Related Manuals for Sony LMD-2735MD
Summary of Contents for Sony LMD-2735MD
- Page 1 � 4-584-947-14(1) 2020-02 LCD Monitor lnstructions for Use Before operating the unit, please read this manual thoroughly and retain it for future reference. LMD-2735MD LMD-2435MD 2016 Sony Corporation...
-
Page 2: Symbols On The Product
Tue Sony LMD-2735MD/2435MD LCD Monitor are intended to provide 2D color video displays of images from surgical endoscopic/laparoscopic camera systems Follow the warnings in the instructions for use and other compatible medical imaging systems. for parts of the unit on wbich this symbol Tue LMD-2735MD/2435MD monitor are a widescreen, appears. -
Page 3: For Customers In The U.s.a
- Relocate the unit with respect to the affected devices. - Connect the unit and the affected devices to different brauch circuits. For more information, consult qualified Sony service personnel. (Applicable standard: IEC 60601-1-2) CAN ICES-3 (A)/NMB-3(A) This unit has been certified according to Standard CAN/ CSA-C22.2 No. -
Page 4: Guidance And Manufacturer's Declaration - Electromagnetic Emissions
• If the LMD-2735MD/2435MD will be used adjacent to or stacked with other equipment, normal operation of the LMD- lmportant EMC notices for use in medical ienvironments • Tbe LMD-2735MD/2435MD needs special precautions regarding EMC and needs to be installed and put into service according to tbe EMC infonnation provided in tbe instructions for use. - Page 5 The LMD-2735MD/2435MD is intended for use in the electromagnetic environment specified below. The customer or the user of the LMD-2735MD/2435MD should assure that it is used in such an environment. Compliance level IEC 60601 Immunity test Electromagnetic environment - guidance...
-
Page 6: Guidance And Manufacturer's Declaration - Electromagnetic Immunity
The LMD-2735MD/2435MD is intended for use in the electromagnetic environment specified below. The customer or the user of the LMD-2735MD/2435MD should assure that it is used in such an environment. IEC 60601 Immunity test Compliance level Electromagnetic environment - guidance... - Page 7 To assess the electromagnetic environment due to fixed RF transrnitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the LMD-2735MD/2435MD is used exceeds the applicable RF compliance level above, the LMD-2735MD/2435MD should be observed to verify normal operation.
- Page 8 The LMD-27 35MD/ 2435MD is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. Portable RF communications equipment should be used no closer than 3 0 cm (1 2 inches) to any part of the LMD-2735MD/2435MD. Otherwise, degradation of the performance of this equipment could result. IEC 60601...
- Page 9 - Top side: 30 cm ( 1 1 7 /s in.) or more ( V oltage, Ampere). lf you have questions on the use of the above Power Consult with Sony qualified personnel for the following Cord / Appliance Connector / Plug, please consult a types of installation location.
- Page 10 SONY LIMITED WARRANTY - Please visit www.sony.com/psa/warranty for important information and complete terms and conditions of Sony' s limited warranty applicable to this product. For the customers in Canada S ONY LIMITED WARRANTY - Please visit This symbol indicates that this product and its www.sonybiz.ca/pro/lang/en/ca/article/resources...
- Page 11 PIP / POP menu ..........25 Input Configuration menu ......26 System Confi ation menu ......27 Initial Setup menu ..........28 Preset menu ............29 LMD-2735MD ............35 LMD-2435MD ............35 Table of Contents ............. 12 ............................
-
Page 12: Precautions For Connecting This Unit With Other Medical Devices
- the RESPONSIBLE ORGANIZATION should strain, fatigue, or nausea) while watching video identify, analyze, evaluate and control these RISKS; images. Sony recommends that all viewers take regular - subsequent changes to the IT-NETWORK could breaks while watching video images. The length and introduce new RISKS and require additional analysis;... -
Page 13: On Simultaneous Use With An Electrosurgical Knife, Etc
When the the monitor becomes warm, the screen returns to temperature error is displayed, contact an authorized normal Sony dealer. On simultaneous use with an electrosurgical knife, etc. On a Long Period of Use... -
Page 14: On Moisture Condensation
The finish of the surface may deteriorate or the coating may come off. • SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO Do not throw away the carton and packing materials. -
Page 15: Control Panel
This monitor displays color video images that are output from medical imaging systems on the LCD (liquid crystal display) panel. Liquid crystal and color filters are laid on the front of flat light source (backlight) on the LCD panel. And then, the LCD panel displays images by controlling the aperture of the liquid crystal according to input signals. -
Page 16: Location And Function Of Parts And Controls
0 Power indicator Turns on or off the assigned function. You can ad just the assigned function by pressing the +/♦ buttons. (Refer to When the power is turned on, the power indicator lights the custom buttons of the system configuration menu on in green. - Page 17 0 1 ) 0 1 ) -EJ PORT A: Displays the input signal assigned to When the unit switches to the standby state, the power PORTA. When the input signal of PORTA is indicator lights in orange. displayed, a menu which allows you to select the input signal tobe assigned to PORTA is displayed.
-
Page 18: Rear/Bottom Panel
Connect to the network by using a lOBASE-T /lO0BASE Connects the supplied AC power cord. TX LAN cable (non-shielded type of 5 or more category, optional). Sony AC-120MD (DC input) connector Connect the DC connector of the separately sold AC adaptor. -
Page 19: Connecting The Power Cord
2) Transmission distance HD-SDI: 100 m (approx. 328 ft) max. (When using SC-FB coaxial cables (Fujikura. Inc.) or equivalent.) SD-SDI: 200 m (approx. 656 ft) max. (When using SC-2V coaxial cables (Fujikura. Inc.) or equivalent.) Q -8 HDIS input connector (D-sub 15-pin, female) The Plug &... -
Page 20: Initial Setting
Switch the unit to the standby state by pressing the side ofthe 1 (On)/ C> (Standby) switch, then remove the AC power cord When using the separately sold AC adaptor, switch the unit to the standby state, remove the When you turn on the unit for the fi r st time after AC power cord from the AC adaptor, then remove the purchasing it, select the area and language where you DC connector from the unit. - Page 21 Press the ♦ or + button to select the area where you intend to use the unit and press the ♦ button. When the confümation screen is displayed, press the • or • button to select Yes and press the CONTROL button.
-
Page 22: Using The Menu
The unit is equipped with an on-screen menu for making various adjustments and settings such as picture control, input setting, setting change, etc. To change the menu language, refer to "To change the menu language" on page 21. Press the ♦/+ button to select "Language:' The selected item is displayed in blue. -
Page 23: Adjustment Using The Menus
The selected tab is shown in blue, and setting items of the selected tab appear. Select an item. Press the ♦/♦ button to select the item. The item to be changed is displayed in blue. Make the setting or adjustment on an item. The screen menu of this monitor consists of the When changing the adjustment level: following items. -
Page 24: Adjusting And Changing The Settings
Input Name Power Supply HDCP Setting Auto Input Select Control Lock OSD Setting Power On Setting Power Save Serial Remote Ethernet Setting Custom Button Panel Display Monitor Information � Initial Setup Language Port A Input Select Port B Input Select Pattern Skip PIP / POP Custom Button... -
Page 25: Screen Control Menu
The Screen Control menu is used to set the image display setting for each input. The PIP / POP menu is used to set the display mode for the multi-image display and for each input. Submenu Setting Submenu Setting Sets the ACC (Auto Color Control) Shift V Adjusts the vertical position of the »... - Page 26 HDCP Setting Sets the HDCP setting for signals input in the DVI-D-E) connector. • Enable: Sets to use the signals protected with HDCP. Disable: Sets to use the signals not protected with HDCP. When "Disable" is set for the signals not protected with HDCP, signals are output from the DVI-D G-...
-
Page 27: System Configuration Menu
• Auto: The format and scan mode are displayed for about 3 seconds when the content of Status Display is changed. On: The format and scan mode are always displayed. • Off: The format and scan mode are not displayed. •... -
Page 28: Initial Setup Menu
The Initial Setup menu is used to set the default preset value. Sleep Mode Sets the sleep mode to on or off. When you set to "On;' the monitor enters into power saving mode by tuming off the backlight if there is no input signal from the selected connector for more than 1 rninute. -
Page 29: Troubleshooting
This section may help you isolate the cause of a problem and as a result, eliminate the need to contact technical support. • The display is colored in green or purple - When HDlS is selected, perform the RGB/YPbPr selection correctly. -
Page 30: Error Messages
When the following messages appear on the screen, turn off the power and contact an authorized Sony dealer. LCD panel a-Si TFT Active Matrix Pixel efficiency 99.99% Viewing angle (panel specification) ( typical) ( up/ down/ left/right, contrast > 10:1) - Page 31 EXPIRATION OF THE WARRANTY, OR FOR Maximum: approx. 57 W ANY OTHER REASON WHATSOEVER. Operating conditions • SONY WILL NOT BE LIABLE FOR CLAIMS OF Temperature ANY KIND MADE BY USERS OF THIS UNIT 0 °C to 35 °C (32 °F to 95 °F) OR MADE BY THIRD PARTIES.
-
Page 32: Pin Assignment
480/59.94i 480/60i 480/60p 576/S0i 576/S0p 720/59.94p 720/60p 720/S0p 1080/59.94i 1080/60i 1080/SOi 480/59.94i 480/60p 575/S0i 576/S0p 720/59.94p 720/60p 720/S0p 1080/59.94i 1080/60i 1080/SOi 1080/59.94p 1080/60p 1080/SOp Pin assignment Available signal formats SERIAL REMOTE (RS-232() connector Analog signal D-sub 9-pin, female Signal Input connector format VIDEO S-VIDEO... - Page 33 Analog PC signal VESADMT Resoluti o n Dotclock Sync. polar i t y [MHz] [kHz] [IHz] Hori z ontal Verti c al 640 x 480 60 Hz 25.175 31.469 59.940 Negative Negative 600 56 Hz 36.000 35.156 56.250 Positive Positive 600 60 Hz 40.000 37.879...
- Page 34 Range ofDVI input signal Vertical frequency: 50.0 Hz to 85.1 Hz Horizontal frequency: 31.5 kHz to 75.0 kHz Dot clock: 25.175 MHz to 148.5 MHz Picture size, phase: automatic discrimination by the DE (Data Enable) signal Resoluti o n Sync. pol ar i t y Dotclock [MHz] [kHz]...
- Page 35 Approx. 8.7 kg {19 lb 2.9 oz) (when the optional stand is not installed) Side Dimensions When an optional stand SU-600MD is attached 78 (3 1 /s) LMD-2735MD 28. 8 (1 3 '16) Front When an optional stand SU-600MD is attached 658 8 (26) !+- - ---------------- 116.5 (4 5/s)
- Page 36 Mass: Approx. 6.7 kg (14 lb 12 oz) (when the optional stand ,..� Unit: mm (inches) is not installed) Rear (VESA Mount lnstruction) 100 (4 - � r-- � ,..C\I '<t �---+------ • • • • • * Length of M4 screws (4) Attached object Monitor cabinet Side...
- Page 37 Sony Europe B. V. Da Vlncilaan 7-01, I M P 1930 Zaventem, Belgium Sony Belgium, bijkantoor van Sony Europe B, V: Da Vincilaan 7-D 1, 1930 Zaventem, Belglum Sony Corporation 1-7-1 Konan Mlnato-l<u Tokyo, 108-0075 Japan...