Spin Speed Selection..... 27 Table of Contents Auxiliary Function Selection.... 28 6.8.1 Auxiliary Functions...... 28 1 Safety Instructions ......6.8.2 Functions/Programmes Selec- Intended Use ........ ted by Pressing the Function Safety of Children, Vulnerable Per- Keys for 3 Seconds ....sons and Pets ......
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents care- fully before using the product.
1 Safety Instructions This section includes the safety • The product must only be instructions necessary to pre- used for washing and rinsing vent the risk of personal injury or of laundry that are marked ac- material damage. cordingly • This appliance is intended to Our company shall not be held be used in household and responsible for damages that...
ing use of the appliance in a • Cut the power cable and the product safe way and the break and deactivate the lock- hazards involved. ing mechanism of the loading • Children under the age of 3 door before disposing of the should be kept away unless product for children’s safety.
• When unplugging the appli- Installation Safety ance, don't hold the power • Check the information on the cord, but the plug. manual and installation in- • Make sure the plug is not wet, structions to prepare the dirty or dusty. product for installation and Handling Safety make sure the electrical...
Page 7
• Place the product on a level be running from the tap in a and hard surface and balance minute in order for the product with the adjustable legs. to function properly. If the wa- • Connect the product to a ter pressure is above 1 MPa grounding plug protected by a (10 Bars), a pressure-reducing...
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
charge hose is connected to • Do not use sharp or abrasive the tap. Do not touch the dis- tools to clean the product. Do charge water. not use household cleaners, • Take the following precautions soap, detergent, gas, gasol- to prevent formation of biofilm ine, thinner, alcohol, varnish, and malodours:...
This product was manufactured from recyclable and reusable high quality parts and materials. Therefore, do not dispose of this product with other domestic wastes at the end of its life cycle. Take it to a collection point for electrical and electronic equipment. You can ask your local administration about these collection points.
3 Technical Specifications Supplier’s name or commercial brand Beko CM 9102 BMG Model name 7115520300 Nominal Capacity (kg) Maximum spin speed (cycle/min) 1000 Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet + / -...
4 Installation 4.1 Appropriate Installation Please read the “Safety Instructions” Location section first! • Place the product on a hard and level Your washing machine automatically floor. Do not place it onto a carpet with detects the amount of laundry high pile or other similar surfaces.
Tilt the machine back slightly. Rest the tabs NOTICE of Cover A against the lower panel. Com- Remove the transportation safety plete the assembly by rotating the cover. bolts before operating the product. • Cover B and the Cap are optional. If avail- Otherwise, the product will get dam- able, attach cover B and the Cap.
e. The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the product. Otherwise, water dis- charge issues may emerge. f. If the length of the hose is too short, use it by adding an original extension hose.
• Connection must comply with national 4.8 Start Up regulations. Before starting to use the product make sure • The electrical connection cable infrastruc- that the preparations described in section ture of the product must be adequate and “Environmental instructions” and “Installa- suitable for product requirements.
• Wash trousers and delicate laundry turned not open, apply the solutions provided for inside out. “Loading door cannot be opened” error in • Laundry that are subjected to materials the Troubleshooting section. such as flour, lime dust, milk powder, etc. 5.5 Correct Load Capacity intensely must be shaken off before pla- cing into the product.
Page 17
( ) a syphon piece in the softener compart- Only detergents, softeners and ad- ment, ditives suitable for washing ma- ) there is a liquid detergent apparatus for chines should be used. liquid detergent use in the main washing Do not use soap powder. compartment.
Using Anti-Limescale • When necessary, only use anti-limescale produced for washing machines. Using Bleach and Decolourants • Select a programme with pre-washing and add bleach at the start of pre-washing. Do not put detergent in the pre-wash com- partment. As an alternative application, se- Use of Gel and Tablet Detergents lect a programme with additional rinsing •...
It may be necessary to Powder and liquid deter- pre-treat the stains or per- gents recommended for form prewash. colours can be used at Prefer liquid deter- dosages recommended Liquid detergents Powder and liquid deter- gents produced for heavily soiled clothes. suitable for colours gents recommended for for delicate...
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration information 4 Door lock is engaged symbol 5 Programme follow-up indicator 6 No Water indicator 7 Add Garment Indicator 8 Bluetooth Connection Indicator 9 Remote Control Indicator 10 Delayed Start Enabled Indicator 11 Auxiliary Function Indicators 3 12 Child Lock Enabled symbol...
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine while The auxiliary functions in the table selecting a programme. Depending may vary according to the model of on the amount of laundry you have your machine.
b. Select the desired programme with the dirty. If the quick wash function is not selec- Programme Selection knob. ted, effective washing and rinsing perform- ance is ensured for your heavily soiled laun- dry. • Yünlü / Elde Yıkama Use to wash your woollen/delicate laundry. Select the appropriate temperature comply- ing with the tag of your clothes.
rectly in order not to damage the machine • Gömlek and the duvet. Remove the duvet cover be- This programme is used to wash the shirts fore loading the duvet into the machine. Fold made from cotton, synthetic and synthetic the duvet into two and load it into the ma- blended fabrics altogether.
• Mix When the “Quick Wash” button is pressed twice; Use to wash your cotton and synthetic clothes together without sorting them. Tea, coffee, juice, ketchup, red wine, cola, jam, coal • Sports You can use this programme to wash sports a.
• Towel Whenever a new programme is selected, the recommended spin speed of the selected Use this programme to wash durable cotton programme is displayed on the Spin Speed laundry such as towels. Load the towels into indicator. It is possible that the recommen- the machine paying attention to place them ded spin speed value is not the maximum in a way that they will not contact the door...
If you want to spin the laundry held in water, 6.8.1 Auxiliary Functions adjust the Spin Speed and press Start/ • Ön Yıkama Pause button. The programme will resume. A Prewash is only worthwhile for heavily Water is drained, laundry is spun and the soiled laundry.
up to 4 auxiliary rinsing steps to the pro- • Anti-Crease+ gramme. You can select and use some aux- This function is selected when the spin se- iliary functions even though they are not lection button is pressed and held for 3 found on your product.
To activate the child lock: 6.9 End Time Press and hold the related auxiliary function Time display button for 3 seconds. After the countdown When the end time function is selected, the as “3-2-1" on the display is over, Child Lock remaining time until the programme starts is symbol appears on the display.
If you want to cancel End Time function, c. Loading door is locked. The door lock press On/Off button to turn off and on the symbol appears on the display after the machine. loading door is locked. When you have activated the End Time function, do not add liquid de- tergent in the powder detergent compartment no 2.
adding garments, close the door and press To avoid any water overflow before Start/Pause button once again to resume opening the loading door, make sure the washing cycle. there is no water left inside the ma- chine. a. Turn off and unplug the appliance. b.
Changing the auxiliary function, speed If you do not press any button for 10 and temperature: minutes, the machine will switch to OFF mode. Display and all indicators are turned Depending on the step the programme has off. reached, you can cancel or activate the aux- Completed programme steps will be dis- iliary functions.
Control Function button simultaneously In order to use the HomeWhiz func- for 3 seconds to switch your machine to tion, the application must be in- HomeWhiz setup mode. stalled on your smart appliance, and your washing machine must be paired with your smart appliance via Bluetooth.
6.15.2 Setting up a Washing If you cannot successfully perform Machine Connected to the setup within 5 minutes, your washing machine will turn off auto- Someone Else's Account matically In this case, you will have If the washing machine that you want to use to start over the setup procedure.
If the Remote Control function is off, all oper- If the Bluetooth connection is turned ations are performed over the machine, only on in your product, then the Remote the performance of status follow-up is al- Control function can be selected. lowed over the application.
After every washing make sure that no for- 7.1 Cleaning the Detergent Drawer eign substance is left in the product. Clean the detergent drawer at regular inter- If the holes on the door gasket shown in the vals (once every 4 to 5 wash) as mentioned figure is blocked, open the holes using a below to prevent accumulation of powder toothpick.
propriate brush. If the filters are too dirty, Temperature of the water inside the remove them from their places with a pli- product may rise up to 90 ºC. To ers and clean in this way. avoid the risk of scalding, clean the filter after the water inside the c.
8 Troubleshooting • A hard substance has entered into the Please read the “Safety Instructions” pump filter. >>> Clean the pump filter. section first! • Transportation safety bolts are not re- moved. >>> Remove the transportation Programmes do not start after the safety bolts.
Page 40
• Loading door may be stuck because of • Timer may stop during spinning step. >>> the pressure it is subjected to. >>> Grab Automatic unbalanced load detection sys- the handle and push and pull the loading tem is activated due to the unbalanced door to release and open it.
Page 41
Washing performance is poor: Stains • A higher temperature was selected. >>> persist or the laundry is not whitened. Select the proper programme and temper- (**) ature according to the type and soiling de- gree of the laundry. • Insufficient amount of detergent is used. >>>...
Page 42
step. Wash and clean the drawer with hot • Some meshed laundry such as tulle may water. Put the detergent in the correct foam too much because of their texture. compartment. >>> Use smaller amounts of detergent for • Detergent was mixed with the softener. this type of item.
Page 43
Check the HomeWhiz section for the relevant troubleshooting information. EN / 43...
9 DISCLAIMER / WARNING Some (simple) failures can be adequately The Beko shall not be held responsible for handled by the end-user without any safety any safety problems that may arise due to issue or unsafe use arising, provided that...
Page 47
Incorrect Use and Important Notes on Warranty Paid repair service is required for failures listed below. Warranty terms do not apply for these conditions: Damages and malfunctions due to incorrect use, Damages and malfunctions occurring during the loading, unloading and handling after the product is delivered to the customer, Damages and malfunctions occurring due to electricity (plug, voltage, grounding, etc.), water (water pressure, tap, etc.), natural gas, phone, internet network and/or infrastruc-...