hit counter script
Sony CDX-GT575UE Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Car Receiver
  5. CDX-GT575UE
  6. Service manual

Sony CDX-GT575UE Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver. 1.0 2012.06
• The tuner and CD sections have no adjustments.
(GT575UP only)
FOR UNITED STATES CUSTOMERS. NOT
APPLICABLE IN CANADA, INCLUDING
IN THE PROVINCE OF QUEBEC.
POUR LES CONSOMMATEURS AUX
ÉTATS-UNIS. NON APPLICABLE AU
CANADA, Y COMPRIS LA PROVINCE DE
QUÉBEC.
(GT575UP only)
AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 17 Watts RMS 4 at
4 Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)
Tuner section (GT575UP)
FM
Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM
Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
9,115 kHz or 9,125 kHz/5 kHz
Sensitivity: 26 μV
9-893-497-01
Sony Corporation
2012F33-1
©
2012.06
Published by Sony Techno Create Corporation
Photo: CDX-GT575UP
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
MW/LW
Tuner section (GT575UI)
Tuning range:
FM
Tuning range: 87.5 – 108.0 MHz
Antenna (aerial) terminal:
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Intermediate frequency:
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Sensitivity: MW: 26 μV, LW: 45 μV
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
CD Player section
Frequency response: 20 – 15,000 Hz
Signal-to-noise ratio: 120 dB
MW/LW
Frequency response: 10 – 20,000 Hz
Tuning range:
Wow and flutter: Below measurable limit
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
USB Player section
Antenna (aerial) terminal:
Interface: USB (Full-speed)
External antenna (aerial) connector
Maximum current: 1 A
Intermediate frequency:
9,124.5 kHz or 9,115.5 kHz/4.5 kHz
Power amplifier section
Sensitivity: MW: 26 μV, LW: 45 μV
Output: Speaker outputs
Speaker impedance: 4 – 8 ohms
Tuner section (GT575UE)
Maximum power output: 52 W × 4 (at 4 ohms)
FM
Tuning range:
FM1/FM2: 87.5 – 108.0 MHz
(at 50 kHz step)
FM3:
65 – 74 MHz
(at 30 kHz step)
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
FM/MW/LW COMPACT DISC PLAYER
CDX-GT575UE/GT575UI/
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
External antenna (aerial) connector
9,124.5 kHz or 9,115.5 kHz/4.5 kHz
FM/AM COMPACT DISC PLAYER
GT575UP
US Model
Canadian Model
CDX-GT575UP
AEP Model
UK Model
CDX-GT575UI
Russian Model
CDX-GT575UE
CDX-GT565UP/GT565UV
MG-101CA-188
DAX-25A
General
Outputs:
Audio outputs terminal (front, rear/sub
switchable)
Power antenna (aerial)/Power amplifier control
terminal (REM OUT)
Inputs:
SiriusXM input terminal (GT575UP only)
Remote controller input terminal
Antenna (aerial) input terminal
AUX input jack (stereo mini jack)
USB port
Power requirements: 12 V DC car battery
(negative ground (earth))
Dimensions: Approx. 178 × 50 × 177 mm
1
× 2 × 7 in) (w/h/d)
(7
/
8
Mounting dimensions: Approx. 182 × 53 × 160 mm
1
1
5
× 2
× 6
(7
/
/
/
in) (w/h/d)
4
8
16
Mass: Approx. 1.2 kg (2 lb 11 oz)
Supplied accessories:
Remote commander: RM-X211 (GT575UP only)
Parts for installation and connections (1 set)
Design and specifications are subject to change
without notice.
CDX-GT575UP
CDX-GT575UE/GT575UI

Advertisement

Table of Contents
loading

Related Manuals for Sony CDX-GT575UE

Summary of Contents for Sony CDX-GT575UE

  • Page 1 Separation: 50 dB at 1 kHz Intermediate frequency: Frequency response: 20 – 15,000 Hz 9,115 kHz or 9,125 kHz/5 kHz FM/AM COMPACT DISC PLAYER Sensitivity: 26 μV CDX-GT575UE/GT575UI FM/MW/LW COMPACT DISC PLAYER 9-893-497-01 Sony Corporation 2012F33-1 © 2012.06 Published by Sony Techno Create Corporation...
  • Page 2 Do not touch the soldering iron on the same conductor of the TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE circuit board (within 3 times). PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON- • Be careful not to apply force on the conductor when soldering NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS...

  • Page 3: Table Of Contents

    CDX-GT575UE/GT575UI/GT575UP SECTION 1 SERVICING NOTES TABLE OF CONTENTS NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT SERVICING NOTES ..........The laser diode in the optical pick-up block may suffer electro- GENERAL static break-down because of the potential difference generated by ..............
  • Page 4 Destination OP5 OP4 OP3 OP2 OP1 OP0 SHUF CDX-GT575UP US, Canadian CDX-GT575UI AEP, UK CDX-GT575UE Russian 3. Input the alphanumeric character of 12 digits of “F XXXXXX” displayed on the liquid crystal display, and execute the destina- tion setting. 2. Confi rmation After Destination Setting Note: Refer to following “1-3.
  • Page 5 CDX-GT575UE/GT575UI/GT575UP EXTENSION CABLE AND SERVICE POSITION When repairing or servicing this set, connect the jig cable (exten- sion cable (CD mecha)) as shown below. • Connect the MAIN board (CN700) and the SERVO board (CN401) with the jig cable. Jig cable: Part No.

  • Page 6: General

    CDX-GT575UE/GT575UI/GT575UP SECTION 2 This section is extracted GENERAL from instruction manual. (CDX-GT575UP) Equipment used in illustrations (not supplied) Appareils utilisés dans les illustrations (non fournis) Front speaker Subwoofer Power amplifier Rear speaker Haut-parleur avant Caisson de graves Amplificateur de puissance Haut-parleur arrière...
  • Page 7 Precautions Unité: mm (po) You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. Choose the installation location carefully so that the unit 182 (7 will not interfere with normal driving operations.
  • Page 8 CDX-GT575UE/GT575UI/GT575UP (CDX-GT575UI) Depending on the type of car, use an adaptor (not Abhängig vom Autotyp müssen Sie einen Adapter Selon le type de voiture, utilisez un adaptateur (non In base al tipo di automobile, utilizzare un adattatore Afhankelijk van het soort wagen gebruikt u een supplied) if the antenna connector does not fit.
  • Page 9 été mis hors tension dat geval de Sony-dealer bij u in de buurt. Gebruik voor het veilig en stevig monteren van het afin d’ é viter que la batterie ne se décharge.
  • Page 10 CDX-GT575UE/GT575UI/GT575UP (CDX-GT575UE) Оборудование, фигурирующее в иллюстрациях (не входит в комплект) Обладнання, зображене на малюнках (не надається в комплекті) Задний громкоговоритель Передний громкоговоритель Сабвуфер Усилитель мощности Задній динамік Передній динамік Низькочастотний динамік Підсилювач потужності Громкоговоритель, задний, правый Динамік: задній, правий Фиолетовый...
  • Page 11 замены предохранитель снова перегорел, это может фикcaтоpы нaxодятcя в пpямом положeнии или выгнyты означать неисправность устройства. В этом случае наружу, аппарат не удастся надежно установить, и он может обратитесь к ближайшему дилеру Sony. выпасть ( -1). Пpи нeобxодимоcти отогнитe эти выcтyпы нapyжy, чтобы...

  • Page 12: Disassembly

    CDX-GT575UE/GT575UI/GT575UP SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW FRONT PANEL SECTION Note: Illustration of disassembly is omitted. 3-2. MINI FUSE (BLADE TYPE) (10A/32V) (FU1), COVER (Page 12) 3-3. SUB PANEL BLOCK (Page 13) 3-4.

  • Page 13: Sub Panel Block

    CDX-GT575UE/GT575UI/GT575UP 3-3. SUB PANEL BLOCK 2 two claws 2 two claws 1 two screws (PTT2.6 3 sub panel block 3-4. CD MECHANISM DECK (MG-101CA-188) 6 CD mechanism deck (MG-101CA-188) 4 two screws (PTT2.6 5 bracket (CD) 1 screw (PTT2.6 2 Lift up the CD mechanism deck (MG-101CA-188).

  • Page 14: Main Board

    CDX-GT575UE/GT575UI/GT575UP 3-5. MAIN BOARD Note: When the complete MAIN board is replaced, the destination setting is necessary. Refer to “NOTE THE MAIN BOARD OR SYSTEM CONTROLLER (IC501) REPLACING” on page 4. 2 screw (PTT2.6 1 three ground point screws (PTT2.6 2 screw (PTT2.6...

  • Page 15: Chassis (T) Sub Assy

    CDX-GT575UE/GT575UI/GT575UP 3-7. CHASSIS (T) SUB ASSY 1 two screws (M1.7 2.5) 1 two screws (M1.7 2.5) 3 chassis (T) sub assy 2 claw 3-8. ROLLER ARM ASSY 5 roller arm assy 4 gear (HRA) 1 spring (RAL) 3 washer 2 spring (RAR)

  • Page 16: Chassis (Op) Assy

    CDX-GT575UE/GT575UI/GT575UP 3-9. CHASSIS (OP) ASSY 8 chassis (OP) assy 1 tension spring (KF) 6 two coil springs (damper) (natural) 7 coil spring (damper) (blue) 4 slider (R) 3 lever (D) 2 gear (LE1) 3-10. CHUCKING ARM SUB ASSY 3 chucking arm sub assy 1 spring Note 1: Have this portion receive the chassis.

  • Page 17: Sled Motor Assy

    CDX-GT575UE/GT575UI/GT575UP 3-11. SLED MOTOR ASSY 2 three serration screws 3 sled motor assy 1 spring turn table spring stand Note 2: Never remove these parts since they were adjusted. bearing (F) – – stand Note 1: Place the stand with care not to touch the turn table.

  • Page 18: Optical Pick-Up Section

    CDX-GT575UE/GT575UI/GT575UP 3-12. OPTICAL PICK-UP SECTION 2 optical pick-up section Note: Be careful not to touch the lens and hologram terminal when removing the optical pick-up section. – bottom side view – 3-13. OPTICAL PICK-UP 1 tapping screw (P 1.4) 2 leaf spring (OPS)

  • Page 19: Diagrams

    CDX-GT575UE/GT575UI/GT575UP SECTION 4 DIAGRAMS 4-1. BLOCK DIAGRAM - SERVO Section - CD MECHANISM DECK BLOCK (MG-101CA-188) FL, RL, SUB (Page 20) FPI1 DAO3 (F_L-CH) FPI2 DAO2 (F_R-CH) R-CH FNI1 FNI2 DAO4 (R_L-CH) DAO1 (R_R-CH) R-CH CD HEAD AMP, DAO5 (SUB-CH)

  • Page 20: Block Diagram - Main Section

    CDX-GT575UE/GT575UI/GT575UP 4-2. BLOCK DIAGRAM - MAIN Section - ELECTRICAL VOLUME, INPUT SELECTOR IC401 J402 FL, RL, SUB (Page 19) 33 AU_IN_FL AU_OUT_FL 36 FRONT AUDIO OUT 31 AU_IN_RL R-CH 30 AU_IN_SUB AU_OUT_SL 40 REAR/SUB J901 AUDIO OUT R-CH AU_OUT_RL 38...

  • Page 21: Block Diagram - Panel, Power Supply Section

    CDX-GT575UE/GT575UI/GT575UP 4-3. BLOCK DIAGRAM - PANEL, POWER SUPPLY Section - MAIN SYSTEM CONTROLLER IC501 (3/3) XOUT X502 32.768kHz OSCOUT +1.5V IC701 VDD +1.5V X501 REGULATOR IC681 7.92MHz OSCIN DSP_1_5V 65 CN901 CN102 +1.5V IC701 VDDM +1.5V REGULATOR NOSE_SW IC682 +3.3V REGULATOR BU +3.3V...
  • Page 22 CDX-GT575UE/GT575UI/GT575UP THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. • Waveforms (In addition to this, the necessary note is printed in each block.) – MAIN Board – For Printed Wiring Boards. For Schematic Diagrams. IC1300 1 (BST)

  • Page 23: Schematic Diagram - Main Section (1/5)

    CDX-GT575UE/GT575UI/GT575UP 4-4. SCHEMATIC DIAGRAM - MAIN Section (1/5) - • See page 32 for IC Block Diagrams. MAIN BOARD (1/5) IC301 IC B/D (GT575UP) POWER AMP, REGULATOR CN301 IC301 REAR RCH (+) TDF8556AJ/N5 REAR LCH (+) C367 REAR RCH (–) C366 REAR LCH (–)

  • Page 24: Schematic Diagram - Main Section (2/5)

    CDX-GT575UE/GT575UI/GT575UP 4-5. SCHEMATIC DIAGRAM - MAIN Section (2/5) - • See page 32 for IC Block Diagrams. MAIN BOARD (2/5) Q407 13.8 LTA014EUBFS8TL 13.8 Q407, 409 MUTING CONTROL R406 R470 MAIN BOARD (1/5) (Page 23) R468 13.8 R471 Q409 LTC014EUBFS8TL...

  • Page 25: Schematic Diagram - Main Section (3/5)

    CDX-GT575UE/GT575UI/GT575UP 4-6. SCHEMATIC DIAGRAM - MAIN Section (3/5) - • See page 22 for Waveforms. • See page 32 for IC Block Diagrams. • See page 34 for IC Pin Function Description. MAIN BOARD (3/5) MAIN BOARD (1/5) BU_IN (Page 23)

  • Page 26: Schematic Diagram - Main Section (4/5)

    CDX-GT575UE/GT575UI/GT575UP 4-7. SCHEMATIC DIAGRAM - MAIN Section (4/5) - • See page 22 for Waveforms. • See page 32 for IC Block Diagrams. • See page 34 for IC Pin Function Description. MAIN BOARD (4/5) JL730 C787 C779 C776 C789 0.01...

  • Page 27: Schematic Diagram - Main Section (5/5)

    CDX-GT575UE/GT575UI/GT575UP 4-8. SCHEMATIC DIAGRAM - MAIN Section (5/5) - • See page 22 for Waveforms. • See page 32 for IC Block Diagrams. • See page 34 for IC Pin Function Description. MAIN BOARD (5/5) JL611 JL612 JL609 JL608 JL613...

  • Page 28: Printed Wiring Board - Main Section (1/2)

    CDX-GT575UE/GT575UI/GT575UP 4-9. PRINTED WIRING BOARD - MAIN Section (1/2) - • : Uses unleaded solder. MAIN BOARD (COMPONENT SIDE) (GT575UP) C876 R857 R855 C830 IC830 C457 C878 R308 C877 IC831 (GT575UI) R873 C357 R831 D306 R874 C314 FB306 R837 R406...

  • Page 29: Printed Wiring Boards - Main Section (2/2)

    CDX-GT575UE/GT575UI/GT575UP 4-10. PRINTED WIRING BOARDS - MAIN Section (2/2) - • : Uses unleaded solder. CN301 (GT575UP) J402 (FRONT VIEW) (GT575UP) REAR/SUB FRONT J801 AUDIO OUT AUDIO OUT REMOTE REAR LCH (+) REAR RCH (+) GRN/BLK REAR LCH (–) VIO/BLK...

  • Page 30: Printed Wiring Board - Key Board

    CDX-GT575UE/GT575UI/GT575UP 4-11. PRINTED WIRING BOARD - KEY Board - • : Uses unleaded solder. KEY BOARD (COMPONENT SIDE) S953 S951 SEEK + > M S957 S952 LED902 SOURCE LCD901 LED900 S954 LIQUID CRYSTAL DISPLAY PANEL (LCD BACK LIGHT) MODE S956...

  • Page 31: Schematic Diagram - Key Board

    CDX-GT575UE/GT575UI/GT575UP 4-12. SCHEMATIC DIAGRAM - KEY Board - • See page 32 for IC Block Diagrams. KEY BOARD IC902 R980 REMOTE CONTROL RECEIVER IC902 PNJ4813M01S0 R900 R903 R905 R907 R909 R910 R911 R914 R916 R975 R976 R986 D981 D982 R981...
  • Page 32 CDX-GT575UE/GT575UI/GT575UP • IC Block Diagrams IC401 BD3467FV-E2 FADER FADER – MAIN Board – BOOST OUTC IC301 TDF8556AJ/N5 FADER FADER A1 1 BOOST OUTS A2 2 I2C_SIO OUT-FL– C BUS FADER FADER B1 3 OUTR1 BOOST I2C_SCK B2 4 OUT-FL+ FADER...
  • Page 33 CDX-GT575UE/GT575UI/GT575UP IC1300 OZ539IGN-A1-0-TR BST 1 VREF OSCILLATOR LX 2 REFERENCE GENERATOR OVER CURRENT PROTECTION GNDA VIN 3 EN_SYS 4 USBOUT 5 FB_USB 6 SS_SYS ADJUSTMENT GENERATOR CHARGE EN_USB PUMP VIC_USB USBIN OVER-CURRENT ISET_USB LIMIT VOUT_SYS (USBIN) UVLS FAULT PROTECTION –...
  • Page 34 CDX-GT575UE/GT575UI/GT575UP • IC Pin Function Description MAIN BOARD IC501 R5F3650ECDZ99FB (MAIN SYSTEM CONTROLLER) (GT575UE/GT575UI) IC501 R5F3650KCDZ96FB (MAIN SYSTEM CONTROLLER) (GT575UP) Pin No. Pin Name Description NOSE_SW Front panel remove/attach detection signal input terminal “L”: Front panel is attached SIRCS Remote control signal input from the remote control signal receiver...
  • Page 35 CDX-GT575UE/GT575UI/GT575UP Pin No. Pin Name Description GHOST_1_5V Not used Ground terminal DSP_RST Reset signal output to the audio DSP “L”: reset DSP_SSTBY SRAM standby mode control signal output to the audio DSP DSP_1_5V Power supply on/off control signal output terminal for the audio DSP...
  • Page 36 CDX-GT575UE/GT575UI/GT575UP MAIN BOARD IC601 TMPM320C1DFG-9999 (SUB SYSTEM CONTROLLER) Pin No. Pin Name Description MODE1 Operation mode setting terminal Fixed at “L” in this unit RESETn Reset signal input terminal from the main system controller DRV_ON Driver control signal output to the CD section...
  • Page 37 CDX-GT575UE/GT575UI/GT575UP Pin No. Pin Name Description I2C_SDA Two-way data bus with the EEPROM DVCC1.2 Power supply terminal (+1.2V) 63 to 68 D0 to D5 Two-way data bus terminal Not used DVSSCOM Ground terminal Two-way data bus terminal Not used DVCC3.3IO Power supply terminal (+3.3V)
  • Page 38 CDX-GT575UE/GT575UI/GT575UP MAIN BOARD IC701 TC94A99FG-003 (SY, H (CD HEAD AMP, DIGITAL SERVO PROCESSOR, AUDIO DSP) Pin No. Pin Name Description LPFO Signal output from the operation amplifi er for PLL loop fi lter PVREF Reference voltage (+1.65V) input terminal VCOF Terminal for VCO fi...
  • Page 39 CDX-GT575UE/GT575UI/GT575UP Pin No. Pin Name Description ADVDD3 Power supply terminal (+3.3V) ADIN1 (IN_L-CH) Audio signal input terminal (L channel) ADVREFL Reference voltage output terminal ADVCM Reference voltage output terminal ADVREFH Reference voltage output terminal ADIN2 (IN_R-CH) Audio signal input terminal (R channel)

  • Page 40: Exploded Views

    CDX-GT575UE/GT575UI/GT575UP SECTION 5 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • The mechanical parts with no reference The components identifi ed by mark 0 they may have some difference from the number in the exploded views are not sup- or dotted line with mark 0 are critical for original one.

  • Page 41: Front Panel Section

    CDX-GT575UE/GT575UI/GT575UP 5-2. FRONT PANEL SECTION (GT575UP) (GT575UE/GT575UI) not supplied (for FRONT PANEL) not supplied (KEY board) RE901 IC902 CCB1 not supplied LCD901 J901 not supplied CN971 not supplied (GT575UP) (GT575UE/GT575UI) not supplied Note: Refer to the servicing notes “NOTE FOR REPLACEMENT OF THE USB CONNECTOR (CN971) AND THE AUX JACK (J901)”...

  • Page 42: Cd Mechanism Deck Section (Mg-101Ca-188)

    CDX-GT575UE/GT575UI/GT575UP 5-3. CD MECHANISM DECK SECTION (MG-101CA-188) CDM1 DAX1 not supplied supplied not supplied not supplied not supplied not supplied not supplied SENSOR board not supplied not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref.

  • Page 43: Electrical Parts List

    CDX-GT575UE/GT575UI/GT575UP SECTION 6 ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in • CAPACITORS When indicating parts by reference num- the parts list may be different from the uF: μF ber, please include the board name. parts specifi ed in the diagrams or the com- •...
  • Page 44 CDX-GT575UE/GT575UI/GT575UP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R937 1-216-810-11 METAL CHIP 1/10W A-1884-661-A MAIN BOARD, COMPLETE (GT575UP) R938 1-216-809-11 METAL CHIP 1/10W A-1884-662-A MAIN BOARD, COMPLETE (GT575UE) R939 1-216-809-11 METAL CHIP 1/10W A-1884-663-A...
  • Page 45 CDX-GT575UE/GT575UI/GT575UP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C402 1-112-717-91 CERAMIC CHIP 1uF 6.3V C621 1-125-777-11 CERAMIC CHIP 0.1uF C403 1-100-354-21 ELECT CHIP 220uF 6.3V C622 1-125-777-11 CERAMIC CHIP 0.1uF C407 1-100-597-91 CERAMIC CHIP 0.1uF...
  • Page 46 CDX-GT575UE/GT575UI/GT575UP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C759 1-100-567-81 CERAMIC CHIP 0.01uF < DIODE > C760 1-100-597-91 CERAMIC CHIP 0.1uF C761 1-100-597-91 CERAMIC CHIP 0.1uF D114 6-503-205-01 DIODE RKZ6.8B2KGP1 C767 1-125-777-11 CERAMIC CHIP 0.1uF...
  • Page 47 CDX-GT575UE/GT575UI/GT575UP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC501 6-719-019-01 IC R5F3650ECDZ99FB (for SERVICE) R307 1-218-943-11 METAL CHIP 1/16W (GT575UE/GT575UI) R308 1-216-864-11 SHORT CHIP IC501 6-719-022-01 IC R5F3650KCDZ96FB (for SERVICE) R309 1-218-973-11 METAL CHIP...
  • Page 48 CDX-GT575UE/GT575UI/GT575UP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R493 1-216-821-11 METAL CHIP 1/10W R595 1-216-809-11 METAL CHIP 1/10W R494 1-216-821-11 METAL CHIP 1/10W R601 1-218-959-11 METAL CHIP 3.3K 1/16W R495 1-216-821-11 METAL CHIP 1/10W...
  • Page 49 CDX-GT575UE/GT575UI/GT575UP MAIN SENSOR SERVO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R749 1-218-990-81 SHORT CHIP X701 1-795-561-21 VIBRATOR, CERAMIC (16.934 MHz) R750 1-218-969-11 METAL CHIP 1/16W ************************************************************* R751 1-218-969-11 METAL CHIP 1/16W R763 1-216-864-11 SHORT CHIP...
  • Page 50 CDX-GT575UE/GT575UI/GT575UP Ref. No. Part No. Description Remark PARTS FOR INSTALLATION AND CONNECTIONS ************************************** X-2583-962-1 FRAME ASSY, FITTING 4-276-003-01 KEY (FRAME) (1 piece) 1-846-033-11 CONNECTION CABLE (ISO) (POWER) (GT575UE/GT575UI) 1-846-037-11 CONNECTION CABLE, AUTOMOBILE (POWER) (GT575UP) 4-278-065-01 COLLAR 3-934-325-01 SCREW, +K (5X8) TAPPING (1 piece) (GT575UP)
  • Page 51 CDX-GT575UE/GT575UI/GT575UP MEMO...
  • Page 52 CDX-GT575UE/GT575UI/GT575UP REVISION HISTORY Checking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2012.06...

This manual is also suitable for:

Cdx-gt575uiCdx-gt575up

Table of Contents