Advertisement
Quick Links
User Manual
English
Before using the product for the first
time, please read carefully through
the Safety Instructions and the User
Manual. The person responsible for
the instrument must ensure that all users understand
these directions and adhere to them.
Contents
Start up
..................................................................... 1
Operation
................................................................. 2
Care and advice on operation
Transport
.................................................................. 8
Technical data SK104
Safety instructions
.............................................. 10
Start up
Inserting / replacing batteries
Pull the battery cover outwards to unlock the battery
compartment. Open the battery compartment cover and
insert the batteries, observing the correct polarity. Then
press the battery compartment cover back down until it
engages.
•
Insert the batteries observing the correct polarity
•
Use alkaline batteries or rechargeable batteries only
Makita SK104
............................ 8
........................................... 9
•
Remove the batteries if the instrument is not to be
used for a long period of time (to prevent corrosion)
1
en
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
Start up
M
TR
Advertisement
Related Manuals for Makita SK104Z
Summary of Contents for Makita SK104Z
- Page 1 Open the battery compartment cover and insert the batteries, observing the correct polarity. Then press the battery compartment cover back down until it engages. • Insert the batteries observing the correct polarity • Use alkaline batteries or rechargeable batteries only Makita SK104 Start up...
- Page 2 Pressing the On/Set key 1 activates the following laser functions: SK104 Action not in Lock mode in Lock mode only only horizontal line horizontal line only vertical line only vertical line horizontal and again as 1x vertical line Makita SK104 Operation...
- Page 3 Turn the Lock switch 3 in order to transport or tilt the laser beam in Pulse mode, even over long distances. instrument beyond the self-levelling range. When locked, the pendulum is fixed and the self-levelling (Laser detector refer to accessories) function is deactivated. Transportation and lock Self levelling Makita SK104 Operation...
- Page 4 Applications SK104 Receiver available accessory. Makita SK104 Operation...
- Page 5 How to use the wall mount bracket: Makita SK104 Operation...
- Page 6 A (-> A1). Rotate the instrument by 180° and mark the horizontal laser line or the laser dot in exactly the same way on wall B (-> B1). Makita SK104 Operation...
- Page 7 If the difference does not exceed 3 mm, off the maximum deviation of the laser line from the top of the then the SK104 is within tolerance. plumb line. If the difference does not exceed 2 mm, then the SK104 is within tolerance. Makita SK104 Operation...
- Page 8 Place the Lock switch 3 in the "Unlocked" ( Should your SK104 be outside of the specified toler- position. ance, please contact an authorised dealership of Makita. Checking the upper plumbing point: max. 2 mm Display notices Falling below or exceeding the permissible temperature range: 1.5 m...
- Page 9 Dimensions (H x D x W) 4.25 x 4.6 x 2.83 in Weight without batteries 470 g Weight without batteries 16.6 oz Tripod thread 1/4" Tripod thread 1/4" * depending on lighting conditions * depending on lighting conditions Makita SK104 Technical data SK104...
- Page 10 Internet: www.makita.com (for short Makita): • Projection of horizontal and vertical laser lines and • Makita is responsible for supplying the device, including laser dots the User Manual, in a completely safe condition. • Makita is not responsible for third party accessories.
- Page 11 • To be familiar with local safety regulations relating to thorised personnel. accident prevention. WARNING Using a battery charger not recommended by Makita Hazards in use can destroy the batteries. This can cause fire or explosions. CAUTION: Precautions: Only use chargers recommended by Makita to charge Watch out for erroneous measurements if the the batteries.
- Page 12 • Consult the dealer or an experienced radio/TV tech- nician for help WARNING: Changes or modifications not expressly approved by Makita for compliance could void the user’s authority to operate the equipment. Makita SK104 Safety instructions...
- Page 13 Pulse repetition frequency, PRF 10 kHz, cw Pulse duration 50 µs Beam divergence line 180° × 0.1° It is a Class 2 laser product in accordance with: • IEC60825-1: 2014 "Radiation safety of laser prod- ucts" Makita SK104 Safety instructions...