Miele PDR 914 Operating And Installation Instructions
Commercial tumble dryers
Hide thumbs
Also See for PDR 914:
- Quick start manual (144 pages) ,
- Operating and installation instructions (56 pages) ,
- Quick start manual (140 pages)
Related Manuals for Miele PDR 914
Summary of Contents for Miele PDR 914
- Page 1 Operating and Installation Instructions Commercial Tumble Dryers PDR 914/918/922/928/944 To prevent accidents and machine damage, read en-US, CA these instructions before installation or use. M.-Nr. 11 786 011...
- Page 2 WARNING: FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly could result in serious injury, death or prop- erty damage. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS Do not try to light any appliance.
-
Page 3: Caring For The Environment
Caring for the environment Disposal of the packaging material The packaging material protects the dryer from transport damage. The packaging materials used are selected from materials which are envi- ronmentally friendly for disposal and can therefore be recycled. Recycling the packaging material reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites. -
Page 4: Table Of Contents
Contents Caring for the environment ......................IMPORTANT SAFETY INSTRUCTIONS ................. Appropriate use ..........................Preventing misuse ......................... Technical safety ..........................Dryers with gas heating ......................11 Correct use............................. 12 Accessories ............................ 12 Description of the machine ....................... 13 Operating the tumble dryer ....................... 14 Control panel.......................... - Page 5 Contents Timer ............................... 28 Prerequisite for setting the timer ................... 28 Setting the timer........................28 Changing the program sequence ..................... 29 Changing a program once it has started ..................29 Canceling the current program....................29 Reselecting a canceled program .................... 29 Time left ............................
- Page 6 Additional fan ..........................40 Pressure sensor ........................40 Peak load signal ........................40 Peak load prevention........................ 41 Select KOM module......................... 41 Availability of Miele digital products ..................41 WiFi / LAN ..........................41 Remote............................42 Remote Update......................... 42 Machine parameters........................43 Legal Information ........................
- Page 7 Contents Networking ............................ 73 Pairing instructions ........................73 Opening the supervisor level ....................73 Establishing the network connection via WPS ..............73 Establishing the network connection via soft AP ..............73 Establishing the network connection using a LAN cable............ 73 Optional accessories........................
-
Page 8: Important Safety Instructions
IMPORTANT SAFETY INSTRUC- TIONS. Miele cannot be held liable for injury or damage caused by non-compliance with these in- structions. Keep these Operating Instructions in a safe place and pass them on to any future user. -
Page 9: Preventing Misuse
IMPORTANT SAFETY INSTRUCTIONS Preventing misuse Do not make any alterations to the tumble dryer, unless authorized to do so by Miele. Do not lean on the dryer door. Otherwise, the tumble dryer may tip over, causing injury to ... - Page 10 Unauthorized repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be carried out by a Miele authorized technician, otherwise any subsequent damage may not be covered by the warranty. Repair instructions can be requested from Miele.
-
Page 11: Dryers With Gas Heating
Ensure that no closeable door, sliding door, or an oppositely hinged door is installed that would hinder the drum door being opened in any way. If the power cord is damaged, it should be replaced by a Miele authorized technician in order to protect the user from harm. -
Page 12: Correct Use
Only use genuine Miele spare parts and accessories with this machine. Using parts or accessories from other manufacturers may invalidate the warranty, and Miele cannot ac- cept liability. Miele cannot be held liable for damage caused by failure to comply with these IM- PORTANT SAFETY INSTRUCTIONS. -
Page 13: Description Of The Machine
Description of the machine ① ⑨ ⑥ ⑤ ⑩ ② ⑦ ③ ⑧ ④ Control panel with touch display Door Lint filter flap 4 height-adjustable screw feet Electrical connection Communication module slot Intake vents for drying air Exhaust duct Connection for communication box Communication box (optional) For setting up a connection with external systems... -
Page 14: Operating The Tumble Dryer
For starting the selected drying program and canceling a program once it has started. The program selected can be started as soon as the sensor button starts flashing. Optical interface For Miele Service button For switching the tumble dryer on and off. The tumble dryer switches off automatically to save energy. -
Page 15: Sensor Buttons And Touch Display With Sensor Buttons
Operating the tumble dryer Sensor buttons and touch display with sensor buttons The , , and Start/Stop sensor buttons and the sensor buttons in the display react to finger-tip contact. Every tap of a sensor button is confirmed with an audible keypad tone. You can adjust the volume of the keypad tone or switch it off (see “Supervisor level”). The control field with sensor buttons and the touch display can be scratched by pointed or sharp objects, e.g., pens. -
Page 16: Setting Numerical Values
Operating the tumble dryer The orange scroll bar in the bottom display area shows that there are further options to choose from. To select the required drying program, touch the program name with your finger. The display will now change to the standard menu for that program. “Extras”... -
Page 17: Pull-Down Menu
Operating the tumble dryer Clock display 12:00 To enter the numerical value, touch the numbers on the right-hand side and then confirm with OK. Pull-down menu The pull-down menu can be used to display information (e.g., about a drying program). ... -
Page 18: Before Using For The First Time
Some settings can only be modified during the initial commissioning process. After that, they can only be changed by Miele Service. These settings are also described under “Supervisor level”. Switching on the tumble dryer Press the button. -
Page 19: Setting The Display Brightness
Before using for the first time Setting the display brightness You will be asked to select the brightness of the display. Display brightness Darker Brighter Touch the segment bar for the required level of brightness. The selected level of brightness is represented by the length of the segment bar. -
Page 20: Completing The Initial Commissioning Process
“Supervisor level” chapter. These settings can only be changed during the initial commissioning process. If you wish to change the settings after the commissioning process, please contact Miele Service. If you do not wish to set up a payment system, you can skip this stage. - Page 21 Before using for the first time If the power is interrupted prior to the start of the first drying pro- gram (e.g., if the machine is switched off with the button), the ini- tial commissioning process can be completed again. Once a drying program has been running for over 10 minutes, the initial commis- sioning process cannot be performed again.
-
Page 22: Drying
Drying 1. Notes on correct laundry care Washing before Heavily soiled laundry must be washed particularly thoroughly. Use drying sufficient detergent and select a high wash temperature. If in doubt, wash the items several times. The tumble dryer must not be used for drying items of laundry which have been cleaned using industrial chemicals. -
Page 23: Loading The Tumble Dryer
Drying 2. Loading the tumble dryer Loading laundry Textiles may be damaged. into the tumble Before loading, read chapter “1. Notes on correct laundry care” first. dryer Open the door. Load laundry into the tumble dryer. Do not overload the drum. Overloading can cause unnecessary wear and tear to the laundry and cause a disappointing drying result. -
Page 24: Selecting Program Settings
Drying Programs 11:02 Cottons Cottons Woolens Cottons PRO Minimum iron Delicates Swipe to the left until you reach the required program. Touch the sensor button for that program. The display will change to the standard menu for that drying program. Alternatively, you can select a program from the Favorites list. - Page 25 Drying 11:02 Overview Weight Drying level Normal Cottons Drying temp. Extras 0:57 °F not selected Touch the sensor button. Extras Extras 11:02 Gentle tumble Anti-crease Touch the sensor button for the option you want. ...
-
Page 26: Starting A Program
Drying 5. Starting a program Payment system If your machine is connected to a payment system, the amount of (optional) payment required will appear in the display. Money may be lost if the drum door is opened or the program is canceled. -
Page 27: Program End
Drying When using the programs for the first time, the displayed time some- times deviates significantly from the real time left. The difference be- tween the estimated and achieved time becomes smaller if the cor- responding program is run more often. If different load sizes are dried in one program, the time left display can only show an approximate time. -
Page 28: Timer
Drying Timer Prerequisite for The Delay start must be activated in the Supervisor level in the Con- setting the timer trols / Display menu so that the Timer can be selected. Before the pro- gram starts, the Timer can be used to select a program start time or program end time. -
Page 29: Changing The Program Sequence
Changing the program sequence Changing a program once it has started You cannot change to another program once a program has started (this prevents unintentional alterations). You will need to cancel the current program before you can select a new one. ... -
Page 30: Supervisor Level
Supervisor level Opening the Supervisor level 11:02 Programs Favorites Supervisor Help Touching the sensor button takes you to the Supervisor level. Access via code The supervisor level is accessed using a code. Factory default: The code is 000. Change code You can alter the supervisor-level access code to protect the tumble dryer from unautho- rized access. -
Page 31: Set Languages
Supervisor level 6 languages are available. The sensor button is not active. Note the setting Set lan- guages Language setting The sensor button can be used to select a language. All languages are available (fac- tory default). You can change the order of the first 4 languages. These slots are allocated to the most commonly used languages. -
Page 32: Volume
Supervisor level Volume The volume for various sounds can be changed. The volume can be changed for the following tones: Finish tone The finish tone signals the end of the drying program. Keypad tone Welcome tone Fault alarm The fault tone signals a fault and can be switched off. The volume of the fault tone cannot be adjusted. -
Page 33: Machine Off Status
Supervisor level On (30 min.) Not curr.prog. The display will remain on while the program is running but will go out 30 minutes after the end of the program. Logo (30 min.) Not curr.prog. The display will remain on while the program is running but the logo will light up 30 min- utes after the end of the program. -
Page 34: Program Selection
Supervisor level Program selection Controls You can select whether the tumble dryer is operated as a “laundromat” machine. Short- cuts are the easiest way to operate the machine. Operating staff are unable to change pre- set programs. Tip: Start by configuring all necessary settings and changes to the tumble dryer before ad- justing any of the options below. -
Page 35: Program Packages
Supervisor level Program packages This allows you to specify the scope of the tumble dryer's program. You can select all of the programs or individual programs from the relevant program packages. The tumble dryer’s additional scope of programs can be configured. The programs are listed under “Program overview”. -
Page 36: Sort Programs
Supervisor level Temperature (Process air): cold – 165°F (75°C) Cooling down temperature (Process air): 105–130°F (40–55°C) – Drum rotation main direction 20–600 seconds – Pause: 2–15 seconds – Drum reversal 20–600 seconds Anti-crease – Drum rotation main direction 0–500 seconds – Pause 100–3,000 seconds – Drum reversal 0–500 seconds Timed drying... -
Page 37: Program Color Allocation
Supervisor level Moving programs/favorites You can move/change the order of the programs (program menu – single option list). You can also move and change the order of the favorites that you edit in the Supervisor level un- der Favorite programs. Touch the program that you wish to move. -
Page 38: Service
If the message appears on the display even though the lint filter is clean, the vent ducting is regarded as borderline. Miele recommends improving the vent ducting. Poor vent duct- ing will result in longer program runtimes and greater energy consumption. - Page 39 Supervisor level - By time You can then select a time interval from 1–9999 hours. - By date You can enter a date. Message text Enter your message for your planned maintenance work. You can edit one, two, or all three of the 1/2/3 messages.
-
Page 40: External Applications
Supervisor level External applications External exhaust flap External hardware is connected via the Miele Connector Box. The time delay between the external exhaust-air flap's activation point and the switch-on time for the drum/fan motor is regulated. A message appears in the display while the exhaust air flap is open. -
Page 41: Peak Load Prevention
An XKM module is inserted into the module slot. Availability of Miele digital products The ability of Miele digital products depends on the availability of the services in your coun- try. The different services are not available in all countries. -
Page 42: Remote
However, Miele recommends installing RemoteUpdates. Miele’s RemoteUpdate function can only be used if the dryer is connected to a WiFi/LAN network and you have an account in the Miele Professional app. The dryer must be regis- tered in the app. -
Page 43: Machine Parameters
You can view information here. Copyrights and licenses For the purpose of operating and controlling the machine, Miele uses proprietary or third- party software that is not covered by open source licensing conditions. This software/these software components are protected by copyright. The copyrights held by Miele and third parties must be respected. -
Page 44: Cleaning And Care
Cleaning and care Cleaning the lint filter Risk of fire if the tumble dryer is operated without a lint filter. If there is no lint filter, the air channels, heating elements, and ducting can become clogged during drying and may catch fire. The lint filter must not be removed for cleaning. -
Page 45: Cleaning The Drum And The Outside Of The Casing
Keep the area around the tumble dryer – in particular the air intake – clear of lint. Additional annual cleaning Miele Technical Service or a trained specialist must check the interior of the tumble dryer and the ducting for lint deposits once per year and clean the machine if necessary. In the case of electrically-heated tumble dryers, the heater bank and the heating shaft must also be checked by Miele Technical Service Department. -
Page 46: Technical Service
Technical Service Contact in case of fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Technical Service. Contact information for Miele Technical Service can be found at the end of this document. -
Page 47: Installation
Incorrect installation of the tumble dryer can lead to personal injury or damage to property. It is recommended that installation and commissioning be accom- plished by Miele Service or an authorized dealer. The tumble dryer must be installed in accordance with all relevant ... -
Page 48: Installing The Tumble Dryer
*INSTALLATION* Installation Installing the tumble dryer Place the tumble dryer on a perfectly level, secure, and horizontal surface that is able to withstand the specified floor load. The floor load created by the tumble dryer is concentrated and trans- ferred to the installation surface via the screw feet. -
Page 49: Securing The Machine
*INSTALLATION* Installation Tip: Use a level to ensure correct alignment. Securing the machine The tumble dryer must be secured to the floor by installing the ten- sioning strips supplied over the machine feet. The material provided is intended for use in bolting the machine to a concrete floor. - Page 50 dryer can be converted for connection to the relevant input voltage. This conversion must be performed by Miele Customer Service or by an authorized dealer. During the conversion, the wiring instructions given on the wiring diagram must be followed.
-
Page 51: Supply Air, Exhaust, And Ventilation Cross-Sections
*INSTALLATION* Installation Supply air, exhaust, and ventilation cross-sections Supply air/exhaust The tumble dryer may only be operated when the ducting has been connected properly and the room is sufficiently ventilated. Calculating the to- The length of the required ductwork and the number and shape of the tal length and di- elbows are determined by the structural conditions on-site. -
Page 52: Substitute Duct Lengths
*INSTALLATION* Installation Substitute duct Type of Type elbow 914/514 918/518 922/522 928/528 944/544 lengths 90° elbow r = 2d 3' 7 5/16" (1.1 m) 45° elbow r = 2d 2' 3 9/16" (0.7 m) 90° elbow r = d 6' 2 13/16" (1.9 m) 45° elbow r = d 3' 7 5/16" (1.1 m) 90°... -
Page 53: Room Ventilation Opening For Air Intake From The Setup Room
*INSTALLATION* Installation The vent ducting must not be channeled into a chimney or flue already in use for any gas-, coal-, or oil-burning installation. The warm and moist exhaust air is to be conducted outside or to a suitable venting duct over the shortest path possible. -
Page 54: Exhaust Connection
*INSTALLATION* Installation Exhaust connec- tion 1 7/16" (37 mm) - Page 55 *INSTALLATION* Installation Example 1 Configuring vent ducting made from steel piping for the PDR 914/514 tumble dryers: L1, L2: each 9' 10" (3 m) steel piping B1, B2: each 90° concertina pipe elbow (r = 2d) 90° elbow (r = d) 1. Total duct length Steel pipe L1 = 9' 10" (3.0 m) Steel pipe L2 = 9' 10" (3.0 m) 90°...
- Page 56 90° elbow (r = d) If the exhaust from multiple appliances is to be ducted into a com- bined line, a non-return device must be installed in each separate line to prevent backflow. PDR 914/514 PDR 918/518 1. Total pipe length Steel pipe L1 = 6' 6" (2.0 m) PDR 914/514...
- Page 57 *INSTALLATION* Installation 2. Pipe diameter Total pipe length = 46' 11" (14.3 m) depending on total Maximum permissible total pipe length pipe length 62' 4" (19 m) = Ø 6" (150 mm) internal pipe diameter (see Table 2) 3. Total pipe length Steel pipe L3 = 6' 6" (2.0 m) PDR 918/518 Steel pipe L4 = 6' 6" (2.0 m) 90° concertina pipe B3 = 10' 6" (3.2 m)* elbow (r = 2d) 45° elbow (r = 2d)
- Page 58 *INSTALLATION* Installation Example 3 Configuring exhaust ducting and a supply pipe made from steel for the PDR 914/514 series tumble dryer: L1, L2: each 6' 6" (2.0 m) steel piping 8' 2" (2.5 m) steel piping B1, B2: 90° concertina pipe elbow for each B3, B4: 90° elbow (r = d) for each 1. Total duct length Steel pipe L1 = 6' 6" (2.0 m)
- Page 59 *INSTALLATION* Installation Configuring the Rooms in which rotary irons and tumble dryers are operated room ventilation must have an induced ventilation system (e.g., ventilation slots in opening windows and doors, wall openings with grilles, or opened windows or skylights). For example 1 A duct diameter of 6" (150 mm) was specified in example 1.
-
Page 60: Steam Connection (Only For Steam-Heated Variants)
If the gas type is changed, a conversion kit must be requested from Miele Service (please specify the machine type, serial number, gas type, gas group, gas connection pressure, and country of installation). -
Page 61: Gas
*INSTALLATION* Installation Take these safety - Extinguish all flames immediately. precautions if you - Close the on-site gas shut-off device, the gas shut-off device on smell gas the gas meter or the main gas shut-off device immediately. - Open all windows and doors immediately. - Do not light any naked flames (e.g., matches or lighters). - Page 62 *INSTALLATION* Installation Before completing commissioning, maintenance, conversion, and repair work, all gas-conducting components – from the manual shut-off valve to the burner jet – must be checked for leaks. Particular attention must be paid to the measuring stubs on the gas valve.
- Page 63 26.46 lb/h (12.0 17.64 lb/h (8.0 kg/ 11.02 lb/h (5.0 kg/ kg/h) Exhaust gas evacu- Gas-heated Miele Tumble Dryers are type B gas fuel-burning in- ation ducts stallations without flow safeguarding equipment, and with a fan be- hind the heater. - The mixtures of exhaust gas and air that are emitted by gas-heated tumble dryers must be evacuated through a suitable chimney and out into the atmosphere via the roof.
- Page 64 If the gas type needs to be changed, please request the appro- priate conversion kit from Miele Service. When doing so, please specify the product name and the appliance number, as well as the gas type, gas group, gas connection pressure, and country where the appliance has been set up.
- Page 65 *INSTALLATION* Installation The maximum length of the hose is 6' 6" (2 m). When selecting a hose, the required flow rate and applicable national regulations must also be taken into account.
- Page 66 *INSTALLATION* Installation Main connection Natural gas Liquid propane Hose Reduction sleeve* Threaded union* * Supplied with the kit for converting natural gas to propane (LP).
- Page 67 *INSTALLATION* Installation Gas regulator valve Connection pressure measuring stub Pressure regulator Electrical plug Jet pressure adjust- Make sure that the maximum pressure is set first. Else the mini- ment mum pressure would be changed by turning the nut. Loosen the locking bolts of the connection pressure and jet pressure ...
- Page 68 *INSTALLATION* Installation Burner PDR x14/x18/x22 = 1 jet; PDR x28/x44 = 2 jets PDR 928/528 PDR 944/544 Burner conversion Replace the jet and the sealing ring (included with the conversion kit). - Natural gas = large hole - Liquid propane = small hole Additional steps necessary to convert to liquid gas are outlined in the “Conversion kit for natural gas to liquid gas conversion”.
-
Page 69: Steam
In addition to these installation instructions, the information from the data plate, wiring diagram, and documentation accompanying the appliance must also be noted and complied with when connect- ing steam-heated Miele appliances. Operating pres- High-pressure steam version, indirect HP indir. -
Page 70: Fitting Information For Steam And Condensate Hoses
The hot water connection may only be carried out by an autho- rized or trained/certified technician. In addition to these installation instructions, the information from the data plate, wiring diagram, and documentation accompanying the appliance must also be noted and complied with when connect- ing hot water-heated Miele appliances. -
Page 71: Operating Conditions
*INSTALLATION* Installation Operating condi- Operating pressure Feed water temperature Peak capacity tions 87 - 145 psi / 600 – 1,000 kPa 158 – 203°F (70 – 95°C) 1.32 – 6.6 gal/min (0.3 – 1.5 m³/ (6 – 10 bar) For reasons of efficiency, the operating pressures must not fall below the specified values. - Page 72 *INSTALLATION* Installation Risk of electric shock and injury due to using the tumble dryer without the complete casing. If the casing is dismantled, it is possible to come into contact with live or rotating machine parts. Once the tumble dryer has been installed, completely replace all the casing parts that were removed.
-
Page 73: Networking
Networking Pairing instructions Follow the steps below to connect the tumble dryer to your network. Opening the supervisor level Select the menu option in the machine display. Supervisor Select the menu option. Access via code Enter the 3-digit supervisor code. ... - Page 74 Networking The machine is now successfully connected. System requirements for WiFi - WiFi 802.11b/g/n - 2.4 GHz band - WPA/WPA2 encryption - DHCP activated - multicastDNS/Bonjour/IGMP snooping activated - Ports 443, 80, 53, and 5353 open - IP DNS server = IP standard gateway/router - Mesh/repeater use: same SSID and password as standard gateway/router - SSID must be permanently visible System requirements for LAN...
- Page 75 Networking WiFi signal strength – Guide values The WiFi signal strength is only a rough guide. These details do not provide absolute cer- tainty. The WiFi signal strength can be read via the MDU or directly on the machine. WiFi signal strength Meaning ...
-
Page 76: Optional Accessories
This module forms the basis for wired communication with Miele MOVE. It is not possible to integrate the machine into the “Miele@home” app for domestic in- stallations. The communication module is intended exclusively for commercial use and is supplied with voltage directly via the Miele Professional machine. -
Page 77: Original Spare Parts And Accessories
(this does not apply to digital products or products for process documentation). Contact Miele Customer Service if you need spare parts and accessories or would like per- sonalized advice. Danger due to improperly performed service and repair work. -
Page 78: Technical Data
Technical data PDR 914 PDR 918 PDR 922 PDR 928 PDR 944 Height 55 1/8" 55 1/8" 55 1/8" 64 9/16" 64 9/16" (1,400 mm) (1,400 mm) (1,400 mm) (1,640 mm) (1,640 mm) Width 35 11/16" 35 11/16" 35 11/16" 47 1/2" 47 1/2" (906 mm) (906 mm) (906 mm) (1,206 mm) (1,206 mm) Depth 33 9/16"... - Page 80 Miele Professional Technical proservice@mieleusa.com Service | Service Technique Phone | Tél. : 1-888-325-3957 serviceprofessional@miele.ca Manufacturer | Fabricant : Miele & Cie. KG Carl-Miele-Straße 29, 33332 Gütersloh, Germany | Allemagne Alteration rights reserved / Publication date: 02.24 M.-Nr. 11 786 011 / 00...