Table of Contents
Advertisement
B Preparation
Connecting the Projector
Notes
• Make sure all the equipment is powered off when connecting the projector.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.
Connecting a Computer
Connection with a computer is explained for each input signal.
INPUT A
For connecting a computer with an RGB output terminal.
Mini D-sub 15-pin cable (not supplied)
Computer
Note
It is recommended that you set the resolution of your computer to 1920 × 1200 pixels for the
external monitor.
INPUT B/INPUT C
For connecting a computer with an HDMI output terminal.
Computer
RGB output
terminal
Audio output
terminal
Audio cable (Stereo mini plug)
(not supplied)
HDMI cable
(not supplied)
HDMI output
terminal
Connecting the Projector
9
Advertisement
Table of Contents
