Locating Controls and Ports (page 14) About the Indicator Lights (page 27) Connecting a Power Source (page 29) Using the Battery Pack (page 30) Shutting Down Your Computer Safely (page 37) Getting Started...
  • Page 14: Locating Controls And Ports

    Getting Started Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages. The following illustrations may appear different from your model, depending on the country or area of your residency.
  • Page 15 VGN-A series models Front Mute button/indicator (page 43) Volume buttons (page 43) Brightness button/indicator (page 43) Magnify screen button (page 43) S1 button (page 43) LCD screen (page 162) Keyboard (page 39) Touch pad (page 42) Power indicator (page 27) Battery indicator (page 27) Hard disk drive indicator...
  • Page 16 Speakers Num lock indicator (page 27) Caps lock indicator (page 27) Scroll lock indicator (page 27) Power button Auto luminance sensor (page 43) Getting Started...
  • Page 17 Back DC In port (page 29) Hi-Speed USB (USB 2.0) ports (page 119) Network (Ethernet) port (page 126) AV Out jack (page 108) Monitor (VGA) port (page 104) Air vent Supports high-/full-/low- speeds. Getting Started...
  • Page 18 Right You can use either drive eject button to eject the optical disc drive tray. The drive eject button located next to the optical disc drive functions only with the Microsoft Windows operating system. Drive eject button (page 45) Optical disc drive (page 45) Substitute drive eject button (page 45)
  • Page 19 Left Microphone jack (page 118) Headphones jack (page 95) ® i.LINK (IEEE1394) S400 port (page 124) Hi-Speed USB (USB 2.0) port (page 119) PC Card slot (page 54) PC Card eject button (page 54) Supports high-/full-/low- speeds. Getting Started...
  • Page 20 Bottom AV station/port replicator connector (page 79) Air vents LOCK/UNLOCK switch (page 30) RELEASE switch (page 30) Battery bay (page 30) CONNECT button (page 92) On selected models with wireless mouse functionality. Getting Started...
  • Page 21 VGN-FS series models Front LCD screen (page 162) Speakers Keyboard (page 39) Touch pad (page 42) Power indicator (page 27) Battery indicator (page 27) Hard disk drive/Optical disc drive indicator Memory Stick media indicator (page 27) WLAN (Wireless LAN) switch (on selected models only) WIRELESS LAN indicator (on selected models only) Headphones jack (page 95)
  • Page 22 Display lock latch S1 button (page 43) S2 button (page 43) Num lock indicator (page 27) Caps lock indicator (page 27) Scroll lock indicator (page 27) Power button Getting Started...
  • Page 23 Back Air vent Battery connector (page 30) Getting Started...
  • Page 24 Right PC Card eject button (page 54) PC Card slot (page 54) ® i.LINK (IEEE1394) S400 port (page 124) Memory Stick media slot (page 58) Hi-Speed USB (USB 2.0) ports (page 119) Monitor (VGA) port (page 104) DC In port (page 29) Your computer supports Memory Stick Duo media and Memory Stick PRO high speed and high capacity capabilities.
  • Page 25 Left Network (Ethernet) port (page 126) Modem port (page 62) Optical disc drive (page 45) Manual eject hole (page 172) Drive eject button (page 45) Getting Started...
  • Page 26 Bottom Port replicator connector (page 79) Air vents Getting Started...
  • Page 27: About The Indicator Lights

    About the Indicator Lights Your computer is equipped with the following indicator lights. Indicator Functions Power 1 Illuminates when the power of the computer is on, blinks in Standby mode, and turns off when the computer is in Hibernate mode or off. Battery e Illuminates when the computer is using battery power, blinks when the battery is running out of power, and double-blinks when the battery is charging.
  • Page 28 Indicator Functions Press the Scr Lk key to change how you scroll the display. Normal scrolling resumes when the Scr Lk indicator Scroll lock is off. The Scr Lk key functions differently depending on the program you are using and does not work with all programs.
  • Page 29: Connecting A Power Source

    Connecting a Power Source You can use either an AC adapter or a rechargeable battery pack as a power source for your computer. Using the AC Adapter Use the computer only with the supplied AC adapter. To use the AC adapter Plug one end of the power cord (1) into the AC adapter.
  • Page 30: Using The Battery Pack

    Using the Battery Pack The battery pack supplied with your computer is not fully charged at the time of purchase. Installing the Battery Pack To install the battery pack VGN-A series models Turn off the computer and close the LCD screen lid. Slide the LOCK/UNLOCK switch (1) on the bottom of the computer to the UNLOCK position.
  • Page 31 Remove the battery compartment cover. Slide the battery into the battery compartment cover. Turn over the battery attached to the battery compartment cover. Insert the tab on the battery compartment cover into the notch, and push the battery down into the compartment until it clicks into place.
  • Page 32 VGN-FS series models Turn off the computer and close the LCD screen lid. Slide the lock switch (1) to the UNLOCK position. Slide the battery into the battery compartment until it clicks into place. Slide the lock switch (1) to the LOCK position to secure the battery on the computer. When the computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
  • Page 33: Charging The Battery Pack

    Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of purchase. To charge the battery pack Install the battery pack. Connect the AC adapter to the computer. The computer automatically charges the battery (the battery indicator light flashes in a double blink pattern as the battery charges).
  • Page 34 Getting Started When the battery is running out of power, both the battery and power indicator lights blink. Keep the battery pack in the computer while it is directly connected to AC power. The battery pack continues to charge while you are using the computer. If the battery level falls below 10%, you should either attach the AC adapter to recharge the battery or shut down the computer and install a fully charged battery.
  • Page 35: Removing The Battery Pack

    Removing the Battery Pack You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while the computer is in Standby mode. To remove the battery pack VGN-A series models Turn off the computer and close the LCD screen lid.
  • Page 36 Raise the edge to remove the battery compartment cover. Open the tabs on the battery compartment cover to release the battery and remove it from the battery compartment cover. Insert the two tabs on the battery compartment cover diagonally into the notches and push the cover into the compartment until it clicks into place.
  • Page 37: Shutting Down Your Computer Safely

    Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer Turn off any peripherals connected to the computer. Click Start and then Turn Off Computer. The Turn off computer window appears.
  • Page 38: Using Your Vaio Computer

    Using Your VAIO Computer Once you have read and followed the information in the printed Specifications Guide, you can start using your computer safely and confidently. Read on to get the most out of using your computer. Using the Keyboard (page 39) Using the Touch Pad (page 42)
  • Page 39: Using The Keyboard

    Using Your VAIO Computer Using the Keyboard Your keyboard is very similar to a desktop computer keyboard, but has additional keys that perform model-specific tasks. For more information on the standard keys, see Help and Support Center and click on the Customizing your computer link.
  • Page 40: Combinations And Functions With The Fn Key

    Combinations and Functions with the Fn Key Some functions are not available until Windows is launched. Combinations/Feature Fn + % (F2): speaker switch (VGN-FS series only) Fn + 2 (F3/F4): speaker volume (VGN-FS series only) Fn + 8 (F5/F6): brightness control Fn + /T (F7): switch to the external display Functions...
  • Page 41 Combinations/Feature Fn + (F10): zoom (VGN-FS series only) Fn + (F12): Hibernate Functions Changes the screen resolution to magnify/restore the screen view. The default resolutions of the standard view and the magnified view are as follow: Standard view: 1280 x 800 pixels Magnified view: 1024 x 600 pixels The magnified view is not as clear as the standard view, as it is implemented by applying a lower resolution to the LCD screen with a higher resolution.
  • Page 42: Using The Touch Pad

    Using the Touch Pad The keyboard contains a cursor-pointing device, the touch pad (1). You can point to, select, drag, and scroll objects on the screen using the touch pad. Action Description Point Slide one finger on the touch pad to place the pointer (2) on an item or object. Click Press the left button (3) once.
  • Page 43: Using Special-Function Buttons

    Using Special-function Buttons Your computer is equipped with special buttons to help you use specific functions of the computer. VGN-A series models Special-function button Mute button Volume buttons (Volume down and Volume up) Brightness button Magnify screen button (Zoom) S1 button Functions Turns the volume on and off.
  • Page 44 When an external display is connected to the computer, the Magnify screen button is disabled. The magnified view is not as clear as the standard view. Pressing the Magnify screen button changes the resolution, thus may cause a defect to any running software that does not support change in resolution.
  • Page 45: Using The Optical Disc Drive

    Using the Optical Disc Drive Your computer is equipped with an optical disc drive. To insert a disc Turn on the computer. Press the drive eject button (1) to open the drive. The tray slides out. Place a disc in the middle of the tray with the label side facing up until the disc clicks into place. Close the tray by pushing it in gently.
  • Page 46 Using Your VAIO Computer If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled CD/DVD program. See the printed Troubleshooting Guide if you have problems using discs. The location of the drive eject button depends on the model your purchased. See Locating Controls and Ports (page 14).
  • Page 47 Due to the multiple formats of discs now available, when buying pre-recorded or blank discs for use with a VAIO computer, be sure to read the notices on the disc packaging carefully to check both playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee the compatibility of VAIO CD drives with discs that not compliant with the official "CD"...
  • Page 48 Using Your VAIO Computer Supports writing to DVD-RW discs compliant with DVD-RW version 1.1/1.2. Supports writing to DVD-R discs compliant with DVD-R for General version 2.0/2.1. Supports 8cm disc reading, but does not support 8cm disc writing. Writing to DVD+R DL (Double Layer) discs is available only on discs supporting DVD+R DL (Double Layer) recording. Notes on writing data onto a disc To make the data on a disc readable on an optical disc drive, you need to close the session when you eject it.
  • Page 49 Notes on playing DVDs To achieve optimum performance when playing DVDs, you should follow these recommendations. You can play DVDs using the optical disc drive and the DVD playback software, such as VAIO Zone or WinDVD. See the help file on such software for details. Close all open applications before playing a DVD movie.
  • Page 50: Playing Cds

    Playing CDs To play an audio CD Insert the disc into the optical disc drive. If nothing appears on the desktop once you insert an audio CD disc, then click Start, point to All Programs, and click to open a CD program, such as the SonicStage software. If the Audio CD window appears, click to select an option.
  • Page 51: Copying Files To Cds

    Copying Files to CDs To determine which type of CD your computer supports, see Reading and Writing CDs and DVDs To copy files to a CD-RW or CD-R Do not strike or shake the computer while writing data onto a disc. Insert a blank CD-R or CD-RW disc into the optical disc drive.
  • Page 52: Playing Dvds

    Playing DVDs To play a DVD Close all open programs. Insert the DVD into the optical disc drive. Click Start and point to All Programs. Select a DVD software program to play the DVD. For instructions on how to use a program, see the help guide included with the DVD software program. Copying Files to DVDs To copy files to a DVD-R or DVD-RW Connect the AC adapter to the computer.
  • Page 53: Using The Tv Function

    Stream your recorded TV contents via Ethernet (or WLAN) to connected PCs. Sony cannot guarantee the streaming of recorded content if it does not meet a certain level of high quality. For details on using the VAIO Zone software and the remote control, please see the dedicated guide. Otherwise read the help files within the software itself.
  • Page 54: Using Pc Cards

    Using PC Cards PC Cards allow you to connect portable external devices to your computer. Inserting a PC Card Some PC Cards or their functions may not be compatible with the computer. You do not need to shut down the computer before inserting or removing a PC Card. To insert a PC Card Insert the PC Card into the PC Card slot with the front label facing up.
  • Page 55 Using Your VAIO Computer Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you alternate between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not recognized.
  • Page 56: Removing A Pc Card

    Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly. To remove a PC Card To remove a PC Card when the computer is off, skip steps 1 to 7. If you remove the PC Card from the computer when it is still turned on, your system could malfunction and you might lose any unsaved data.
  • Page 57 Using Your VAIO Computer 10 Gently take hold of the Card and pull it out of the slot. 11 If the PC Card release button is still out, push it back in.
  • Page 58: Using The Memory Stick Media

    See the printed Specifications Guide to see which Memory Stick media types are compatible with your model and if there are any limitations. You can purchase Memory Stick media from the Sony Style website (www.sonystyle-europe.com), or from your local Sony dealer.
  • Page 59: Inserting A Memory Stick Media

    Inserting a Memory Stick Media There are two ways you can insert a Memory Stick media into your computer: Using the Memory Stick media slot; Using a PC Card slot. To do this, you need an optional PC Card adapter. You can only insert one Memory Stick media at a time.
  • Page 60 Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging the computer or the Memory Stick media, do not force the Memory Stick media into the slot if it does not insert smoothly. Do not insert more than one Memory Stick media into the Memory Stick media slot.
  • Page 61: Removing A Memory Stick Media

    Removing a Memory Stick Media To remove a Memory Stick media using the Memory Stick media slot Check that the Memory Stick media indicator is off. Push the Memory Stick media in toward the computer. The Memory Stick media ejects. Pull the Memory Stick media out of the slot.
  • Page 62: Using The Internet

    Using the Internet Setting Up a Dial-up Internet Connection Before you can connect to the Internet, you need to connect your computer to a telephone line via a telephone cable (not supplied). Once you set up your telephone cable, you're ready to connect to the Internet. To connect a telephone cable Plug one end of the phone cable (1) into the modem port Plug the other end into the wall jack (2).
  • Page 63: Using Wireless Lan (Wlan)

    (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings. The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and roaming. You can still access information, internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to another.
  • Page 64 Using Your VAIO Computer In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the WLAN functionality, read the Regulations Guide carefully. Channel selection is explained further in this manual (see Wireless LAN Channel Selection (page 71)).
  • Page 65: Communicating Without An Access Point (Ad-Hoc)

    Using Your VAIO Computer Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other central controller or Access Point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home.
  • Page 66 To communicate without an Access Point (ad-hoc) Turn on the WIRELESS or WIRELESS LAN switch. The WIRELESS LAN indicator lights up. On models with the Bluetooth functionality Switch window. Select the Enable 2.4 GHz Wireless LAN check box and click OK. Click Start and then Control Panel.
  • Page 67 13 Enter exactly the same Network key again, for confirmation. 14 Select the check box This is a computer-to-computer (ad hoc) network; wireless access points are not used at the bottom of the screen. 15 Click OK. Your Network name appears in the Preferred networks. 16 Click Advanced.
  • Page 68 To disconnect from a computer-to-computer (ad-hoc) network Click Start and then Control Panel. Click Network and Internet Connections. Click Network Connections. The Network Connections window appears. In the right panel under LAN or High-Speed Internet, double-click Wireless Network Connection. The Wireless Network Connection Status window appears. Click Properties.
  • Page 69: Communicating With An Access Point (Infrastructure)

    An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an Access Point, for example the Sony Access Point. The Access Point bridges the wireless and wired LAN and acts as a central controller for the Wireless LAN.
  • Page 70 To connect to a wireless network Turn on the WIRELESS or WIRELESS LAN switch. The WIRELESS LAN indicator lights up. On models with the Bluetooth functionality Switch window. Select the Enable 2.4 GHz Wireless LAN check box and click OK. Click Start and then Control Panel.
  • Page 71 Wireless LAN Channel Selection In an 802.11b/g configuration, channel 1 to 13 can be used. (a) With an Access Point ("Infrastructure") The channel used will be the channel selected by the Access Point. For details on how to select the channel that will be used by the Access Point, see the access point manual. (b) Without an Access Point ("ad-hoc") If the Wireless connection is initiated by the VAIO computer, channel 11 will be selected.
  • Page 72 Using Your VAIO Computer The 2.4 GHz bandwidth used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference from other devices that uses the same bandwidth are employed on wireless LAN compatible devices, such interference may cause lower communication speed, narrower communication range, or broken wireless connections.
  • Page 73: Using The Bluetooth Functionality

    Using the Bluetooth Functionality The Bluetooth functionality is available on selected models only. See the printed Specifications Guide to see whether your model supports the Bluetooth functionality. You can establish wireless communication between your computer and other Bluetooth devices such as another computer or a mobile phone.
  • Page 74 Notes on using the Bluetooth functionality The data transfer rate varies, depending on the following conditions: Obstacles, such as walls, located between devices Distance between devices Material used in walls Proximity to microwaves and cordless telephones Radio frequency interference and other environmental conditions Device configuration Type of software application Type of operating system...
  • Page 75 The 2.4 GHz band with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth devices use the technology to minimize the interference from other devices that use the same wave length. Communication speed and distances can be inferior to the standard values. Interference from other devices may also stop communications.
  • Page 76: Communicating With Another Bluetooth Device

    Using Your VAIO Computer Communicating with Another Bluetooth Device You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a mouse, or a digital camera without the use of any cables. To communicate with another Bluetooth device To communicate with another Bluetooth device, you need first to set up the Bluetooth functionality.
  • Page 77: Stopping The Bluetooth Connection

    To see the help file Right-click the Bluetooth icon Select Help from the Help menu. The passkey can be different each time, but must be the same at both ends. For certain devices, such as a mouse, no passkey can be entered. Stopping the Bluetooth Connection To stop the Bluetooth connection, turn off the WIRELESS switch.
  • Page 78: Using Peripheral Devices

    Using Peripheral Devices You can add functionality to your computer by using the various ports on your unit. Connecting a Port Replicator Using the Mouse (page 92) Connecting External Speakers Using the Remote Commander Connecting an External Display Selecting Display Modes (page 112) Using the Multiple Monitors Function Connecting an External Microphone...
  • Page 79: Connecting A Port Replicator

    Using Peripheral Devices Connecting a Port Replicator Attaching a port replicator enables you to connect additional peripherals to your computer, such as a printer and an external display. A port replicator may be supplied with your computer, depending on the model you purchased. If not, you can additionally purchase an optional port replicator.
  • Page 80 Locating Ports on the Port Replicator A/V port replicator for VGN-A series models Composite Audio In jacks (page 81) Composite Video In jack (page 81) S Video In port (page 81) VHF/UHF port (page 53) Hi-Speed USB (USB 2.0) ports (page 119) Monitor (VGA) port (page 105)
  • Page 81 To the A/V port replicator, you can connect an external video/audio source such as a video camera, VCR or DVD player. Connect your video/audio device's video cable to the S Video In or Composite Video In jack and the audio cable to the Composite Audio In Jacks. Business port replicator for VGN-A series models To the business port replicator, you can connect an external audio device such as a CD player.
  • Page 82 A/V port replicator for VGN-FS series models To the A/V port replicator, you can connect an external video/audio source such as a video camera, VCR or DVD player. Connect your video/audio device's video cable to the S Video In or Composite Video In jack and the audio cable to the Composite Audio In Jacks. Hi-Speed USB (USB 2.0) ports (page 119) Headphones/Speakers jack...
  • Page 83 Business port replicator for VGN-FS series models The port replicator can be powered only through the AC adapter supplied with the computer. Do not unplug the AC adapter from the port replicator and the AC outlet while using the port replicator; this may cause data damage or hardware malfunctions. The printer port on the port replicator is intended for printer connections only.
  • Page 84: Attaching Your Computer To The Port Replicator

    Attaching Your Computer to the Port Replicator To attach your computer to the port replicator VGN-A series models Disconnect all peripherals from the computer. Plug the power cord (1) into the AC adapter and an AC outlet. Plug the cable attached to the AC adapter (2) into the DC In port (3) on the port replicator (4). Using Peripheral Devices...
  • Page 85 Open the port replicator connector cover. Align the bottom connector of the computer with the connector on the port replicator and push down until it clicks into place. Using Peripheral Devices...
  • Page 86 Slide the lock switch to LOCK. Turn on the computer. Using Peripheral Devices...
  • Page 87 VGN-FS series models Disconnect all peripherals from the computer. Plug the power cord (1) into the AC adapter and an AC outlet. Plug the cable attached to the AC adapter (2) into the DC In port (3) on the port replicator (4). Open the port replicator connector cover.
  • Page 88 (Ethernet) port on the computer. Use the AC adapter supplied with the computer or the optional Sony adapter. Do not move the computer while attached to the port replicator; this may detach the port replicator and cause damage to the port replicator and the computer.
  • Page 89: Disconnecting Your Computer From The Port Replicator

    Disconnecting Your Computer from the Port Replicator To prevent loss of unsaved data, be sure to turn off the computer before disconnecting it from the port replicator. To disconnect your computer from the port replicator VGN-A series models Turn off the computer and the connected peripherals. Slide the lock switch to UNLOCK.
  • Page 90 Lift the computer away from the port replicator. Close the port replicator connector cover on the bottom of the computer. Using Peripheral Devices...
  • Page 91 VGN-FS series models Lift the computer away from the port replicator. Close the port replicator connector cover on the bottom of the computer. It is extremely important to close the port replicator connector cover after disconnecting the computer from the port replicator. If the cover is left open, dust may get inside and damage the computer.
  • Page 92: Using The Mouse

    Using the Mouse Your computer may be supplied with a wireless optical mouse, which has no cables to plug in and uses a light-emitting diode (LED) instead of a ball. You can use the mouse anywhere you feel comfortable within a range of approximately 80 cm computer.
  • Page 93 Before You Use the Mouse Before using the wireless mouse, you must establish communication between your computer and the mouse. Two batteries are supplied with your computer for use in the wireless mouse. To connect the wireless mouse Insert two AA batteries into the wireless mouse as shown. Turn on the computer.
  • Page 94 Turn over the wireless mouse, slide the power switch to the ON position, and press the CONNECT button. Communication between the wireless mouse and the computer should now be established. Step 3 and 4 must be completed within 10 seconds of each other. The two AA batteries supplied for use in the wireless mouse are identified by a sticker "For mouse"...
  • Page 95: Connecting External Speakers

    Connecting External Speakers A pair of external speakers may be supplied with your computer, depending on the model you purchased, for the enhancement of sound quality. See the printed Specifications Guide to see whether your model is supplied with external speakers. External speakers for VGN-A series models Volume control The right speaker is equipped with the volume control.
  • Page 96 External speakers for VGN-FS series models Headphones jack Volume control Turn clockwise or counterclockwise to adjust the speaker volume. Power button Turns on and off the speakers. Using Peripheral Devices...
  • Page 97 To connect the supplied external speakers External speakers for VGN-A series models Attach the computer to an A/V port replicator. Plug the volume cable (1) of the speaker to the Volume jack on the port replicator. Plug the speaker cables (2) to the Speaker jacks. Plug the USB cable (3) to one of the USB ports.
  • Page 98 Using Peripheral Devices To use a remote commander for volume control, make sure to connect the speaker's USB cable to the USB port. Make sure to place the external speakers in a stable position. Do not grasp the depression on the front of the speaker to take hold of it.
  • Page 99 External speakers for VGN-FS series models Attach the computer to an A/V port replicator. Plug the power cord (1) to the AC adapter and an AC outlet. Plug the cable attached to the AC adapter (2) to the right speaker (3). Plug the cable from the left speaker (4) to the speaker L jack on the right speaker.
  • Page 100 To connect other external speakers Plug the speaker cable (1) into the headphones jack (2) i. Plug the other end of the speaker cable to the external speaker (3). Turn down the volume of the speakers before you turn them on. Make sure your speakers are designed for computer use.
  • Page 101: Using The Remote Commander

    Using Peripheral Devices Using the Remote Commander A remote commander may be supplied with your computer to enable various remote operations, depending on the model you purchased. If not, you can additionally purchase a remote commander. The infrared receiver for communications with the remote commander supplied with VGN-A series models is located on the supplied left external speaker.
  • Page 102 With the remote commander, you can increase the volume only up to the level set by the volume control on the external speaker. MUTING button Turns off the external speakers. Press the MUTING button to turn on the speakers. Channel buttons Select the respective channels.
  • Page 103 To connect the external infrared receiver to VGN-FS series models Choose the USB port (1) you prefer to use. Plug the external infrared receiver cable (2) into the USB port. You can now use your infrared receiver (3). Using Peripheral Devices...
  • Page 104: Connecting An External Display

    Connecting an External Display You can connect an external display to your computer. For example, you can use the computer with a computer display or a projector. Connecting a Computer Display Connecting a Multimedia Computer Display Connecting a TV (page 108) Connecting a Projector (page 111) Connect the power cord after connecting all other cables.
  • Page 105: Connecting A Computer Display

    Connecting a Computer Display You can connect a computer display (monitor) either directly to your computer or via the (optional) port replicator. To connect a computer display VGN-A series models If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet. If you want to connect a VGA monitor, plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the port replicator.
  • Page 106 Using Peripheral Devices VGN-A series models are equipped with the DVI-D port. DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI connector that supports only digital video signals (no analog video signals). It has 24 pins. A DVI-I connector (Digital Visual Interface - Integrated) supports digital video and analog video signals.
  • Page 107: Connecting A Multimedia Computer Display

    Connecting a Multimedia Computer Display You can connect a multimedia computer display that includes built-in speakers and a microphone to your computer or via the (optional) port replicator. To connect a multimedia computer display Plug the power cord of the multimedia computer display (1) into an AC outlet. Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the port replicator.
  • Page 108: Connecting A Tv

    Connecting a TV You can connect a TV to VGN-A series models or to the port replicator. To connect a TV to the computer Plug the power cord of the TV (1) into an AC outlet. Plug one end of an audio/video cable (2) into the AV Out jack (3) T on the computer and the other to the TV. Switch the input channel of the TV to external input.
  • Page 109 Using Peripheral Devices See the manual supplied with your peripheral for more information on installation and use. If the display resolution of the computer is more than 1024 x 768 pixels, a part of the image cannot be displayed on your TV. The hidden area on your TV can be seen by moving the cursor on the computer.
  • Page 110 To connect a TV to the port replicator Attach the port replicator to the computer. Plug one end of an audio/video cable (1) into the Composite Audio Out jacks and the Composite Video Out Jack (2) on the port replicator and the other into the Composite Audio and Video jacks on your TV. If your TV has s-video input, you can have better visual quality by outputting image to s-video rather than composite video.
  • Page 111: Connecting A Projector

    Connecting a Projector You can connect a projector (for example, the Sony LCD projector) directly to your computer or via the (optional) port replicator. To connect a projector Connect the power cord (1) of the projector into an AC outlet.
  • Page 112: Selecting Display Modes

    Selecting Display Modes You can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected to your computer. The procedure for selecting a display depends on the video controller used in the computer. See the printed Specifications Guide for detailed information on the video controller.
  • Page 113 Models with the Intel video controller Click Start and then Control Panel. Click Appearance and Themes. Click Display. Click the Settings tab. Click Advanced. Click the tab with its name beginning with Intel(R). Click Graphic Properties. Select a display from the Display Devices menu. Click OK.
  • Page 114 Models with the NVIDIA video controller Click Start and then Control Panel. Click Appearance and Themes. Click Display. Click the Settings tab. Click Advanced. Click the tab with its name beginning with GeForce. Select nView Display Settings from the left menu. To change the current display, select the desired display from the Current display drop-down list.
  • Page 115: Using The Multiple Monitors Function

    Using the Multiple Monitors Function The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have an external display attached to the monitor (VGA) port, your computer's LCD and the external display can function as a single desktop.
  • Page 116 To select the Multiple Monitors mode To find which video controller your model includes, see the printed Specifications Guide. Models with the ATI video controller Click Start and then Control Panel. Click Appearance and Themes. Click Display. Select the Settings tab. Click the monitor icon marked 2.
  • Page 117 Models with the NVIDIA video controller Click Start and then Control Panel. Click Appearance and Themes. Click Display. Select the Settings tab. Click Advanced. Click the tab with its name beginning with GeForce. Select nView Display Settings from the left menu. Select Dualview from the nView Display Mode drop-down list.
  • Page 118: Connecting An External Microphone

    Using Peripheral Devices Connecting an External Microphone If you need to use a sound input device (for example, to chat on the Internet) you need to plug in an external microphone. To connect an external microphone Plug the microphone cable (1) into the microphone jack (2) m. Make sure your microphone is designed for computer use.
  • Page 119: Connecting A Universal Serial Bus (Usb) Device

    Connecting a Universal Serial Bus (USB) Device To prevent your computer and/or USB devices from damage, observe the following: When moving the computer with USB devices connected, avoid any shock or force to the USB ports. Do not put the computer into a bag or carrying case when it has USB devices connected. Connecting a USB Mouse To connect a USB mouse Choose the USB port (1)
  • Page 120: Connecting A Usb Floppy Disk Drive

    Connecting a USB Floppy Disk Drive You can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive Choose the USB port you prefer to use. Plug the USB floppy disk drive cable into the USB port. The VAIO logo on the disk drive should be facing up. Your USB floppy disk drive is now ready for use.
  • Page 121: Disconnecting A Usb Floppy Disk Drive

    Disconnecting a USB floppy disk drive You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. If the computer is off, you can unplug the USB cable directly from the computer.
  • Page 122: Connecting A Printer

    Connecting a Printer You can connect a Windows-compatible printer to your computer to print documents. Connecting a Printer Using the USB Port You can connect a USB printer compatible with your version of Windows to the computer. To connect a printer using the USB port Plug the printer power cord into an AC outlet (1).
  • Page 123: Connecting A Printer Using The Printer Port

    Connecting a Printer Using the Printer Port To connect a printer using the printer port Plug the printer power cord (1) into an AC outlet. Plug the printer cable (2) supplied with your printer into the printer port (3) replicator Depending on the model you purchased.
  • Page 124: Connecting An I.link Device

    Connecting an i.LINK Device Notes on connecting i.LINK devices The computer includes an i.LINK (IEEE1394) port, which you can use to connect to an i.LINK device such as a digital video camera recorder or to connect two VAIO computers in order to copy, delete or edit files. The i.LINK port of the computer does not supply power to external devices generally powered by i.LINK ports.
  • Page 125: Connecting A Digital Video Camera Recorder

    On Sony digital video cameras, ports labeled DV Out, DV In/Out or i.LINK are i.LINK-compatible. The Sony digital video camera recorder shown here is an example; your digital video camera recorder may need to be connected differently. You cannot access the pictures stored on a Memory Stick media when using an i.LINK connection.
  • Page 126: Connecting To A Network (Lan)

    Connecting to a Network (LAN) You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T-type networks Connect one end of an optional network cable to the Network (Ethernet) port on the computer or the (optional) port replicator and the other end to your network. For detailed settings and devices needed to connect to the network, see your Network Administrator.
  • Page 127 Network and telephone lines cannot be connected to the Network (Ethernet) port on the computer. If the following connectors are connected to the telephone lines mentioned below, high electric current to the connectors may cause damage, overheating or fire. - Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone) - Network lines such as 1000BASE-T, 100BASE-TX, and 10BASE-T lines (depending on the model you purchased) - Public telephone subscriber line - PBX (private branch exchange)
  • Page 128: Customizing Your Vaio Computer

    This section briefly describes how to change the main settings of your computer. Among other things, you will learn how to prepare your modem for use, how to use and customize the look of your Sony software and utilities, etc.
  • Page 129: Setting The Password

    Setting the Password Use one of the BIOS functions to set the password. Once you have set the password, you will have to enter the password after the VAIO logo appears. In this way, you can protect your computer from unauthorized access. Adding the Power-on Password You cannot start the computer without entering the power-on password.
  • Page 130 To add the power-on password VGN-A series models Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, press the F2 key several times. Use the < or , key to select Security and press the Enter key. The password entry screen appears.
  • Page 131 VGN-FS series models Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. Use the < or , key to select Security to display another screen, select Set Machine Password, and then press the Enter key.
  • Page 132: Changing/Removing The Power-On Password

    Changing/Removing the Power-on Password To change or remove the power-on password VGN-A series models Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, press the F2 key several times. Enter the current password for Input System Password: Use the <...
  • Page 133 VGN-FS series models Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, press the F2 key several times. Enter the current password for Enter Password: Use the < or , key to select Security to display another screen, select Set Machine Password, and then press the Enter key.
  • Page 134: Setting Up Your Computer With Vaio Control Center

    Setting Up Your Computer with VAIO Control Center The VAIO Control Center utility allows you to consult system information and specify preferences for system behavior. To use VAIO Control Center Click Start, point to All Programs, and click VAIO Control Center. The VAIO Control Center window appears.
  • Page 135: Using The Power Saving Modes

    Using the Power Saving Modes When you use a battery as the power source for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.
  • Page 136: Using Standby Mode

    Using Standby Mode Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber power light flashes in this mode. To activate Standby mode Click Start and then Turn Off Computer. Click Stand By.
  • Page 137 To change the Standby mode settings Click Start and then Control Panel. Click Performance and Maintenance. Click Power Options. The Power Options Properties window appears. Select the Power Schemes tab. Change the System Standby settings. Customizing Your VAIO Computer...
  • Page 138: Using Hibernate Mode

    Using Hibernate Mode In Hibernate mode, the state of the system is saved on the hard disk and power is turned off. Even when the battery runs down, no data will be lost. The power indicator light is off in this mode. To activate Hibernate mode Press the Fn+F12 keys.
  • Page 139 Customizing Your VAIO Computer If you do not use the AC adapter for a long period of time, put the computer into Hibernate mode. This power saving mode saves you the time of shutting down in the normal way. When the computer is in Hibernate mode, you cannot insert a disc. Hibernate mode requires more time than Standby mode to be activated.
  • Page 140: Managing Power With Vaio Power Management

    Customizing Your VAIO Computer Managing Power with VAIO Power Management Power management helps you to set up power schemes for running on AC power or batteries to suit your requirements for power consumption. VAIO Power Management is a software application developed exclusively for VAIO computers. With this software application, you can enhance the Windows power management functions to ensure better operations of your computer and for longer battery life.
  • Page 141 Activating VAIO Power Management When you start the computer, a power status icon appears on the taskbar. This icon indicates what kind of power source you are using at that time, for example, AC power. If you double-click this icon, the Power Meter window appears showing you the power status.
  • Page 142 Activating VAIO Power Management Power Schemes VAIO Power Management provides several predefined power schemes. Each power scheme consists of a group of power management settings that are designed to meet specific power management goals, ranging from maximum power management to no power management. To activate a VAIO Power Management power scheme Click Start and then Control Panel.
  • Page 143: Setting Up Your Language With Windows Xp Professional

    Setting Up Your Language with Windows XP Professional Windows XP Professional computers include the Multilingual User Interface (MUI) feature. It allows you to change the English operating system, some software applications and the keyboard layout into the language of your choice: French, German, Japanese, Dutch, Italian, Spanish, Czech, Finnish, Greek, Portuguese and Swedish.
  • Page 144 To change the country and language settings Click Start and then Control Panel. In the Control Panel window, double-click the Regional and Language Options icon. If you do not see this icon, click Switch to Classic View on the left side. In the Regional Options tab of the Regional and Language Options window, select your language from the Standards and formats drop-down menu.
  • Page 145 To change the keyboard layout Click Start and then Control Panel. In the Control Panel window, double-click the Regional and Language Options icon. If you do not see this icon, click Switch to Classic View on the left side. In the Languages tab of the Regional and Language Options window, click the Details button. The Text Services and Input Languages window appears.
  • Page 146: Upgrading Your Vaio Computer

    Upgrading Your VAIO Computer Your computer and memory modules use high precision components and electronic connectors technology. To avoid the invalidation of your guarantee due to mishandling, we recommend that: You contact your dealer to install a new memory module. You do not install it yourself, if you are not familiar with upgrading memory on a computer.
  • Page 147: Adding And Removing Memory

    Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages. The number of available slots depends on the configuration of your model.
  • Page 148 Use the special bag delivered with the memory module or wrap the module in aluminum foil to protect it from electrostatic discharge. Introducing any liquids or any foreign substances or objects into the memory slots, or other internal components of the computer, will result in damage to the computer and any repair costs will not be covered by the warranty.
  • Page 149: Removing And Installing A Memory Module

    Removing and Installing a Memory Module VGN-A series models To change or add a memory module to the memory module slot on the bottom of the computer Shut down the computer and disconnect all peripheral devices. Unplug the computer and remove the battery. Wait until the computer cools down.
  • Page 150 Touch a metal object (such as the connector panel on the back of the computer) to discharge static electricity. Remove the memory module: Pull the tabs in the direction of the arrows (1). The memory module is released. Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). Remove the new memory module from its packaging.
  • Page 151 Install the memory module. Slide the memory module into the slot. Push in the memory module until it clicks into place. Do not touch any other components on the motherboard. Close the memory module compartment cover and then tighten the screws on the bottom of the computer. 10 Reinstall the battery pack and turn on the computer.
  • Page 152 To change or add a memory module to the memory module underneath the keyboard Shut down the computer and disconnect all peripheral devices. Unplug the computer and remove the battery pack. Wait until the computer cools down. Unscrew the two screws next to the memory slot. Upgrading Your VAIO Computer...
  • Page 153 Turn over the computer upside down and open the LCD screen lid. Introduce a sharp object (such as a fine screwdriver) between the keys indicated on the picture (1) and push gently upwards. Lift the keyboard from the touch pad side, turn it over the indicators, and gently prop it up against the LCD display. Be careful not to detach the cable when lifting the keyboard.
  • Page 154 Touch a metal object (such as the connector panel on the back of the computer) to discharge static electricity. Remove the memory module: Pull the tabs in the direction of the arrows (1). The memory module is released. Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). 10 Remove the new memory module from its packaging.
  • Page 155 Upgrading Your VAIO Computer 11 Install the memory module. Slide the memory module into the slot. Push in the memory module until it clicks into place. Do not touch any other components on the motherboard.
  • Page 156 Upgrading Your VAIO Computer 12 Gently replace the keyboard and then press it into the computer. 13 Close the LCD screen lid and turn over the computer upside down. 14 Close the memory module compartment cover and then tighten the screws on the bottom of the computer. 15 Reinstall the battery and turn on the computer.
  • Page 157 VGN-FS series models To change or add a memory module Shut down the computer and disconnect all peripheral devices. Unplug the computer and remove the battery pack. Wait until the computer cools down. Unscrew the screw (indicated by the arrow below) on the bottom of the computer and remove the memory module compartment cover.
  • Page 158 Touch a metal object (such as the connector panel on the back of the computer) to discharge static electricity. Remove the memory module: Pull the tabs in the direction of the arrows (1). The memory module is released. Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). Upgrading Your VAIO Computer...
  • Page 159 Remove the new memory module from its packaging. Slide the memory module into the memory module slot and push it in until it clicks into place. Do not touch any other components on the motherboard. Do not damage the inner film cover equipped for module protection. Replace the memory module compartment cover.
  • Page 160: Viewing The Amount Of Memory

    Viewing the Amount of Memory To view the amount of memory Turn on the computer. Click Start, point to All Programs, and click VAIO Control Center. Double-click the System Information folder in the VAIO Control Center window. Double-click the System Information icon in the System Information folder. You can view the amount of system memory.
  • Page 161: Precautions

    Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage. On Handling the LCD Screen On Using the Power Source (page 163) On Handling Your Computer (page 164) On Handling Floppy Disks (page 166) On Handling Discs (page 167) On Using the Battery Pack...
  • Page 162: On Handling The Lcd Screen

    Precautions On Handling the LCD Screen Do not leave the LCD facing the sun. This could damage the LCD. Be careful when using the computer near a window. Do not scratch the LCD or exert pressure on it. This could cause a malfunction. Using the computer in low temperature conditions may produce a residual image on the screen.
  • Page 163: On Using The Power Source

    Make sure that the AC outlet is easily accessible. When the AC adapter is not used, unplug it from the AC outlet. Use the AC adapter supplied with the computer or genuine Sony products. Do not use any other AC adapter as it may cause a malfunction.
  • Page 164: On Handling Your Computer

    On Handling Your Computer Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of the computer. If you drop a solid object or any liquid onto the computer, shut down the computer and then unplug it.
  • Page 165 Precautions Do not use cut or damaged connection cables. If the computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In this case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact VAIO-Link.
  • Page 166: On Handling Floppy Disks

    Precautions On Handling Floppy Disks Do not open the shutter manually or touch the surface of the floppy disk. Keep floppy disks away from magnets. Keep floppy disks away from direct sunlight and other sources of heat. Keep the floppy disk away from any liquid. Do not let the floppy disk get wet. When you are not using the floppy disk, always remove it from the floppy disk drive and use a storage case.
  • Page 167: On Handling Discs

    Precautions On Handling Discs Do not touch the surface of the disc. Do not drop or bend the disc. Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole, as shown below: Proper care of the disc is essential to its continuous reliability.
  • Page 168: On Using The Battery Pack

    Precautions On Using the Battery Pack Do not leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight. Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures. Charge the batteries at temperatures between 10°C to 30°C.
  • Page 169: On Using Headphones

    On Using Headphones Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings.
  • Page 170: On Handling The Hard Disk

    On Handling the Hard Disk The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock or dust. Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling the computer.
  • Page 171: Troubleshooting

    Troubleshooting This section describes how to solve common problems you might encounter when using your computer. Many problems have simple solutions. Try these suggestions before contacting VAIO-Link. Troubleshooting the optical disc drive Troubleshooting PC Cards (page 175) Troubleshooting the modem (page 175) Troubleshooting the Bluetooth functionality Troubleshooting Wireless LAN...
  • Page 172: Troubleshooting The Optical Disc Drive

    Troubleshooting the optical disc drive My optical disc drive tray does not open Make sure the computer is turned on and press the disc eject button. Try first the drive eject button. If this button does not work, then press the substitute drive eject button on the optical disc drive. The drive eject button is disabled until you start the computer and log on to windows.
  • Page 173 I cannot play a DVD If a region code warning appears when you are using your DVD player, it could be that the DVD you are trying to play is incompatible with the optical disc drive on the computer. The region code is listed on the packaging of the disc. Change the resolution under Control Panel - Display to a lower resolution.
  • Page 174 I cannot play a DVD when using two screens You will not have a problem in the following situations: When you use a CRT or an LCD display on its own. When you play MPEG files which are recorded on the hard disk drive with Windows Media Player 10 or VAIO Zone. The reading speed of CD/DVD-RWs is very slow Generally, the reading speed of a CD/DVD-RW is slower than that of a -ROM or -R.
  • Page 175: Troubleshooting Pc Cards

    Troubleshooting PC Cards My PC Card is not working Make sure the PC Card is compatible with your version of Windows. Troubleshooting the modem My modem does not work or cannot establish a connection Check that the phone line is plugged into the computer. Make sure that the modem is the only device connected to your phone line.
  • Page 176: My Modem Connection Is Slow

    Only DTMF (Dual Tone Multi Frequency) signaling (tone dialing) is supported. The internal modem is intended to be used for data and fax communications using DTMF (Dual Tone Multi Frequency) signaling (tone dialing) on the PSTN (Public Switched Telephone Network) networks in the following countries: Austria, Belgium, Czech Republic, Denmark, Finland, France, Greece, Germany, Iceland, Ireland, Italy, Luxembourg, Norway, Portugal, Spain, Sweden, Switzerland, the Netherlands and the United Kingdom.
  • Page 177: Troubleshooting The Bluetooth Functionality

    Troubleshooting the Bluetooth functionality I cannot use the Bluetooth functionality If the Bluetooth indicator is off, turn on the WIRELESS switch. You cannot use the Bluetooth functionality when the computer is in a power saving mode. Return to normal mode, then turn on the WIRELESS switch.
  • Page 178 I cannot communicate with the other device although the distance between both devices is within 10 meters The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices, on radio wave quality, on the operating system or the software used. Try to move the computer or to place both devices closer. If the device with which you want to communicate is already communicating with another Bluetooth device, it may not be found or it may not be able to communicate with the computer.
  • Page 179 Troubleshooting I cannot connect to a Bluetooth device in Personal Area Network User mode If the device to which you want to connect supports Bluetooth communiation in Personal Area Network mode only, you cannot establish a connection from your computer.
  • Page 180: Troubleshooting Wireless Lan

    Troubleshooting Wireless LAN I cannot use the Wireless LAN functionality Check if the WIRELESS or WIRELESS LAN switch is turned on and the WIRELESS LAN indicator is lit. The Wireless LAN Access Point and your computer cannot communicate Check if the WIRELESS or WIRELESS LAN switch is turned on and the WIRELESS LAN indicator is lit. Check if the power of the Access Point is turned on.
  • Page 181: I Cannot Access The Internet

    The data transfer speed is slow The maximum communication speed can vary depending on the obstacles or the distance between the communication devices, the radio waves, the operating system or the software you use. Remove the obstacle or make the distance between the Access Point and your machine smaller.
  • Page 182 I cannot use a Wireless LAN network Check if the Wireless Zero Configuration service is active. To check the status of the Wireless Zero Configuration service Click Start and then Control Panel. The Control Panel window appears. Click the Performance and Maintenance icon. Click the Administrative Tools icon.
  • Page 183: Troubleshooting Power Management

    Troubleshooting Power Management The power management setting is not responding The computer's operating system may become unstable if a lower power state, such as Hibernate is initiated, and then changed before the computer completely enters the lower power state. To restore the computer to its normal operating stability Close all open applications.
  • Page 184: Troubleshooting External Displays

    Troubleshooting Troubleshooting External Displays I cannot use the Plug and Display function Depending on the external display or the way it is connected, the Plug and Display function may not be available. Use the Fn+F7 keys to select the output destination. I cannot display contents on two or more displays at the same time You cannot display contents on multiple external displays at the same time.
  • Page 185 The external display with the DVI-D port does not display properly This troubleshooting entry applies to selected models only. See Locating Controls and Ports model is equipped with the DVI-D port. If your computer is supplied with a port replicator, the port replicator may also have the DVI-D port.
  • Page 186: Troubleshooting Sound (Speaker)

    Troubleshooting Sound (Speaker) My speakers are not producing sound VGN-A series The built-in speakers may be turned off (the Mute % indicator is on). Press the Mute button to turn on the speakers. The speaker volume may be turned to the minimum. Press the Volume up button to increase the volume. VGN-FS series The built-in speakers may be turned off.
  • Page 187: Troubleshooting Sound (Microphone)

    Troubleshooting Sound (Microphone) My microphone does not work If you are using an external microphone, check that the microphone is plugged into the microphone jack correctly. My microphone volume is too high or too low Proceed as follows to adjust the volume. Click Start and then Control Panel.
  • Page 188 Only left-channel audio is recorded with a monaural microphone This troubleshooting entry applies to VGN-A series models only. Proceed as follows to change the audio channel setting. Click Start and then Control Panel. The Control Panel window appears. Click Sounds, Speech, and Audio Devices and then Sounds and Audio Devices. Click Volume under Sound recording on the Audio tab.
  • Page 189: Troubleshooting Floppy Disks

    Troubleshooting Floppy Disks My USB floppy disk drive cannot write to a floppy disk The floppy disk is write-protected. Disable the write-protect feature or use a floppy disk that is not write-protected. Check that the disk is properly inserted into the floppy disk drive. Your disk may be corrupt.
  • Page 190: Troubleshooting Printers

    Troubleshooting Printers Make sure that the printer driver supports Windows XP. Ask the manufacturer of your printer for the driver that supports Windows XP. The printer port on the port replicator is internally connected to the USB. If your printer is connected to the printer port on the port replicator, proceed as follows to check the printer port settings.
  • Page 191 If the bidirectional communication functions are provided with your printer, disabling the functions on the computer may enable printing. Proceed as follows: Click Start and then Control Panel. Click the Printers and Other Hardware icon. Click the Printers and Faxes icon. Right-click the printer to select Properties.
  • Page 192: Troubleshooting I.link Devices

    Check the connection and then turn on the power again. You are strongly advised to use only Sony i.LINK cables, as using other brands may cause problems with the i.LINK devices.
  • Page 193: Support Options

    VAIO-Link help lines: Before contacting VAIO-Link by telephone, try to solve the problem by reading the online and printed documentation. Visit the other Sony web sites: www.club-vaio.com if you want to know more about VAIO and become part of the growing VAIO community.
  • Page 194: E-Support

    Support Options e-Support What is e-Support? You have searched our user guides and web site (www.vaio-link.com) but have not found an answer to your question/issue? e-Support is the ideal solution for you! Our e-Support Web Portal is an interactive web site on which you can submit any technical query you may have regarding your computer and receive answers from our dedicated support team.
  • Page 195 Support Options Can I submit my questions at any time? Yes, you can submit your questions 24/7, but please keep in mind that our e-Support Team can only treat your queries from Monday till Friday between 8am and 6pm. Is there a cost involved for using e-Support? No, this is a complete free of charge service offered to all registered VAIO customers! How do I know when the e-Support Team has handled my query/case? As soon as your case has been dealt with by our e-Support Team, you will receive an email, notifying you that your case has...
  • Page 196: Trademarks

    Microsoft Corporation in the U.S. and other countries. i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394 connection. Adobe, Adobe Acrobat Elements, Adobe Acrobat Professional, Adobe Reader, Adobe Premiere Standard and Adobe Photoshop Elements are trademarks of Adobe Systems Incorporated.
  • Page 197 Support Options The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. All other names of systems, products and services are trademarks of their respective owners. In the manual, the ™ or ®...
  • Page 198 © 2005 Sony Corporation...

Table of Contents