Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WAV28MX0SA
Summary of Contents for Bosch WAV28MX0SA
- Page 1 Washing machine WAV28MX0SA [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 22 1.1 General information.... 4 9 Programmes ...... 24 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories...... 28 1.4 Safe installation ...... 5 11 Laundry........ 28 1.5 Safe use ........ - Page 3 14 Childproof lock...... 32 14.1 Activating the childproof lock ........ 32 14.2 Deactivating the childproof lock ........ 32 15 Basic settings...... 33 15.1 Overview of basic settings .. 33 15.2 Changing the basic set- tings........ 34 16 Cleaning and servicing ... 34 16.1 Cleaning the drum.... 34 16.2 Cleaning the detergent drawer........
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk. -
Page 10: Preventing Material Damage
en Preventing material damage If the water pressure is too high or 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least ATTENTION! 100 kPa (1 bar) and max. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Reduce the washing temperature for 3 Environmental protec- lightly and normally soiled laundry. tion and saving energy a At lower temperatures, the appli- ance consumes less energy. For light to normal soiling, lower tem- 3.1 Disposing of packaging peratures than indicated on the care label are also sufficient. -
Page 12: Installation And Connection
en Installation and connection Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 28 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance. - Page 13 Installation and connection en ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. power cord or Do not install or operate this appli- ▶ the hoses ance anywhere that is liable to ex- between the wall...
-
Page 14: Connecting The Appliance
en Installation and connection Unscrew and remove all of Put on the 4 cover caps. the screws for the 4 transit bolts using a WAF 13 wrench. Push the 4 cover caps downwards. Remove the power cable from the holder. Note: To install the transport locks to transport the appliance, perform these steps again in the reverse or- Remove the 4 sleeves. - Page 15 Installation and connection en Connect the water inlet hose to a Plastic pipe with Fix and secure tap (26.4 mm = 3/4"). rubber sleeve or the water outlet gully hose with an el- → Page 28. Connecting the appliance to the electricity supply Note: Your electrical domestic install- ation for this appliance must comply Open the water tap carefully and with the local legal provisions and...
-
Page 16: Aligning The Appliance
en Installation and connection Use a WAF 17 wrench to tighten 4.6 Aligning the appliance the lock nuts against the housing In order to reduce noise and vibra- until they are hand-tight. tion and to prevent the appliance from moving, align the appliance cor- rectly. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. 5.2 Detergent drawer Maintenance flap for the drain pump → Page 35 Note: Observe the manufacturer's in-... -
Page 18: Control Panel
en Familiarising yourself with your appliance Measuring aid for liquid deter- gent → "Inserting the measuring aid for liquid detergent", Page 29 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. -
Page 19: Before Using For The First Time
first time en Start the first wash cycle or press first time 6 Before using for the to switch off the appliance. → "Basic operation", Page 29 first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. -
Page 20: Display
en Display 7 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. Programme end → "Buttons", Page 22 time Recommended The maximum load capacity for the selec- load... - Page 21 Display en Display Designation Description End of pro- Programme status gramme Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 32 Blood The stain type is activated.
-
Page 22: Buttons
en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information Start/Reload ¡ Start Start, cancel or pause the pro- gramme. ¡ Cancel ¡ Pause SpeedPerfect ¡ Activate Activate or deactivate a shorter pro- gramme duration. - Page 23 Buttons en Button Selection More information Prewash ¡ Activate Activate or deactivate prewash, e.g. for washing heavily soiled laundry. ¡ Deactivate Extra Rinse ¡ Activate Activate or deactivate an additional rinse cycle. ¡ Deactivate Recommended for particularly sensit- ive skin or in regions with very soft water.
-
Page 24: Programmes
en Programmes 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cottons Wash hard-wearing items made from cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate SpeedPerfect. Programme setting: ¡... - Page 25 Programmes en Programme Description Max. load (kg) Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm Wool Hand- or machine-washable items that are made from wool or contain wool. To prevent the laundry from shrinking, the drum moves the items very gently with long pauses. Use a detergent that is suitable for wool.
- Page 26 en Programmes Programme Description Max. load (kg) Shirts Wash non-iron shirts and blouses made from cot- ton, linen, or synthetic or blended fabrics. Tip: In order to avoid creasing in your laundry, you can activate Reduced Ironing. The laundry is only given a short spin and can be removed while still dripping wet.
-
Page 27: Laundry
Programmes en Programme Description Max. load (kg) Super Quick Wash items made from cotton, or synthetic or blen- 15'/30' ded fabrics. Short programme for small items of lightly soiled laundry. The programme duration is approx. 30 minutes. If you wish to reduce the programme duration to 15 minutes, activate SpeedPerfect. -
Page 28: Preparing The Laundry
en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 50. Order number Water inlet hose exten- Extend the water inlet WMZ2381 sion hose for cold water or AquaStop (approx. -
Page 29: Detergents And Care
Detergents and care products en If required, adjust the programme 12 Detergents and care settings. → "Adjusting the programme set- products tings", Page 29 The manufacturer's instructions for use and dosage can be found on the 13.3 Adjusting the pro- packaging. gramme settings Notes Requirement: A programme has ¡... -
Page 30: For Liquid Detergent
en operation Press down on the insert and re- Slide the measuring aid forwards. move the detergent drawer. Fold the measuring aid down and Insert the measuring aid. click it into place. Insert the detergent drawer. Push in the detergent drawer. 13.6 Use the measuring aid 13.7 Adding detergent and for liquid detergent... -
Page 31: Starting The Programme
operation en 13.8 Starting the programme 13.11 Cancelling the pro- gramme Requirement: A programme is set. → "Setting a programme", Page 29 Press Start/Reload Press Start/Reload Open the door. ▶ a The drum rotates and load detec- The appliance door remains tion takes place. This can take up locked for safety reasons if the to 2 minutes, after which water temperature and water levels are... -
Page 32: Childproof Lock
en Childproof lock Wipe the rubber gasket dry and re- So that the programme currently move any foreign objects. running is not cancelled, the pro- gramme selector must be set to the initial programme. goes out in the display. Leave the appliance door and de- tergent drawer open so that resid- ual water can evaporate. -
Page 33: Basic Settings
Basic settings en 15 Basic settings You can configure the basic settings for your appliance to meet your needs. 15.1 Overview of basic settings Basic setting Programme posi- Value Description tion End signal 0 (off) Set the volume of 1 (quiet) the signal at the 2 (medium) end of the pro- 3 (loud) -
Page 34: Changing The Basic Set- Tings
en Cleaning and servicing 15.2 Changing the basic set- 16 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. ciently for a long time, it is important to clean and maintain it carefully. 16.1 Cleaning the drum CAUTION Risk of injury! -
Page 35: Cleaning The Drain Pump
Cleaning and servicing en Pull out the insert upwards. Clean the opening for the deter- gent drawer. Clean the detergent drawer and in- sert with water and a brush, and Push in the detergent drawer. then dry them. 16.3 Cleaning the drain pump Clean the drain pump regularly, at least once a year, as well as in the event of faults, e.g. - Page 36 en Cleaning and servicing Slide a sufficiently large container CAUTION - Risk of scalding! under the opening. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
- Page 37 Cleaning and servicing en Ensure that both impellers can Cleaning the drain pump turn. Requirement: The drain pump is empty. → Page 35 Since water may remain in the drain pump, unscrew the pump cap carefully. The filter insert in the pump ‒ housing may become stuck due to coarse particles of dirt.
-
Page 38: Cleaning The Intake Opening In The Rubber Gasket
en Cleaning and servicing Insert and close the service flap. Remove any blockages from the intake opening. 16.4 Cleaning the intake Note: Do not use any sharp or poin- opening in the rubber ted objects. gasket Regularly check the intake opening in the rubber gasket for any block- ages and clean the intake opening. -
Page 39: Troubleshooting
Troubleshooting en 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 40 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
- Page 41 Troubleshooting en Fault Cause and troubleshooting "E:30 / -10" and/or If the error message is displayed again, call cus- tomer service. → "Customer Service", Page 50 flashes. The automatic voltage control system detects an un- authorised voltage drop. No remedial action possible. ▶ Note: If the power supply is stable, the programme continues to run as normal.
- Page 42 en Troubleshooting Fault Cause and troubleshooting All other error codes. Malfunction Switch the appliance off and then on again. If the message appears again, disconnect the appli- ance from the power supply for at least 30 seconds by pulling out the plug or by switching off the relev- ant circuit breaker in the fuse box.
- Page 43 Troubleshooting en Fault Cause and troubleshooting The door cannot Select a suitable programme for draining. ▶ be opened. → "Programmes", Page 24 Power failure. Open the door using the emergency release. ▶ → "Emergency release", Page 49 The water is not drain- Drain pipe or water outlet hose is blocked. ing.
- Page 44 en Troubleshooting Fault Cause and troubleshooting Water is not flowing The filters in the water inflow are blocked. in. Detergent is not Clean the filters in the water inflow. ▶ being dispensed. The tap is turned off. Turn on the tap. ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting Vibrations and move- Secure the appliance feet. ▶ ment of the appliance → "Aligning the appliance", Page 16 whilst spinning. Transit bolts have not been removed. → "Removing the transit bolts", Page 13. ▶ Drum rotates, water Load detection is active. does not flow in.
- Page 46 en Troubleshooting Fault Cause and troubleshooting The spin programme Start the Spin programme. ▶ does not start. Rushing, hissing Water is flushed under pressure into the detergent noise. drawer. Not a fault – normal operating noise. ▶ Loud noises during Appliance is not correctly aligned. the spin cycle.
- Page 47 Troubleshooting en Fault Cause and troubleshooting The spin result is not Clean the drain pipe and the water outlet hose. ▶ satisfactory. The laun- Drain pipe or water drain hose is caught or jammed. dry is too wet/too Ensure that the drain pipe and water drain hose are ▶...
- Page 48 en Troubleshooting Fault Cause and troubleshooting Fabric softener re- The use of fabric softener is not supported for the se- mains in the detergent lected programme. drawer. Before washing, check whether the use of fabric ▶ softener is supported for the selected programme. → "Programmes", Page 24 Water is leaking from Dirt on the door or seal causes leaks.
-
Page 49: Emergency Release
Transportation, storage and disposal en 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 35 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 50: Disposing Of Old Appliance
en Customer Service 18.4 Disposing of old appli- 19 Customer Service ance Detailed information on the warranty Valuable raw materials can be re- period and terms of warranty in your used by recycling. country is available from our after- sales service, your retailer or on our WARNING website. -
Page 51: Consumption Values
Consumption values en 20 Consumption values The indicated consumption values are approximate. The values may deviate from the indicated values depending on water pres- sure, water hardness, water inlet temperature, room temperature, type of laun- dry, amount and soiling of laundry, detergent used, fluctuations in the mains voltage and selected settings. - Page 52 en Technical data Appliance depth 106.3 cm Water pressure ¡ Minimum: with door open 100 kPa (1 bar) Weight 72.6 kg ¡ Maximum: Maximum load 9.0 kg 1000 kPa Mains voltage 220-240 V, (10 bar) 60 Hz Length of the wa- 150 cm Minimum in- ter inlet hose stallation protec- Length of the wa- 150 cm tion ter outlet hose...
- Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.