Related Manuals for Huawei FTK01
Summary of Contents for Huawei FTK01
- Page 1 FTK01 & FMC2105-SU FTTR Fiber Termination Kit & Field Mountable Connector Quick Installation Guide Issue Date 2023-05-22 HUAWEI TECHNOLOGIES CO., LTD.
- Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
-
Page 3: Preface
Huawei is not liable for any consequence that results from customers' violation of universal operation requirements or equipment design, manufacturing, and usage safety standards. - Page 4 When working at heights, take proper measures to prevent objects from falling down. Change History Issue Date Description 2022-05-22 Updated the product introduction and optimized the installation procedure. 2022-12-30 This issue is the first official release. Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd.
-
Page 5: Table Of Contents
3.3 2 mm x 3 mm Terminal Flexible Optical Cable ......................10 4 Processing the Optical Fiber ..................... 11 5 Installing the Optical Fiber Connector ................... 15 6 Disassembling Optical Fiber Connector (Optional) ............18 Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. -
Page 6: Product Overview
The one-time assembly success rate of skilled technicians is greater than or equal to 95%. Optical fibers can be terminated on site within three minutes. The FTK01 contains complete tools and is easy to carry. It needs to be used with an FMC2105-SU connector to implement precise fixed-length assembly. Unique design ... -
Page 7: Installation Preparation
2 PCS 2 mm x 3 mm optical cable stripper 1 PCS 2 mm x 1.6 mm optical cable stripper 1 PCS Coating stripper 2 PCS Optical fiber cutter 1 PCS Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. - Page 8 Quick Installation Guide 2 Installation Preparation The FTK01 contains tools 5, 6, and 7. Tools 1 (diagonal pliers) and 4 (2 mm x 3 mm optical cable stripper) are available in the open market and need to be prepared by the customer.
-
Page 9: Fmc2105-5U Structure
FTTR Fiber Termination Kit & Field Mountable Connector Quick Installation Guide 2 Installation Preparation 2.2 FMC2105-5U Structure The FMC2105-SU is not included in the FTK01, and needs to be purchased separately and used together with the FTK01. Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. -
Page 10: Installation Process
FTK01 & FMC2105-SU FTTR Fiber Termination Kit & Field Mountable Connector Quick Installation Guide 2 Installation Preparation 2.3 Installation Process Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. -
Page 11: Stripping The Optical Cable
Step 2 Use diagonal pliers to cut the optical cable from the middle, remove the sheath, and expose the bare fiber by 45–50 mm. Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. - Page 12 Do not use the 2 mm x 1.6 mm optical cable stripper in the FTK01 to strip the sheath. 2. If no bare fiber is exposed after the sheath is removed, bend the sheath at the initial stripping point by about 180 degrees until the optical fiber is broken and the bare fiber is exposed, as shown in the following figure.
-
Page 13: Mm X 1.6 Mm Transparent Optical Cable Or Terminal Flexible Optical Cable
Step 2 Use the optical cable stripper in the toolkit to strip the sheath of the optical cable and expose the bare fiber by 45–50 mm. Transparent optical cable Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. - Page 14 Therefore, when using the 2 mm x 1.6 mm optical cable strippers to strip the cable, you can apply a little more force or strip the cable in two sections. Terminal flexible optical cable ----End Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd.
-
Page 15: Mm X 3 Mm Terminal Flexible Optical Cable
Step 2 Use a 2 mm x 3 mm optical cable stripper to strip the sheath of the optical cable and expose the bare fiber by 45–50 mm. ----End Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. -
Page 16: Processing The Optical Fiber
Clean the tool before stripping the optical fiber. Otherwise, the residual coating may cause incomplete stripping of the optical fiber. Do not leave a gap between the optical cable and the stripper. Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. - Page 17 The narrow channel of the optical cable fixing piece is applicable to 1.2 mm x 1.6 mm optical cables, and the wide channel is applicable to 2 mm x 1.6 mm and 2 mm x 3 mm optical cables. Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd.
- Page 18 2 mm x 3 mm terminal flexible optical cable, vertically placed Step 6 Unlock the fiber cutter, push out the knife edge through the slider at the bottom of the fiber cutter, and open the case for storing the cut fiber. Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd.
- Page 19 Step 7 Insert the optical cable whose coating is stripped into the slot on the side marked with "Remove fixed length coating". Do not leave a gap between the optical cable and the fixed-length limiting surface. ----End Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd.
-
Page 20: Installing The Optical Fiber Connector
In this case, the bare fiber is slightly bent. Pay attention to the direction of the optical cable when pushing it into the connector. Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. - Page 21 2 mm x 3 mm terminal flexible optical cable (vertically pushed in, the 2 mm side is clamped) Step 3 Push the lock up to OFF to clamp the fiber. Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd.
- Page 22 1 mm. Step 5 Install the SC housing to the main body, as shown in the following figure. ----End Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd.
-
Page 23: Disassembling Optical Fiber Connector (Optional)
Step 1 Remove the SC housing (Connectors must be installed with dustproof caps. Hold the SC housing on both sides and push it out vertically to remove it). Step 2 The lock of the connector body is exposed. Push the lock to the ON position. Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd. - Page 24 FTK01 & FMC2105-SU FTTR Fiber Termination Kit & Field Mountable Connector Quick Installation Guide 6 Disassembling Optical Fiber Connector (Optional) Step 3 Unscrew the boot. Step 4 Remove the cable. ----End Issue 02 (2023-05-22) Copyright © Huawei Technologies Co., Ltd.