Page 2
DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed. • Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if transported horizontally. •...
Make sure that the defrost water pipe at the back of the product is fixed to be used. Do not forget to refit the fuse cover. In the event of losing the fuse the plastic evaporating pan on the top of the compressor, to avoid defrost cover the plug must not be used until a replacement fuse cover has been fitted.
GETTING TO KNOW YOUR COMBI FRIDGE / FREEZER 3. Do not place the appliance near cookers, radiators or in direct sunlight as this will cause your appliance to work harder. If installed next to a source of heat or freezer, maintain the following minimum side clearances: From Cookers 50 mm (2")
Page 5
Remove all loose items and fittings and food, if any, from inside the appliance and door racks. Gently prise off plastic hinge cover of upper door top trim and hinge covers on both sides of front top panel using a small flat-headed screwdriver.
Before you start using the fridge/freezer check that: Do not freeze too large a quantity at any one time. The quality of the food is best preserved when it is frozen right through to the core as quickly as possible.
The fridge compartment defrosts automatically. The defrosting water runs Do not use pointed or sharp edged objects such as knives, forks to remove to the drain tube via a collection container at the back of the appliance (1). the frost.