hit counter script
Toshiba Satellite L100-108 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite L100-108
  6. User manual
Toshiba Satellite L100-108 User Manual

Toshiba Satellite L100-108 User Manual

Portable personal computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

User's Manual
L100

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite L100-108

Summary of Contents for Toshiba Satellite L100-108

  • Page 1 User’s Manual L100...
  • Page 2 Copyright © 2005 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
  • Page 3 This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on TOSHIBA’s web site http://epps.toshiba-teg.com on the Internet.

  • Page 4: Optical Disc Drive Safety Instructions

    Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121. Germany Greece Portugal Spain Switzerland All other countries/ regions Specific switch settings or software setup are required for each network,...
  • Page 5 Panasonic DVD Super Multi UJ-850B ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 6 TEAC DVD Super Multi DV-W28EB ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 7 Hitachi-LG Data Storage, Inc. DVD Super Multi GMA-4082N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 8 Pioneer DVD Super Multi DVR-K16 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 9 DVD Super Multi ND-7550A ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 10 TOSHIBA SAMSUNG STORAGE TECHNOLOGY DVD-ROM and CD-R/RW TS-L462C ■ The DVD-ROM and CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 11 Panasonic DVD-ROM and CD-R/RW UJDA770 ■ The DVD-ROM and CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 12 International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.”...
  • Page 13 OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
  • Page 14 User’s Manual...

  • Page 15: Table Of Contents

    Table of Contents Preface General Precautions Introduction Chapter 1 Equipment checklist........1-1 Features.
  • Page 16 Operating Basics Chapter 4 Using the Touch Pad ........4-1 Using the optical media drive .
  • Page 17 TOSHIBA support ........
  • Page 18 Table of Contents xviii User’s Manual...

  • Page 19: Preface

    This manual tells how to set up and begin using your TOSHIBA L100 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
  • Page 20 Chapter 6, Power and Power-Up power resources and battery save modes. Chapter 7, HW Setup HW Setup program. Chapter 8, Optional Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn’t seem to be working properly.
  • Page 21 Display Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.
  • Page 22 Preface xxii User’s Manual...

  • Page 23: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 24 For optimum performance, use your computer product only under recommended conditions. Read additional restrictions under “Environmental Requirements” in Appendix A, Specifications. Contact TOSHIBA Technical Service and Support for more information. xxiv User’s Manual...

  • Page 25: Working Environment

    EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected / implemented those options / cables have to provide assurance that the system (PC plus options / cables) still fulfils the required standards.

  • Page 26: Wireless Lan And Your Health

    Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

  • Page 27: Limitation Of Liability

    Limitation of Liability For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident, intentional or accidental mistakes by a user, misuse, use under abnormal conditions, we do not take any responsibility. For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product, we do not take any responsibility.
  • Page 28 WARNING Turn OFF the Wireless Communication switch of Wireless Products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles.

  • Page 29: Equipment Checklist

    Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.

  • Page 30: Documentation And Backup Media

    TOSHIBA Assist ■ TOSHIBA ConfigFree ■ TOSHIBA Touch and Launch ■ TOSHIBA Power Saver Utility ■ TOSHIBA Touch Pad On/Off Utility ■ TOSHIBA PC Diagnostic Tool ■ TOSHIBA Zooming Utility ■ Sun Java 2 Runtime Environment ■ Modem Region Select Utility ■...

  • Page 31: Features

    Features Processor Built-in Chipset Memory Main Memory Disclaimer Slots Video RAM User’s Manual Depending on the model you purchased: ® ® Intel Celeron M Processor 410 or higher. ® Intel Core™ Solo Processor T1300 or higher. ® Intel Core™ Duo Processor T2300 or higher. Depending on the model you purchased: ®...
  • Page 32 Power Battery Pack RTC Battery AC Adaptor Disks Hard disk Disclaimer 1 Gigabyte (GB) means 10 Hard Disk Drive Your computer is configured with a fixed optical media drive. The available optical media drives are described below. Your computer is powered by a rechargeable lithium-ion battery pack (4000 or 2000 mAh).
  • Page 33 DVD-ROM and CD-R/RW drive DVD Super Multi drive (Supporting DVD±R Double Layer) User’s Manual Some models are equipped with a full-size, DVD-ROM and CD-R/RW drive module that lets you run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.

  • Page 34: Pointing Device

    Display The computer’s LCD panel supports high-resolution video graphics. The screen can be set at a wide range of viewing angles for maximum comfort and readability. Built-In Graphics Controller Keyboard Built-In Pointing Device Built-In Touch Pad Ports External Monitor Universal Serial Bus (USB 2.0) Slots PC Card...
  • Page 35 Multimedia Sound System Video-Out Jack (S-Video) Audio/Video Control Buttons Headphone jack Microphone jack Communications Modem User’s Manual ® A Windows Sound System compatible sound system provides internal speakers as well as jacks for an external microphone and headphones. The video out jack lets you transfer video data to external devices.
  • Page 36 Advanced Encryption Standard (AES) data encryption, based on 128 bit encryption algorithm. Windows ® XP Home Edition or Windows Professional operating system and TOSHIBA Utilities and drivers preinstalled on the hard disk. Refer to the Software section at the front of this chapter.

  • Page 37: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Please note that the descriptions for starting some special features are based on setting the Control Panel to Category View. On Classic view the description is different.
  • Page 38 When I close the lid. When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters Hibernation Mode and shuts down. You can specify the setting in the Setup Action tab in TOSHIBA Power Saver. User’s Manual...

  • Page 39: Utilities

    Data is maintained in the computer’s main memory. When you turn on the power again, you can continue working right where you left off. TOSHIBA Assist is a graphical user interface that provides easy access to help and services. To access this power saving and management program, click the Control Panel, Performance and Maintenance, and TOSHIBA Power Saver.
  • Page 40 This program lets you customize your hardware settings according to the way you work with your computer and the peripherals you use. To start the utility, double click the TOSHIBA Assist on your desktop, select the OPTIMIZE tab , and click TOSHIBA HW Setup.
  • Page 41 TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy TOSHIBA Touch Pad On/Off Utility TOSHIBA Touch and Launch User’s Manual control of communication device and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.

  • Page 42: Options

    Two memory modules can be installed in your computer. An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare or replacement. If you use your computer at more than one site frequently, it may be convenient to purchase an additional AC adaptor for each site so you will not have to carry the adaptor with you.
  • Page 43 Introduction User’s Manual 1-15...
  • Page 44 Introduction 1-16 User’s Manual...

  • Page 45: Chapter 2 The Grand Tour

    The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer’s front with its display panel in the closed position.

  • Page 46: Left Side

    Left side The following figure shows the computer’s left side. External Monitor Port Cooling Vents External Monitor Port Universal Serial Bus (USB 2.0) ports Wireless Communication Switch Set the switch to off in airplanes and hospitals. Check the wireless activity indicator.

  • Page 47: Right Side

    Do not block the cooling vents. Also ensure that foreign objects are kept out of the vents such as pins or similar objects, which can damage the computer’s circuitry. Video-Out Jack Modem Jack Microphone jack Headphone jack Right side The following figure shows the computer’s right side. ODD Indicator LAN Jack ODD (Optical Disk...

  • Page 48: Backside

    Eject Button Emergency Eject Hole Universal Serial Bus (USB 2.0) ports Backside The following figure shows the computer’s back panel. DC IN 19V Jack Security Lock Press this to open the ODD tray. In the event that the disc drive becomes inexplicably locked or stops responding, insert a slender object such as a straightened paper clip into the eject hole to force a manual ejection of...

  • Page 49: Underside

    Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Battery Lock Wireless LAN Cover Battery Pack Battery Lock Battery Release Latch Cooling Vents Memory Module Cover Wireless LAN Cover User’s Manual Battery Pack The underside of the computer...

  • Page 50: Front With The Display Open

    Front with the display open This section shows the front of the computer with the display open. Refer to the appropriate illustration for details. To open the display, slide the display latch on the front of the display and lift up. Position the display at a comfortable viewing angle.

  • Page 51: System & Keyboard Indicators

    Touch Pad Control Buttons Touch Pad System & Keyboard Indicators System & Keyboard indicators Caps Lock Caps Lock NumLock Power User’s Manual These buttons let you select menu items or manipulate text and graphics designated by the on-screen pointer. Refer to the section in Chapter 4, A Touch Pad located in the center of the palm rest is used to control the on-screen pointer.

  • Page 52: Optical Media Drives

    Battery Wireless Activity Built-in HDD/ODD Optical media drives One of the following optical media drives is installed in the computer: DVD-ROM and CD-R/RW or DVD Super Multi drive. An ATAPI interface controller is used for CD/DVD operation. When the computer is accessing a CD/DVD, an indicator on the drive glows.
  • Page 53 ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs can be recorded more than once. Use either 1, 2, or 4 multi speed CD-RW discs or high-speed 4- to 10-speed discs. The write speed of the ultra-speed CD-RW discs (Ultra-speed is available on the DVD-ROM &...

  • Page 54: Ac Adaptor

    DVD Super Multi drive (Supporting DVD±R Double Layer) The full-size DVD Super Multi drive module lets you record data to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
  • Page 55 Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. ■ Use only the AC Adaptor supplied with your computer or an equivalent adapter that is compatible.
  • Page 56 The Grand Tour 2-12 User’s Manual...

  • Page 57: Chapter 3 Getting Started

    Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space — for your health and safety Be sure also to read the Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability.

  • Page 58: Setting Up Your Work Space

    Setting up your work space Establishing a comfortable work site is important for you and your computer. A poor work environment or stressful work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.

  • Page 59: Placement Of The Computer

    Placement of the computer Position the computer and peripheral devices to provide comfort and safety. ■ Set the computer on a flat surface at a comfortable height and distance. ■ The display should be no higher than eye level to avoid eyestrain. ■...

  • Page 60: Work Habits

    Lighting Proper lighting can improve legibility of the display and reduce eyestrain. ■ Position the computer so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted Windows, shades or other screen to eliminate sun glare. ■...

  • Page 61: Installing The Battery Pack

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.

  • Page 62: Connecting The Ac Adaptor

    Use only the AC adaptor supplied with your computer or an equivalent adaptor that is compatible. Use of any incompatible adaptor could damage your computer. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor. ■...

  • Page 63: Opening The Display

    2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the back of the computer. 3. Plug the power cord into a live wall outlet. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing.

  • Page 64: Turning On The Power

    Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Press and hold the computer’s power button for two or three seconds.

  • Page 65: Turning Off The Power

    Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system’s main screen.

  • Page 66: Starting Hibernation Mode

    For the computer to shut down in Hibernation Mode, the hibernation feature must be enabled in two places in Power Options: Hibernate tab and TOSHIBA Power Saver: Basic Setup tab. Otherwise, the computer will shut down in Standby Mode. If battery power becomes depleted, data saved in Standby Mode will be lost.

  • Page 67: Standby Mode

    ■ When the AC adaptor is connected, the computer will go into Standby Mode according to the settings in the TOSHIBA Power Saver. ■ To restore operation from Standby Mode, press the power button or press any key. The latter action works only if Wake-up on Keyboard is enabled in HW Setup.

  • Page 68: Restarting The Computer

    1. Click Start, click Turn Off Computer and click Stand by. 2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility. 3. Press the power button. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility.

  • Page 69: Restoring The Preinstalled Software

    2. Wait 10 to15 seconds, then turn on the computer again. 3. When In Touch with Tomorrow TOSHIBA appears, press the F12 key. 4. Use the up or down cursor key to select the CD/DVD icon in the display menu.
  • Page 70 Getting Started 3-14 User’s Manual...

  • Page 71: Chapter 4 Operating Basics

    Operating Basics This chapter gives information on basic operations including using the Touch Pad, optical media drives, audio/ video controls, sound system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer. Using the Touch Pad To use the Touch Pad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 72: Using The Optical Media Drive

    For some functions, you can tap the Touch Pad instead of pressing a control button. Click: Tap the Touch Pad once Double-click: Tap the Touch Pad twice Drag and drop: 1. Hold down the left control button and move the cursor to drag the item you want to move.

  • Page 73: Loading Discs

    Loading discs To load a disc, follow the steps below and refer to the figures. 1. a. When the power is on, press the eject button to open the drawer slightly. b. Pressing the eject button will not open the drawer when the disc drive’s power is off.
  • Page 74 2. Grasp the drawer gently and pull until it is fully opened. 3. Place the disc, label side up, in the drawer. When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the tray.

  • Page 75: Removing Discs

    4. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with the spindle base. 5. Push the center of the drawer to close it. Press gently until it locks into place.

  • Page 76: Audio/Video Controls

    2. The disc extends slightly over the sides of the drawer so you can hold it. Hold the disc gently and lift it out. 3. Push the center of the drawer to close it. Press gently until it locks into place.

  • Page 77: Writing Cds On A Dvd-Rom And Cd-R/Rw Drive

    Play/Pause and Stop buttons Press the respective button to select the desired function. Play/Pause Stop Writing CDs on a DVD-ROM and CD-R/RW drive Depending on the type of drive installed, you may be able to write CDs. The DVD-ROM and CD-R/RW drive lets you read DVD-ROMs and CDs as well as write CD-Rs/RWs.

  • Page 78: Before Writing Or Rewriting

    MITSUBISHI Chemical Corporation, Ricoh Co., Ltd. ■ Ultra-Speed CD-RW: MITSUBISHI Chemical Corporation TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.

  • Page 79: When Writing Or Rewriting

    Keep mobile phones and other wireless communication devices away from the computer. Disclaimer (DVD-ROM and CD-R/RW drive) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW disc that may be caused by writing or rewriting with this product.

  • Page 80: Writing Cd/Dvds On A Dvd Super Multi Drive Supporting Dvd±R Double Layer

    Disclaimer (DVD Super Multi drive supporting DVD±R Double layer) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product.
  • Page 81 Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 82 ■ There are two types of DVD-R discs: authoring and general use discs. Do not use authoring discs. Only general use discs can be written to by a computer drive. ■ We can support only Format1 of DVD-R DL. Therefore you cannot do the additional writing.
  • Page 83 Always copy data from the hard disk drive to the CD-R/RW,DVD-R/RW/RAM or DVD+R/RW disc. Do not use cut-and-paste. The original data will be lost if there is a write error. RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■...

  • Page 84: Data Verification

    3. Mark the Verify data written to the disc after burning check box in the Data Options. 4. Click OK. DLA for TOSHIBA Note the following limitations when you use DLA: ■ This software supports only rewritable discs (DVD+RW, DVD-RW, and CD-RW).

  • Page 85: Intervideo Windvd Creator Platinum

    ■ Do not use any discs that have been formatted with packet writing software other than DLA. Similarly, do not use any discs that have been formatted with DLA with any packet writing software other than DLA. When using a disc you are not familiar with, format it by selecting “Full Format”...
  • Page 86 2. Before recording the video to DVD ■ When you record to DVD disc, please use only discs recommended by the Drive manufacturer. ■ Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fail to write DVD. ■...

  • Page 87: Media Care

    Media care This section provides tips on protecting data stored on your CD/DVDs and floppy disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVDs 1.

  • Page 88: Sound System

    Sound System This section describes audio controls including sound levels and power management. Volume control The Volume Control utility lets you control the audio volume in Windows for both playback and recording. ■ To launch Volume Control for playback, click start, point to All Programs, point to Accessories, point to Entertainment and click Volume Control.

  • Page 89: Region Selection

    To select a region, follow the steps below. 1. Click start, point to All Programs, TOSHIBA, Networking, and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 90: Modem Selection

    Open dialog box, if the modem and Telephony Current Location region code do not match. A warning dialog box is displayed if current settings for region code and telephony location are incorrect. Modem Selection If the computer cannot recognize the internal modem, a dialog box is displayed.

  • Page 91: Wireless Lan

    TOSHIBA strongly recommend the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. User’s Manual 4-21...

  • Page 92: Wireless Communication Switch

    Wireless communication switch You can enable or disable the Wireless LAN function with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch to the left (toward the back of the computer) turn it off and to the right (toward the front of the computer) to turn it on.

  • Page 93: Lan

    The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation.

  • Page 94: Cleaning The Computer

    Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.
  • Page 95 Operating Basics Protruded portion User’s Manual 4-25...
  • Page 96 Operating Basics 4-26 User’s Manual...

  • Page 97: Chapter 5 The Keyboard

    The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.

  • Page 98: F1 ... F12 Function Keys

    F1 ... F12 function keys The function keys (not to be confused with Fn) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed.

  • Page 99: Hot Keys

    Continue holding down Fn and press F2 again to change the setting. You can also change this setting through the Profile item in TOSHIBA Power Saver. Standby: When you press Fn + F3, the computer enters Standby Mode. To avoid entering Standby Mode unexpectedly, a dialog box appears for verification.
  • Page 100 You can also change this setting through the Screen brightness item of the Basic Setup tab in TOSHIBA Power Saver. Display clarity increases with the brightness level. Wireless setting: Pressing Fn + F8 allows you to switch between active wireless devices if the wireless communication switch is turned on.

  • Page 101: Fn Sticky Key

    Fn Sticky key You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an “F number” key. To start the TOSHIBA Accessibility Utility, click start, point to All Programs, point to TOSHIBA, point to Utilities and click Accessibility.

  • Page 102: Windows Special Keys

    Windows special keys The keyboard provides two keys that have special functions in Windows ® Windows logo key activates the start menu and the other, the application key, has the same function as the secondary mouse button. This key activates the Windows This key has the same function as the secondary mouse button.

  • Page 103: Generating Ascii Characters

    Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off. 2.
  • Page 104 The Keyboard User’s Manual...

  • Page 105: Chapter 6 Power And Power-Up Modes

    Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a...

  • Page 106: Power Inclicators

    Table Power conditions Universal AC Battery charge is above low battery adaptor not trigger point connected Battery charge is below low battery trigger point Battery charge is exhausted No Battery installed Power inclicators As shown in the above table, the Battery and Power indicators on the system indicator panel alert you to the computer’s operating capability and battery charge status.

  • Page 107: Battery Types

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Standby Mode.

  • Page 108: Real Time Clock Battery

    The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 109: Care And Use Of The Battery Pack

    If the following message is displayed on the LCD: The charge in the RTC battery is getting low or has been exhausted. You will need to set the date and time within the BIOS setup using the following steps: 1. Press F2 key - the BIOS setup screen will be displayed. 2.
  • Page 110 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. User’s Manual...
  • Page 111 2. Never dispose of battery packs with normal trash. Bring them to your TOSHIBA dealer or to another recycling center to save resources and prevent environmental damage. Cover the terminals with electrical tape to prevent short-circuits, which could cause the battery pack to ignite or rupture.

  • Page 112: Charging The Batteries

    The computer enters Hibernate Mode only if Hibernation is enabled in two places: the Hibernate tab in Power Options and Setup Action tab in TOSHIBA Power Saver. You must recharge a battery pack when it becomes discharged. Procedures...

  • Page 113: Battery Charging Notice

    Therefore, an often used, older battery will not operate for as long as a new battery even when both are fully charged. In this case, TOSHIBA Power Saver will indicate a 100% charge for both the old and new battery, but the displayed estimated time remaining will be shorter for the older battery.

  • Page 114: Maximizing Battery Operating Time

    How you configure the computer (for example, whether you enable battery-power saving options). The computer provides a battery save mode, which can be set in the TOSHIBA Power Saver to conserve battery power. This mode has the following options: ■...

  • Page 115: Extending Battery Life

    Extending battery life To maximize the life of your battery pack: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below. 1.

  • Page 116: Replacing The Battery Pack

    Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. The life of the battery pack is generally about 500 recharges. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced.

  • Page 117: Starting The Computer By Password

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.

  • Page 118: Power-Up Modes

    Chapter 3, Windows ® utilities You can specify the setting in the TOSHIBA Power Saver. Hot keys You can use hot keys Fn + F3 to enter Standby Mode and Fn + F4 to enter Hibernation Mode. Refer to Chapter 5,...

  • Page 119: Chapter 7 Hw Setup

    HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB. Accessing HW Setup To run HW Setup, click Start, click Control Panel, click Printers and Other Hardware and select TOSHIBA HW Setup.

  • Page 120: Boot Priority

    General This window displays the BIOS version and contains two buttons: Default About Setup This field displays BIOS Version and date. Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.
  • Page 121 Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Standby mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in standby mode. Enabled Disabled USB KB/Mouse/FDD Legacy Emulation...
  • Page 122 HW Setup User’s Manual...

  • Page 123: Chapter 8 Optional Devices

    Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ PC card ■ Memory expansion Power devices ■ Additional battery pack ■...

  • Page 124: Pc Card

    The computer is equipped with a PC Card slot that can accommodate one Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC Cards, including PC Card 16’s multifunction card and CardBus PC Cards.

  • Page 125: Memory Expansion

    RAM. This section describes how to install and remove a memory module. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost.

  • Page 126: Installing A Memory Module

    Use a point size 1 Phillips screwdriver to remove and fasten the screws. Use of an incorrect screwdriver can damage the screw heads. Installing a memory module Follow the steps below to install a memory module. 1. Set the computer to boot mode and turn off the power. 2.

  • Page 127: Removing A Memory Module

    7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. 8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chapter 6, Modes.

  • Page 128: Additional Battery Pack

    5. Grasp the module by the sides and pull it out. ■ If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Or you will get burnt if you touch any of them.

  • Page 129: Usb Floppy Disk Drive

    USB floppy disk drive The 3 1/2" external floppy disk drive module can be connected to the USB port. Disk-In-Use Indicator Disk-In-Use Indicator Floppy Disk Slot Eject Button Check the Disk-In-Use indicator when you use the floppy disk drive. Do not press the eject button or turn off the computer while the light is glowing.

  • Page 130: Using The Usb Floppy Disk Drive

    Using the USB floppy disk drive The USB floppy disk drive connects to any of the computer’s USB ports. It accommodates 1.44-megabyte or 720-kilobyte floppy disks. (You cannot format 720-kilobyte floppy disks on Windows use previously formated disks.) Connecting 3 1/2" floppy disk drive To connect the drive, plug the floppy disk drive connector into a USB port.

  • Page 131: External Monitor

    Disconnecting 3 1/2" floppy disk drive When you have finished using the floppy disk drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all floppy disk activity has stopped. If you disconnect the floppy disk drive or turn off the power while the computer is accessing the drive you may lose data or damage the floppy disk or the drive.
  • Page 132 A TV output feature is provided with some models. You can connect a television set to the Video out jack on the computer. Follow the steps below. If a television is connected to the computer, set the TV type in Display Properties.

  • Page 133: Security Lock

    ■ ATI RADEON XPRESS 200M Series 1. Open Control Panel, click Appearance and Themes. 2. Click Display. 3. Select Settings tab. 4. Click Advanced in Display Properties. 5. Select Displays tab in (Multiple Monitors) and ATI RADEON XPRESS 200M Series Properties. 6.
  • Page 134 Optional Devices 8-12 User’s Manual...

  • Page 135: Troubleshooting

    Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 136: Preliminary Checklist

    Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 137: Hardware And System Checklist

    Software Hardware Hardware and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals. Basic problems may occur in the following areas: ■ System start-up ■ Self test ■ Power ■ Real Time Clock ■ Keyboard ■...

  • Page 138: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■...

  • Page 139: Ac Power

    AC power If you have trouble turning on the computer with the AC adaptor connected, check the Battery Indicator indicator. Refer to Chapter 6, Power-Up Modes Problem AC adaptor doesn’t power the computer Battery If you suspect a problem with the battery, check the Battery indicator. For information on indicator and battery operation refer to Chapter 6, and Power-Up Problem...

  • Page 140: Real Time Clock

    Fully discharge the battery, then try to charge it again. Check the power consumption settings in the TOSHIBA Power Saver. Consider using a power saving feature. Procedure Charge in the RTC battery is exhausted or getting low.

  • Page 141: Lcd Panel

    Keyboard Keyboard problems can be caused by your setup configuration. For more information, refer to Chapter 5, Problem Some letter keys produce numbers Output to screen is garbled LCD panel Apparent LCD problems may be related to the computer’s setup. Problem No display Problems above remain...
  • Page 142 DVD-ROM and CD-R/RW drive For more information, refer to Chapter 4, Problem You cannot access a CD/DVD in the drive Some CD/DVDs run correctly, but others do Operating Procedure Make sure the drive’s drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated.
  • Page 143 User’s Manual Procedure If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 144: Floppy Disk Drive

    Problem Some CD/DVDs run correctly, but others do Floppy disk drive For more information, refer to Chapter 8, Problem Drive does not operate There may be a faulty cable connection. Check Some programs run correctly but others do You cannot access the external 3 1/2"...

  • Page 145: Touch Pad

    PC Card Refer also to Chapter 8, Problem PC Card error occurs Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. Touch Pad Problem On-screen pointer does not respond to Pad operation Double-tapping does...

  • Page 146: Usb Mouse

    Problem The response of the Touch Pad is too sensitive USB mouse Problem On-screen pointer does not respond to mouse operation Double-clicking does not work 9-12 Procedure Adjust the touch sensitivity. 1. Open the Control Panel. 2. Click the Printers and Other Hardware icon. 3.
  • Page 147 Problem The mouse pointer moves too fast or too slow The mouse pointer moves erratically Refer also to your USB device’s documentation. Problem USB device does not work Memory expansion Refer also to Chapter 8, memory modules. Problem The computer hangs up and issues sounds.
  • Page 148 Sound system Refer also to the documentation for your audio devices. Problem No sound is heard Monitor Refer also to Chapter 8, documentation. Problem Monitor does not turn No display Display error occurs Modem Problem Communication software can’t initialize modem You can hear a dial tone but can’t make a call You place a call, but a...
  • Page 149 Problem After making a call you can’t hear a ring Communication is cut off unexpectedly A CONNECT display is quickly replaced by NO CARRIER Character display becomes garbled during a communication You cannot receive an incoming call Problem Cannot access LAN Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator.

  • Page 150: Toshiba Support

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.

  • Page 151: Specifications

    Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Weight Size Environmental Requirements Conditions Ambient temperature Thermal grandient Relative humidity Altitude (from sea level) 0 to 3,000meters Power Requirements AC adaptor Computer User’s Manual Appendix A 2.6kg - 2.8kg * * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected.
  • Page 152 Built-in Modem Network control unit (NCU) Type of NCU Type of line Type of dialing Control command Monitor function Communication specifications Communication System Communication protocol Communication Speed Transmitting level Receiving level Input/output impedance Error correcting Data compression Power supply Telephone line (analog only) Pulse Tone AT commands...

  • Page 153: Display Controller

    Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular picture elements (pels) on or off. The controller is an advanced Video Graphics Array (VGA) that provides Extended Graphics Array (XGA) support for the internal LCD and external monitors.

  • Page 154: Video Modes

    Video modes The computer supports video modes defined in the tables below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on mode type, resolution, character matrix, number of colors and refresh rates. Also, if your software supports both graphics and text modes, the screen display may appear to operate faster using a text mode.
  • Page 155 Table 1: Video modes (VGA) (continued) Video Type Resolution mode 320 x 200 Grph Pels 640 x 200 Grph Pels 640 × 350 Grph Pels 640 × 350 Grph Pels 640 × 480 Grph Pels 640 × 480 Grph Pels 320 x 200 Grph Pels...
  • Page 156 Table 2: Video modes Resolution LCD colors 800 x 600 256K/256K 1024 x 768 256K/256K 1280 x 1024 256K/256K (Virtual) 1600 x 1200 256K/256K (Virtual) 1920 x 1440 256K/256K (ATI: Virtual / Intel: Not supported) 2048 x 1536 256K/256K (ATI: Virtual / Intel: Not supported) Some modes are not supported at LCD+CRT simultaneous mode and LCD+CRT Multi Monitor mode.
  • Page 157 Table 2: Video modes (continued) Resolution LCD colors 800 x 600 64K/64K 1024 x 768 64K/64K 1280 x 1024 64K/64K 1600 x 1200 64K/64K 1920 x 1440 64K/64K (ATI: Virtual / Intel: Not supported) 2048 x 1536 64K/64K (ATI: Virtual / Intel: Not supported) Some modes are not supported at LCD+CRT simultaneous mode and LCD+CRT Multi Monitor mode.
  • Page 158 Table 2: Video modes (continued) Resolution LCD colors 800 x 600 16M/16M 1024 x 768 16M/16M 1280 x 1024 16M/16M (Virtual) 1600 x 1200 16M/16M (Virtual) 1920 x 1440 16M/16M (ATI: Virtual / Intel: Not supported) 2048 x 1536 16M/16M (ATI: Virtual / Intel: Not supported) Some modes are not supported at LCD+CRT simultaneous mode and...

  • Page 159: Display Settings

    Display Settings 1. You cannot move from the Settings tab of Display Properties to the multi-monitor when you are using the display of the computer and an external CRT display at the same time. ■ The Settings tab is displayed in the following steps; ■...
  • Page 160 ■ The way to move to multi-monitor (ATI RADEON XPRESS 200M) ■ Switch to Display Properties, like shown in previous page. ■ Click Advanced in Display Properties. ■ Select Displays tab in (Multiple Monitors) and ATI RADEON XPRESS 200M Series Properties. ■...
  • Page 161 Display Controller and Modes 5. When the LCD (internal liquid crystal display) display mode is selected, the Virtual (Virtual Screen) display mode can be set. However, afterwards, it may not possible to change the screen resolution to more than 1280 x 1024 pixels in Highest (32bit) mode (for example, when you attempt to set the resolution to 1600 x 1200 using the Screen resolution slide bar and then select Highest (32bit) mode from the Color quality drop-down menu).
  • Page 162 Display Controller and Modes B-10 User’s Manual...

  • Page 163: Card Specifications

    Wireless LAN Card Specifications Form Factor Compatibility Network Operating System Media Access Protocol Data Rate The Wireless LAN feature is not available on all models. User’s Manual Appendix C Mini PCI TypeIII or PCI Express MiniCard ■ IEEE 802.11 Standard for Wireless LANs ■...

  • Page 164: Radio Characteristics

    Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
  • Page 165 Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 166 When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.

  • Page 167: Certification Agencies

    AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Wire size:...
  • Page 168 Europe: Austria: Belgium: Denmark: Finland: France: Germany: In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.

  • Page 169: If Your Computer Is Stolen

    What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.

  • Page 170: Toshiba Theft Registration

    TOSHIBA Theft Registration Send to: Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite A50) Model number: (e.g. PSA50 YXT) Serial number: (e.g. 12345678G) Date stolen: Owner’s details Last name, first name: Company: Street: Postal Code/City:...
  • Page 171 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write...
  • Page 172 LED: light emitting diode LSI: large scale integration MS-DOS: Microsoft OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock SCSI: small computer system interface SIO: serial input/output SXGA+: super extended graphics array plus...
  • Page 173 application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games. ASCII: American Standard Code for Information Interchange. ASCII code is a set of 256 binary codes that represent the most commonly used letters, numbers, and symbols.
  • Page 174 cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
  • Page 175 computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information. configuration: The specific components in your system (such as the terminal, printer, and disk drives) and the settings that define how your system works.
  • Page 176 disk storage: Storing data on magnetic disk. Data is arranged on concentric tracks much like a phonograph record. display: A CRT, LCD, or other image producing device used to view computer output. documentation: The set of manuals and/or other instructions written for the users of a computer system or application.
  • Page 177 Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 178 input: The data or instructions you provide to a computer, communication device or other peripheral device from the keyboard or external or internal storage devices. The data sent (or output) by the sending computer is input for the receiving computer. instruction: Statements or commands that specify how to perform a particular task.
  • Page 179 LSI: Large Scale Integration. 1) A technology that allows the inclusion of up to 100,000 simple logic gates on a single chip. 2) An integrated circuit that uses large scale integration. main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte.
  • Page 180 online state: A functional state of a peripheral device when it is ready to receive or transmit data. operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices.
  • Page 181 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to.
  • Page 182 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 183 Index AC adaptor, 1-4 additional, 1-14 connecting, 3-6 ASCII characters, 5-7 Battery charging, 6-8 extending battery life, 6-11 indicator, 6-1 location, 2-5 Monitoring capacity, 6-9 real time clock, 1-4, 6-4 safety precautions, 6-5 save mode, 1-10 types, 6-3 Battery pack, 1-4 additional, 8-6 replacing, 6-12 CD-RW/DVD-ROM drive, 1-5...
  • Page 184 Monitor, 9-14 overheating power down, 9-4 PC card, 9-11 Pointing device, 9-11 Power, 9-4 Real Time Clock, 9-6 Self test, 9-4 Sound system, 9-14 Support from TOSHIBA, 9-16 System start-up, 9-3 USB, 9-13 Wireless LAN, 9-15 Processor, 1-3 User’s Manual...
  • Page 185 1-7 microphone jack, 1-7 mute hot keys, 5-3 Standby, 1-11 setting, 3-11 System automatic, 1-10 TOSHIBA ConfigFree, 1-13 TOSHIBA PC DiagnosticTool, 1-12 TOSHIBA Theft Registration, E-2 TOSHIBA Utilities, 1-8 TOSHIBA Zooming Utility, 1-12 Touch Pad, 1-6 location, 2-6 using, 4-1...
  • Page 186 Index Index-4 User’s Manual...

This manual is also suitable for:

Satellite l100-111Satellite l100-121Satellite l100-175Satellite l100-173Satellite l100-194Satellite pro l100 ... Show all

Table of Contents