Advertisement
Quick Links
Important Safety Instructions
This chapter provides important safety instructions for
the prevention of injury to users of this machine and
others, and damage to property. Read this chapter
before using the machine and follow the instructions to
ensure that you use the machine properly. The Canon
online manual site (https://oip.manual.canon/) also
provides information on this machine. Read this
information also to ensure correct use.
Do not perform any operations not described in this
manual. Canon will not be responsible for any damages
resulting from operations not described in this manual,
improper use, or repairs or modifications not performed
by Canon or a third party authorized by Canon.
Unless otherwise stated, the illustrations used in this
manual are for the imageRUNNER ADVANCE DX C3935i
with the following optional equipment attached:
• Single Pass DADF-C
• Inner 2way Tray-M
• Cassette Feeding Unit-AW
WARNING
Indicates a warning concerning operations that
may lead to death or serious personal injury if not
performed correctly. To ensure that you use the
machine safely, always observe these warnings.
CAUTION
Indicates a precaution for preventing the risk of
personal injury or property damage other than
a product fault due to improper use of the
machine. To ensure that you use the machine
safely, always observe these cautions.
IMPORTANT
Indicates important operational requirements
and restrictions that should always be observed
when using this machine. Always observe these
important items to avoid malfunctions, faults or
property damage due to improper machine
operation.
Safety-related Symbols
The following symbols are used on this product:
Power switch (On)
Power switch (Off )
Power switch (Stand-by)
Push-button switch (On
/Off
Protective earthing terminal
Electric shock warning: Hazardous voltage inside.
Do not remove the cover.
High temperature warning. Do not touch.
Class II equipment
Contains moving parts. Keep hands and other
body parts away from moving parts.
Electric shock warning: Unplug all power cords
from the power outlet.
Sharp edges. Keep hands and other body parts
away from sharp edges.
NOTE
Some models may use other symbols not listed here.
Installation
To ensure that you use this machine safely read the
following precautions carefully before installing the
machine in a suitable location.
WARNING
Do not install in the locations listed below
Doing so may result in a fire or electric shock.
• Locations that risk blocking the ventilation slots (too
close to walls or curtains or on materials such as
deep-pile carpets)
• Damp or dusty locations
• Near heating appliances or open flames
• Near alcohol, paint thinners or other flammable
substances
Do not use a wireless LAN close to medical equipment
(only for products with a wireless LAN function)
Radio waves can interfere with medical equipment and
cause malfunctions that may lead to accidents.
CAUTION
Do not install in the locations listed below
Doing so could result in a fault or adversely affect people
or other equipment.
• Outdoors or in locations exposed to direct sunlight
• Locations subject to temperature and humidity
extremes, whether low or high
• Locations subject to dramatic changes in
temperature or humidity
• Near equipment that generates magnetic or
electromagnetic waves
• Near electronic devices or precision equipment, such
as TVs, radios and computers
• Laboratories or other locations where chemical
reactions occur
• Locations heavily exposed to aerosol sprays,
ammonia or other corrosive gases
• Locations subject to instability or vibration
• Surfaces that may warp under the weight of the
machine or into which the machine is liable to sink
(carpets, straw matting, beds, etc.)
• Locations where air ventilated from the machine
)
directly impacts people
Provide adequate ventilation during use
This machine generates small amounts of ozone and
other emissions during normal use. These amounts are
too low to be harmful to humans. However, poorly
ventilated rooms should be adequately ventilated
during extended use or long print runs.
Do not remove the leveling feet after installation
(only for products with leveling feet)
Doing so may cause the machine to move or tip over,
resulting in injury.
IMPORTANT
When using a wireless LAN (only for products with a
wireless LAN function)
• Install the machine no more than 50 meters from the
wireless LAN router.
• As much as possible, install in a location where
communication is not blocked by intervening
objects. The signal may be degraded when passing
through walls or floors.
• Install the machine as far as possible from digital
cordless phones, microwave ovens or other
equipment that emits radio waves.
Connecting the telephone line (only for machines
that support faxes)
In certain circumstances, this machine may not be able
to communicate via some telephone lines or in some
regions. One such example is when the total resistance
of the telephone line and the machine exceeds 1700Ω.
In this event, contact your dealer or service
representative.
• This machine conforms to an analog telephone line
standard and can only be connected to ordinary
subscriber telephone lines. Connecting the machine
to a business line or other dedicated line may result
in faults. Always check the line before connecting.
Avoid installing the machine on a sheet or the like
made of material with low thermal resistance.
• This machine includes a built-in paper drawer heater.
Installing the machine without optional products
installed on surfaces with low resistance to heat,
such as a plastic desk mat, may result in heat-
induced degradation of the desk mat.
About cables
• Use a modular cable that is shorter than 3 meters.
• Use a USB cable that is shorter than 3 meters.
Power Supply
WARNING
Using the power plug and cord correctly
Improper use may result in a fire or electric shock.
• Check that the power supply used for the machine is
safe and has a stable voltage.
• Use only a power supply that meets the specified
voltage requirements.
• Connect the machine to a securely grounded power
outlet using the power cord provided.
• Do not use power cords other than the cord provided.
• The power cord provided should only be used with
this machine.
• If you plug this machine into a power outlet with
multiple sockets, do not use the remaining sockets
to connect other devices.
• Do not use extension cords.
• Run the power cord so as to avoid any risk of tripping
over the cord.
• Do not modify, pull, unduly bend or otherwise
damage the power cord.
Advertisement
Related Manuals for Canon imageRUNNER ADVANCE DX C3935i
Summary of Contents for Canon imageRUNNER ADVANCE DX C3935i
- Page 1 LAN function) ensure that you use the machine properly. The Canon To ensure that you use this machine safely read the • Install the machine no more than 50 meters from the online manual site (https://oip.manual.canon/) also...
- Page 2 Observe the following absolutely necessary. Improper handling may lead to a fire, electric shock or Contact Canon when moving the machine burns. • If the machine makes an unusual noise, emits an To move the machine, always contact your dealer or unusual smell, emits smoke or excessive heat, or if service representative beforehand.
- Page 3 • Passports change without notice. • This product is confirmed as a Class 1 laser product • CANON INC. MAKES NO WARRANTY OF ANY KIND • Postage Stamps (canceled or uncanceled) as defined in IEC60825-1:2014 and EN60825-1:2014. • Immigration Papers...
- Page 4 By using the PRODUCT, you shall be deemed to have agreed to all applicable license conditions. If you do not agree to these license conditions, please contact your service representative. V_221018 FT6-3108 (000) XXXXXXXXXX Copyright CANON INC. 2023 PRINTED IN THAILAND...