Related Manuals for HP P22v G5
Summary of Contents for HP P22v G5
- Page 1 Maintenance and Service Guide P22v G5 model SUMMARY This guide provides information about spare parts, removal and replacement of parts, diagnostic tests, problem troubleshooting, and more.
- Page 2 AMD is a trademark of Advanced Micro sure to read “Important Safety Information”. Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. NVIDIA is a trademark and/or registered trademark of NVIDIA Corporation in the U.S. and other countries.
-
Page 3: Table Of Contents
Table of Contents 1 Getting started ................................1 Important safety information ..........................1 Important service information and precautions ....................1 RoHS (2002/95/EC) requirements ........................2 General descriptions ............................2 Firmware updates ..............................2 Before returning the repaired product to the customer .................. 2 2 Monitor features ................................. -
Page 4: Getting Started
Getting started Read this chapter to learn about safety information and where to find additional HP resources. Important safety information Carefully read the cautions and notes within this document to minimize the risk of personal injury to service personnel. The cautions and notes are not exhaustive. Proper service methods are important to the safe, reliable operation of equipment. -
Page 5: Rohs (2002/95/Ec) Requirements
Level 2: Circuit board or standard parts replacement Firmware updates Firmware updates for the monitor are available at support.hp.com. If no firmware is posted, the monitor does not need a firmware update. Before returning the repaired product to the customer Perform an AC leakage current check on exposed metallic parts to be sure the product is safe to operate without the potential of electrical shock. -
Page 6: Monitor Features
● Removable stand for Flexible monitor head mounting solutions ● HP Quick Release 2 device to quickly attach the monitor head to the stand with a simple click, and then remove it with the convenient sliding tab release ● High-Definition Multimedia Interface™ (HDMI) video input (cable included) ●... -
Page 7: Front Components
Front components To identify the components on the front of the monitor, use this illustration and table. Table 1-1: Front components and their descriptions Component Description Power button Turns the monitor on or off. Power LED Indicates that the monitor is powered on. -
Page 8: Rear Components
Rear components To identify the components on the rear of the monitor, use this illustration and table. Table 1-2: Rear components and their descriptions Component Function Security cable slot Connects an optional security cable. Power connector Connects an AC adapter. HDMI port Connects the HDMI cable to a source device such as a computer or game console. -
Page 9: Locating The Serial Number And Product Number
The SPEC label (1) and Barcode label (2) are located on the rear of the monitor. The serial number and product number are located on a Safety label. You may need these numbers when contacting HP about the monitor model. -
Page 10: Illustrated Parts Catalog
Illustrated parts catalog To identify the monitor major components, use this illustration and table. Item Description DECO PANEL SPS BD MAIN BD MAIN SHD CTRL BD CVR VESA CLUMN BASE... -
Page 11: How To Order Parts
How to order parts The HP authorized repair center can purchase the power board from HP. Power board Description HP spare part number Manufacturer part number SPS-IPS V22v P22v G5 AUO N16672-001 5E.5M502.001 5E.5M502.001 SPS-IPS V22v P22v G5 CSOT N16672-002 5E.5M502.002... -
Page 12: Removal And Replacement Procedures
Removal and replacement procedures Adherence to these procedures and precautions is essential for proper service. Preparation for disassembly Use this information to properly prepare to disassemble and reassemble the monitor. Read the “Important safety information” and “Important service information and precautions” sections in the “Getting started”... -
Page 13: Rear Cover
Rear Cover Picture Operation Disassembly VESA COVER from RC. 1. Disassembly screw (8F.00729.011) * 4pcs、(8F.HA334.5R0) * 2pcs. 2. Disassembly RC from Bezel. Disconnect OSD -BD with FFC. 1. Tear off tape (3H.04054.071) *1pc 2. Disassembly screw (8F.MA564.6R0) * 2pcs. 3. Disassembly CTRL-BD and RC. - Page 14 1. Disconnect PWR-BD with panel light 2. Disconnect ITF-BD to panel with LVDS. 3. Tear off conductive adhesive tape(4G.13A09.001) *2pc. 4. Disassemble MAIN-SHD with Bezel. Disassemble safety Mylar (4K.5M301.001). Unfixed screw (8F.VC434.9R0) *6pcs. PWR-BD ITF-BD Unfixed screw (8F.205B4.019) *2pc.
- Page 15 Take off CTRL BD wire and USB bd wire from IF-BD Tear off the tape from the RC Tear off the AL tape from the SHD Take off led wire from BD Tear off the tape from the panel Take off LVDS wire from panel Disassemble SHD from panel Tear off the tapes from the panel Pull out led wire from panel...
-
Page 16: Power Board
Locate the part number location on the board. Power BD PN IMPORTANT: Repairing must operate by professional repairers in HP repair center, not applicable • for end user • The primary side is the high voltage area, please take care when repair (Front and Back... - Page 17 Power board Repair Condition: Capacitor repair is only for the monitor that has been out of warranty period. IMPORTANT: • Repairing must operate by professional repairers (Note) in repair center, not applicable for end user • The primary side is the high voltage area, please take care when repair (Front and Back view) •...
- Page 18 Repair Process: When EL capacitors damage or explode, it may lose function and cause product no work. The C701 locations are identified below: C701 1) You must disconnect the power cord from the power source before opening the monitor to prevent component damage.
- Page 19 3) Lift capacitors from the PCB. Power Board 4) Place new component on the location, and must check polarity match PCB print. After repaired, please double check whether polarity match PCB print, solder empty and unnecessary solder after soldering must remove.
-
Page 20: Connector Repair
Connector repair The connectors are on the main board (board part number 5E.5M501.00x). The connectors identifiers are as follows: Connector Location HDMI Main Board Before repairing connectors, follow these steps: ▲ Prepare the monitor for disassembly. See Preparation for disassembly on page 9. -
Page 21: Hdmi Connector J3
HDMI connector J3 Repair the HDMI connector: 1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin. 2) Use a hot air gun to melt the solder on the pins. 3) Lift the J3 connector from the circuit board. 4) Place the new component on the circuit board. -
Page 22: Stick Gasket On The Shielding For Hdmi
Stick Gasket on the Shielding for HDMI 1) Use scissors to cut the length of gasket 3020812 in 15mm. Gasket Size: W 8mmx x H 12mm x L 15mm (The Length of gasket should not be less than 15mm) 2) Remove the tape on the gasket and align the gasket to the right side of the HDMI. (Alignment refers to the yellow arrow in the image below) 3) Press the gasket to the end of shielding with your fingers and confirm that it will not fall. -
Page 23: Function Test
Function test After repair, be sure to confirm that all functions are working. Table 4-1: Function test Test item Operating description Tool used HDMI test Confirm whether image displays and sound Computer or DVD player plays correctly on the monitor. -
Page 24: Support And Troubleshooting
Support and troubleshooting The following table lists possible problems, the possible cause or each problem, and the recommended solutions. Table 4-2: Solving common problems Problem Possible cause Solution Screen is blank or Power cord is disconnected. Connect the power cord. video is flashing. -
Page 25: Index
Index power board removal .............13 power light location ............4 components precautions ................1 front ................4 preparation for disassembly ..........9 rear ................. 5 connector repair ............. 17 RC removal ..............10 rear components ...............5 features ................3 removal front components ............. 4 power board ..............13 function test ..............