Advertisement
Lift receiver or press key to answer call hands free.
Press the key underneath "DIR" in the display, select the type of search MY (for personal Speed Dials), INT (for all internal extensions) or EXT (for all external system Speed Dials) then type the name using the dial pad e.g press the 5 key 3 times to get the L (you can type in part or all of the name you are looking for). Press the key under "FIND" to search for name, press "CALL" to ring or "NEXT" to search through other names. If you want to exit at any time press "CNCL"
Lift receiver and dial 9 and telephone number or dial number without lifting receiver for a hands free call
Press key once
Press the line key next to the green flashing light
To announce the call:- Press the key, dial the extn number, announce call and hang up To transfer without announcing:-Press TRNS in the display, dial the extn number and hang up
[The company will incur the call cost!]
Whilst on a call, press the key, dial '9' and telephone number, then announce the call and hang up.
If you are announcing the call and there is no response from the extn, press the green flashing line key , or press the RTRN in the display.
Whilst on a call, press key, dial # 407 and mailbox number (extn number), press # and hang up
Press key this will redial the last number you have dialed (Int or ext)
Only available on digital ISDN lines – When you have dialled a busy external number press the key underneath ABR in the display. The system will try the number for you normally once a minute for a maximum of 15 times
(Dependent upon your system settings)
Dial #442
If you dial a busy extension, press the key under ACB in the display. When the extn or line becomes free your phone will ring and display Auto Call back. Lift receiver and the system will call their extn.
Dial # 431
Press key, followed by # 33# to park on your extn. Replace the receiver
Dial #32 followed by the extn number where call was parked to retrieve the call
Lift receiver and dial #30 [Your announcement will come out through the speakers of any free extns]
Whilst on a call, press CONF key in display, dial 3rd party, when they answer, press JOIN to join all 3 together. Process can be repeated to a maximum of 8 in total
Press EXIT in display and then hang up
Press programmed Pick up key or dial #5#34
Dial #5#5 and ringing extn number
Dial one of the following codes followed by the destination number e.g. extn number to receive the calls:
#6011 – Immediate forward
#6021 – Forward on busy
#6031 + Time in seconds 08-60 Forward on No
#6041 – Forward on Busy and No Answer
#6091 – Do Not Disturb ON
#6092 – Do Not Disturb OFF
#6011 + 9 – External Call Forward followed by #
[The company will incur the call cost]
#6051 – Cancel Call Forward
Voicemail Notification Key | ||
Mute Key | ||
Redial Key | ||
Hands free / Loudspeaker Key | ||
Volume Up / Volume Down | ||
Transfer Key | ||
Hold Key | ||
Speed Dial Key |
Dial # 9876, press the key, enter speed dial location 100 – 119, enter 9 + telephone number, press the key. Enter the name of the speed dial using the numeric keypad. If you want to erase a character or create a space, use the LEFT and RIGHT keys in the display. Press the key to store the entry then lift and replace receiver
Use:- Press key and then location 100 – 119 or use the MY directory as detailed in the "dial by name" section
Additional Guides available at http://www.swcomms.co.uk/resourcecentre/user-guides-and-manuals
Service Desk 01392 330033 email: servicedesk@swcomms.co.uk
Customer Service 01392 315315 email: customer.service@swcomms.co.uk
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Toshiba DP5032FS-D, DP5022F-SD - Display Handset Quick Guide
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the DP5032FS-D that isn't answered in the manual? Leave your question here.