Related Manuals for Toro 39909
Summary of Contents for Toro 39909
- Page 1 Form No. 3460-965 Rev A 60V Cordless Power Shovel ™ Model No. 39909—Serial No. 323000000 and Up Model No. 39909T—Serial No. 323000000 and Up *3460-965* Register at www.Toro.com. Original Instructions (EN)
- Page 2 Whenever you need service, genuine Toro parts, or For assistance, please see additional information, contact an Authorized Service www.Toro.com/support Dealer or Toro Customer Service and have the model for instructional videos and serial numbers of your product ready. Figure 1...
-
Page 3: Table Of Contents
Safety-Alert Symbol Contents The safety-alert symbol (Figure 1) shown in this Safety-Alert Symbol..........3 manual and on the machine identifies important safety Safety ............... 4 messages that you must follow to prevent accidents................4 Safety and Instructional Decals ......6 Setup ................ -
Page 4: Safety
Charge the battery pack with only the battery charger specified by Toro. A charger suitable for Read All Instructions 1 type of battery pack may create a risk of fire when used with another battery pack. - Page 5 Do not disassemble the battery pack. • Replace the battery pack with a genuine Toro battery pack only; using another type of battery pack may cause a fire or risk of injury. • Keep battery packs out of the reach of children and in the original packaging until you are ready to use them.
-
Page 6: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. Model 39909 decal140-8464 140-8464 1. Cutting/dismemberment 3. Read the Operator's hazard of foot;... - Page 7 decal137-9462 137-9462 decal137-9454 137-9454 1. Read the Operator’s 3. Keep away from open fire Manual. or flames. 2. Call2Recycle ® battery 4. Do not expose to rain. recycling program decal137-9461 137-9461 1. Battery charge status...
-
Page 8: Setup
Setup Important: The battery pack is not fully charged when it is purchased. Before using the machine for the first time, refer to Charging the Battery Pack (page 13). Mounting the Battery Charger (Optional) If desired, mount the battery charger securely on a wall using the wall-mount key holes on the back of the charger. -
Page 9: Unfolding The Handle
Unfolding the Handle Unfold the handle (A of Figure Align the locking button on the lower shaft with the slotted hole on the upper shaft and slide the 2 shafts together (B and C of Figure Note: The locking button clicks into the slotted hole when the shafts are secured (D of Figure Using the provided Allen wrench, tighten the screw on the shaft connector until it is secure (E of Figure... -
Page 10: Installing The Auxiliary Handle
Installing the Auxiliary Handle Separate the auxiliary handle from the handle plate by removing the 4 socket head screws using the provided Allen wrench (A of Figure Line up the auxiliary handle with auxiliary handle plate on the shaft (B of Figure Secure the auxiliary handle to the handle plate with the 4 socket head screws previously removed (C of Figure... -
Page 11: Product Overview
Contact your Authorized Service Dealer or authorized Toro distributor or go to www.Toro.com for a list of all approved attachments and accessories. To ensure optimum performance and continued safety... -
Page 12: Operation
Operation Note: If the battery-compartment lid does not close completely, the battery is not fully installed. To start the machine, squeeze the lockout Starting the Machine trigger, then squeeze the run trigger (Figure 10). Note: Important: Use the battery pack only in Slide the 2-speed switch to change the speed of the rotor. -
Page 13: Charging The Battery Pack
Charging the Battery Pack Refer to the following table to interpret the LED indicator light on the battery charger. Important: The battery pack is not fully charged Indicator Indicates when you purchase it. Before using the tool for light the first time, place the battery pack in the charger No battery pack inserted and charge it until the LED display indicates the battery pack is fully charged. -
Page 14: Maintenance
If you are located outside of the US Remove the 4 screws securing the scraper blade and and Canada, please contact your authorized replace the scraper blade as necessary. Toro distributor. Service Should the machine need service, take it to your Authorized Service Dealer. -
Page 15: Storage
Storage Important: Store the machine, battery pack, and charger only in temperatures that are within the appropriate range; refer to Specifications (page 11). Important: If you are storing the battery pack for the off-season, charge it until 2 or 3 LED indicators turn green on the battery. -
Page 16: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The machine does not run or does not run 1. - Page 17 Notes:...
- Page 18 Notes:...
- Page 19 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.