3.6.7
APM
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled (S4+S5) ] [Enabled (S5)]
3-32
The system goes into ON state after an AC power loss.
The system goes into OFF state after an AC power loss.
The system goes into either OFF or ON state, whatever the system state
was before the AC power loss.
Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel
/Realtek LAN device or other installed PCIE LAN devices.
®
Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the
PCIE LAN devices.
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
Chapter 3: BIOS setup