Page 1
Owner’s Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. Serial No.
Page 2
Welcome ! antenna, it will extend automatically while the unit is operating. Thank you for purchasing the Sony Compact •Do not use the Custom file feature while Disc Player. This unit lets you enjoy a variety driving, or perform any other function which of features using the following controller could divert your attention from the road.
Page 3
R disc to be played on the audio CD player). • You cannot play CD-RWs (rewritable CDs) on this player. When you play 8 cm (3 in.) CDs Use the optional Sony compact disc single adaptor (CSA-8) to protect the CD player from damage. Downloaded from:...
Table of Cont ent s Location of controls ..........5 Ot her Funct ions Labeling the rotary commander ...... 18 Get t ing St art ed Using the rotary commander ......19 Resetting the unit ..........7 Adjusting the sound characteristics ....20 Detaching the front panel ........
-SEEK/AMS SOUND ENTER SHUF MODE CDX-C7000X/C5000X/C5005 Refer to the pages listed for details. 1 Volume control dial qg Frequency select sw itch (located on the bottom of the unit) * 2 M ENU button 8, 10, 12, 13, 14, 15, 16,...
Page 6
Locat ion of cont rols Card remot e commander RM -X91* * Supplied only f or t he CDX-C7000X. The corresponding but t ons of t he card rem ot e com m ander cont rol t he sam e f unct ions as t hose on t his unit .
At t aching t he f ront panel Place the hole A in the front panel onto the Get t ing St art ed spindle B on the unit as illustrated, then push the left side in. Reset t ing t he unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit.
Turning t he unit on/off Set t ing t he clock The clock uses a 12-hour digital indication. Turning on t he unit Press (SOURCE) or insert a CD in the unit. For Example: To set the clock to 10:08 details on operation, refer to page 9 (CD/MD) and page 15 (radio).
When t he last t rack on t he CD is over CD Player The track number indication returns to “1,” CD/M D Unit (opt ional) and playback restarts from the first track of the Press In addition to playing a CD with this unit alone, you can also control external CD/MD (OFF) Stop playback...
Page 10
After you select the desired item, the display Locat ing a specif ic t rack will automatically change to the Motion — Automatic M usic Sensor (AM S) Display mode after a few seconds. In the Motion Display mode, all the items are During playback, press either side of scrolled in the display one by one in order.
Locat ing a disc Playing t racks in random — Disc Selection order — Shuffle Play When an optional CD/ M D unit is connected, press either side of You can select: (DISC/PRST) to select the desired disc. The desired disc in the current optional •...
To return to normal CD play mode, press Labeling a CD — Disc M emo (ENTER) . (For a CD unit w ith the custom file function) Tips • To erase or correct a name, ent er “ _” (under-bar) You can label each disc with a personalized f or each charact er.
Erasing t he disc m em o Locat ing a disc by nam e Press (SOURCE) repeatedly to select — List-up (For a CD unit w ith the custom “CD.” file function or an M D unit) Press (MODE) repeatedly to select the CD You can use this function for discs that have unit.
Playing specif ic t racks only Select ing specific t racks You can select: •“BANK-ON” — to play the tracks with the for playback “PLAY” setting. — Bank •“BANK-INV” (Inverse) — to play the tracks with the “SKIP” setting. (For a CD unit w ith the custom file function) If you label the disc, you can set the unit to During playback, press (MENU) , then skip or play the tracks of your choice.
M em orizing only t he Radio desired st at ions You can preset up to 18 FM stations (6 each for FM1, FM2, and FM3), up to 12 AM stations (6 each for AM1 and AM2) in the order of your M em orizing st at ions choice.
If FM st ereo recept ion is poor Receiving t he m em orized — M onaural M ode st at ions During radio reception, press (MENU) , then press either side of (DISC/PRST) repeatedly until “M ONO-OFF” appears. Press (SOURCE) repeatedly to select the tuner.
Tips St oring t he st at ion nam es • To erase or correct a name, ent er “ _” (under-bar) f or each charact er. • There is anot her w ay t o st art st oring st at ion —...
Locat ing a st at ion by Ot her Funct ions nam e — List-up Press (LIST) momentarily. You can also control the unit with a rotary The name assigned to the station currently commander. tuned appears in the display. Labeling t he rot ary com m ander Press either side of (DISC/PRST)
By rot at ing t he cont rol Using t he rot ary (t he SEEK/AM S cont rol) com m ander The rotary commander works by pressing buttons and/or rotating controls. You can also control an optional CD/MD unit with the rotary commander.
Ot her operat ions You can also change t he operat ive direct ion of Rotate the VOL control to t hese cont rols w it h t he unit (see “ Changing t he adjust the volume. sound and display set t ings” on page 21). Press (ATT) to attenuate the sound.
D.BASS-3 D.BASS-2 CDX-C5005 only D.BASS-3 D.BASS-1 CDX-C7000X only D.BASS-2 D.BASS-1 Note If you connect an opt ional pow er amplif ier and do not use t he built -in amplif ier, t he beep sound w ill Frequency (Hz) be disabled.
M em orizing TV channels TV/Video (opt ional) aut om at ically The unit selects the TV channels with the You can connect an optional TV tuner and TV strongest signals and memorizes them in the monitor to this unit. order of their frequency.
St oring t he TV channel Displaying t he nam es inform at ion st ored on discs Follow the steps in “Storing the station names” (page 17). Press during CD/ M D playback. (LIST) Displaying t he TV or radio st at ion Example: When CD unit 1 is select ed.
If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Press (SOURCE) repeatedly to select CD or M D. Fuse (10 A) Press the (+) side of (SEEK/AMS) .
Cleaning t he connect ors Dism ount ing t he unit The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, Press the clip inside the front cover w ith open the front panel by pressing (OPEN), then a thin screw driver, and gently pry the detach it and clean the connectors with a...
Troubleshoot ing guide The following checklist will help you remedy the problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General Cause/Solut ion Problem •Cancel the ATT function. No sound. •Set the fader control to the center position for two-speaker system.
Page 28
When an error occurs during playback of an MD or CD, the disc number of the MD or CD does not appear in the display. The disc number of the disc causing the error appears in the display. If the above-mentioned solutions do not help improve the situation, consult your nearest Sony dealer. Sony Corporation...
Page 29
This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...