Table of Contents
Advertisement
Quick Links
Honeycomb Installation Guide –
Parts
1. Installation brackets (Same bracket used for inside and face fitting)
2. Installation Screw (2 per bracket, Square head)
Bracket positioning
We will supply you with the correct number of installation brackets and they should be
evenly spaced across the head rail
Inside Fit option
Advertisement
Table of Contents
Summary of Contents for B&C Honeycomb
- Page 1 Honeycomb Installation Guide – Inside Fit option Parts 1. Installation brackets (Same bracket used for inside and face fitting) 2. Installation Screw (2 per bracket, Square head) Bracket positioning We will supply you with the correct number of installation brackets and they should be...
- Page 2 Figure 1 Step 1 Inside mounting The brackets should positioned evenly across the window frame as shown in Figure 3 If you want the blind at the front edge of your existing frame position them so that the front of the bracket is 5mm back from the front of the window frame. Screw through the bracket either upwards as shown in Figure 3.
- Page 3 Figure 3 Step 2 Installing the blind Once the brackets have been fitted Lift the blind up and place the front of the bracket under the front lip of the head rail. The brackets are spring loaded, once the front of the bracket is under the front lip of the head rail, straighten the blind and push the front of the blind toward the back of the bracket.
- Page 4 Figure 4 Removing the Blind To remove the blind, simply reverse the procedure, push the front of the blind so the back of the head rail disengages from the rear lug on the bracket. Lower the back of the blind on an angle and left out...
- Page 5 Honeycomb Installation Guide – Face Fit option Parts 1. Installation brackets (Same bracket used for inside and face fitting) 2. Installation Screw (2 per bracket, Square head) Bracket positioning We will supply you with the correct number of installation brackets and they should be...
- Page 6 Step 1 Face mounting The brackets should positioned evenly across the window frame as shown in Figure 3 If you want the blind at the front edge of your existing frame position them so that the front of the bracket is 5mm back from the front of the window frame. Screw through the bracket either upwards as shown in Figure 3.
- Page 7 Step 2 Installing the blind Once the brackets have been fitted Lift the blind up and place the front of the bracket under the front lip of the head rail. The brackets are spring loaded, once the front of the bracket is under the front lip of the head rail, straighten the blind and push the front of the blind toward the back of the bracket.
- Page 8 Figure 4 Removing the Blind To remove the blind, simply reverse the procedure, push the front of the blind so the back of the head rail disengages from the rear lug on the bracket. Lower the back of the blind on an angle and left out...