Advertisement
Quick Links
Advertisement
Related Manuals for Pioneer SPH-PF97BT
Summary of Contents for Pioneer SPH-PF97BT
- Page 1 SPH-PF97BT RDS AV RECEIVER Operation Manual...
- Page 2 Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
- Page 3 ■ Other functions................. 56 ■ Appendix ................... 59 - 3 -...
- Page 4 • If you notice smoke, a strange noise or odour from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorised Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
- Page 5 • Please remember to fasten your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled. • Never use headphones while driving. To ensure safe driving WARNING •...
- Page 6 • To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
- Page 7 Protecting the LCD panel and screen • Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures. • When using a mobile phone, keep the aerial of the mobile phone away from the LCD screen to prevent disruption of the video in the form of spots, coloured stripes, etc.
- Page 8 Parts and controls Main unit Touch to display the Apple CarPlay phone screen when Apple CarPlay is activated. Touch to display the phone menu screen when Android Auto or hands-free phoning is activated. Touch to start the searching screen when the device is not connected. Touch to go to the device select screen when the device is already connected.
- Page 9 Basic operation Starting up the unit Start the engine to boot up the system. NOTE From the second time on, the screen shown will differ depending on the previous conditions. Select the language. Touch Select the speaker mode. [Standard Mode] 4-speaker system with front and rear speakers, or a 6-speaker system with front and rear speakers and subwoofers.
- Page 10 The message for the Bluetooth connection appears. Turn on the Bluetooth function on your device to connect your device to this product via Bluetooth. Follow the on-screen instructions to finish the initial setup. TIPS • Select [Skip] to finish the initial setup without connecting the Bluetooth device. You can make the Bluetooth connection later (page 17).
- Page 11 Using the touch panel You can operate this product by touching the keys on the screen directly with your fingers. NOTE To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. Common touch panel keys : Returns to the previous screen.
- Page 12 Operating the time bar 25:00 50:00 You can change the playback point by dragging the key. - 12 -...
- Page 13 Home menu screen 6/10 Abcdefg Bluetooth YouTube Audio Apple CarPlay Android Auto Settings Radio Sources Edit Favourite source/application area Touch to see the selected source/application. Album art The artwork of the audio currently being played is displayed. NOTE The artwork may not be displayed depending on some audio sources. Current time Touch to set the clock display (page 56).
- Page 14 Shortcuts Shortcuts enable you to easily operate frequently used functions on the home menu screen. NOTES • The position of the shortcuts on the home menu screen depends on the driving position setting (page 45). • Some of the shortcut keys become unavailable depending on the source. Abcdefg Powerful Custom1...
- Page 15 Touch to set the equaliser curve to “Flat” (page 51). Touch to display the setting screen. Touch to turn the rear speaker output on or off. Touch to recall the preset channel stored to a key from memory. Touch to adjust the climate setting or various settings such as WebLink® Cast, Source OFF, Subwoofer on/off, or Dimmer on/off.
- Page 16 The clock and the artwork can also be removed from the favourite source/application area. Touch [Done]. Rearranging the icons in the favourite source/application area Touch [Edit]. Drag the icon to the desired position. The clock and the artwork cannot be moved. Touch [Done].
- Page 17 Bluetooth® Bluetooth connection Turn on the Bluetooth function on the device. Display the connected Bluetooth device list screen on the device. Touch Touch [Sources]. Touch Touch [Yes] to start searching. If another device is already connected to the unit, skip this step. Touch a desired device on the screen.
- Page 18 NOTES • If five devices are already paired, the message confirming whether to delete the registered device is displayed. If you want to delete the device, touch [Agree]. If you want to delete other device, touch [Go To DeviceList] and delete the devices manually. •...
- Page 19 using the phone function. If two of the five registered devices are already connected, the first one of the two connected devices will be disconnected when you connect the remaining third device to use the audio function. • The icon for the mobile phone currently being used is displayed on the phone menu screen. If you connect two mobile phones to this product at the same time, you can switch between the mobile phones using the switch devices key.
- Page 20 Receiving a phone call Touch to answer the call. Touch to end the call. TIPS • Touch while getting a call waiting, switch to the talking person. • Touch while getting a call waiting to reject the call. NOTE When two phones are connected at the same time, if an incoming call is received on the second phone while you are talking on the first phone, the dial confirmation screen for the second phone will be displayed.
- Page 21 Adjusting the other party’s listening volume This product can be adjusted to the other party’s listening volume. Touch to switch between the three volume levels. Notes for hands-free phoning ▶General notes • Connection to all mobile phones featuring Bluetooth wireless technology is not guaranteed.
- Page 22 Bluetooth audio Before using the Bluetooth audio player, register and connect the device to this product (page 17). NOTES • Depending on the Bluetooth audio player connected to this product, the available operations with this product may be limited to the following two levels: –...
- Page 23 Skips files forwards or backwards. Sets a repeat play range. Plays files in random order. - 23 -...
- Page 24 Wi-Fi® By connecting your Wi-Fi certified mobile device to this product via Wi-Fi connection, you can use Apple CarPlay or Android Auto wirelessly. Wi-Fi connection See the following chapters for the procedure on how to make a Wi-Fi connection for each application. •...
- Page 25 AV source Supported AV source You can play or use the following sources with this product. • Radio (page 26) The following sources can be played back or used by connecting an auxiliary device. • Apple CarPlay (page 35) • Android Auto (page 38) •...
- Page 26 Radio Starting procedure Touch Touch [Radio]. The Radio screen appears. Basic operation Radio Abcdefghi Abcdefghi Recalls the preset channel stored to a key from memory. XX.XX XX.XX Stores the current broadcast frequency to a key. Selects the FM1, FM2, FM3, AM1 or AM2 band. Performs BSM (best stations memory) function (page 27).
- Page 27 Storing the strongest broadcast frequencies (BSM) The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset channel keys [1] to [6]. NOTES • Storing broadcast frequencies with BSM may replace those you have already saved. •...
- Page 28 Plugging/unplugging a USB storage device You can play compressed audio, compressed video, or still image files stored in an external storage device. Plugging a USB storage device Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable. NOTES •...
- Page 29 You can also start this source by touching [USB] on the source screen. Basic operation Audio source Abcdefghijk Abcdefghi Abcdef 99/99 25:00 50:00 Switches between playback and pause. Skips files forwards or backwards. Performs fast forwards or fast reverse. Sets a repeat play range for all files/the current folder/the current file. Switches between random and normal file playback order.
- Page 30 Video source CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake. Abcdefghijk ROOT 99/99 25:00 50:00 Full Switches between playback and pause. Skips files forwards or backwards.
- Page 31 Still image source Abcdefghijk ROOT 99/99 Normal Switches between playback and pause. Skips files forwards or backwards. Rotates the displayed picture 90° anticlockwise. Sets a repeat play range for all files/the current folder/the current file. Sets the screen mode for the still image (page 57). Selects a file from the list.
- Page 32 • Availability of non-Pioneer content and services, including apps and connectivity, may change or discontinue without notice. • When using WebLink® with the Pioneer product, available content and functions will be limited while driving. • WebLink® allows access to applications other than those listed, subject to limitations while driving.
- Page 33 Touch [WebLink]. NOTE For USB connection, refer to the Quick start guide. For smartphone (Android™) users System requirement For the latest OS support information, please visit HelloWebLink.com. NOTE The video playback capability depends on the connected Android device. Unlock your smartphone and connect it to this product via USB. A screen other than WebLink®...
- Page 34 Using WebLink® Cast You can project your iPhone or smartphone screen onto the screen of this product and operate the projected screen with finger gestures. NOTE The supported finger gestures may vary depending on the WebLink® Cast compatible application. Start WebLink®. Touch Follow the instructions on the display when the message appears on your connected iPhone or smartphone.
- Page 35 • Apple CarPlay allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
- Page 36 Touch [System Settings]. Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Wired connection Connect an Apple CarPlay compatible device to this product via USB. The application screen appears. You can start this source by touching then touching [Apple CarPlay] if a screen other than Apple CarPlay appears after the USB connection.
- Page 37 Touch [Yes] to pair with the device. Perform the pairing operation by operating the device. Touch [Yes] to activate the Apple CarPlay function. Follow the on-screen instructions on the device to start the application. TIPS • When the USB connection with the other device has been made, the message that shows that the new device is available will appear.
- Page 38 • Android Auto allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
- Page 39 Touch Touch [System Settings]. Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Wired connection Connect an Android Auto compatible device to this product via USB. The application screen appears. You can start this source by touching then touching [Android Auto] if a screen other than Android Auto appears after the USB connection.
- Page 40 Perform the pairing operation by operating the device. Touch [Start] to start Android Auto. The unit configures the connection then starts the application. You can use the voice recognition function by touching the button once Android Auto is activated. NOTES • For details on USB connection, refer to the Quick start guide. •...
- Page 41 You can display the video image output by the device connected to video input. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake. NOTE A Mini-jack AV cable (sold separately) is required for connection.
- Page 42 Camera View You can display the video image output by the device connected to video or camera input. For details, refer to the Quick start guide. Starting procedure Touch Touch [Sources] then swipe left on the screen. Touch [Camera View] for connected camera view. The video image is displayed on the screen.
- Page 43 Vehicle equipment information Using the Vehicle Bus adapter By connecting the Vehicle Bus adapter (sold separately), you can display the operation status such as gauges, vehicle information, climate control and parking assist. Important • For information on installing the Vehicle Bus adapter, see the operating manual of the Vehicle Bus adapter.
- Page 44 Settings You can adjust various settings in the main menu. Displaying the setting screen Touch Touch Touch one of the following categories, then select the options. System Settings (page 44) Display Settings (page 48) Audio & EQ Settings (page 49) Wi-Fi Settings (page 24) Bluetooth Settings (page 18) Camera settings (page 52)
- Page 45 • Depending on your vehicle, this function may not work properly. In this case, contact your dealer or an authorised PIONEER Service Station. • Please use a PIONEER wiring harness for each vehicle model when [With Adapter] mode is engaged, otherwise select [W/o Adapter].
- Page 46 Menu Item Description [Picture Adjustment] You can adjust the picture for each source, rear view camera. To adjust following menu, touch to adjust. CAUTION For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the handbrake.
- Page 47 Menu Item Description [Connection Status] Check that the leads are properly connected between this product and vehicle. [GPS Antenna] Displays the connection status of the GPS aerial ([OK] or [NOK]) and the reception sensitivity. NOTE If reception is poor, change the installation position of the GPS aerial.
- Page 48 Menu Item Description [Firmware Update] Updating the firmware version. CAUTION • The USB storage device for updating must contain only the correct update file. • Never turn this product off, disconnect the USB storage device while the firmware is being updated. •...
- Page 49 Menu Item Description Preset Display Select the desired preset background display. You can set your favourite screen from the connected USB device by touching and sliding the bottom of screen to the right. Select the background display image of the connected USB storage device.
- Page 50 Menu Item Description [Loudness] Compensates for deficiencies in the low-frequency and [Off] [Low] [Mid] [High] high-frequency ranges at low volume. [Speaker Level] Adjust the speaker output level of the listening position. Listening Position*1*2 Touch to select the listening position then select the output speaker.
- Page 51 Menu Item Description [EQ] Select or customise the equaliser curve. [Super Bass] [Powerful] Select a curve that you want to use as the basis of [Natural] [Vocal] [Flat] customising then touch the frequency that you want to [Custom1] [Custom2] adjust. TIPS •...
- Page 52 – The key to switch the parking assist guidelines on or off CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. • Immediately verify whether the display changes to the rear view camera image when the gear stick is moved to REVERSE (R) from another position.
- Page 53 Menu Item Description [Parking Assist Guide] You can set whether to display the parking assist [On] [Off] guidelines on the rear view camera images when backing up your vehicle. NOTE When [2nd Camera Input] is selected for [Rear Viewing Camera Input], this setting cannot be adjusted.
- Page 54 Menu Item Description [Parking Assist Guide Adjusting the guidelines by dragging or touching Adjust] on the screen. Touch [OK] to finish the settings. Touch [Reset] to reset the settings. CAUTION • When adjusting the guidelines, be sure to park the vehicle in a safe place and apply the handbrake.
- Page 55 Menu Item Description [2nd Camera view] Select the way the screen image of a camera appears. [Normal] [Reverse] Phone Connectivity Settings Menu Item Description [Android Auto] Setting Android Auto activation. [On] [Off] NOTE The [Android Auto] icon may not be displayed on the home menu screen depending on the Phone Connectivity Settings.
- Page 56 Other functions Setting the clock display You can set the time format, time zone, daylight saving and the date format. However, the time and date are automatically adjusted by the GPS aerial and cannot be adjusted by the user. Touch the current time on the screen. Set the following items in the settings.
- Page 57 Changing the widescreen mode You can set the screen mode for the AV screen and image files. Touch the screen display mode key. Full Screen display mode key Touch the desired mode. [Full] Displays images across the entire screen. NOTE Some images may not be displayed across the entire screen.
- Page 58 About the reconnection function You can reconnect the iPhone or smartphone by touching [Reconnect] on the home menu screen. TIPS • [Reconnect] is displayed on the home menu screen only when the Wi-Fi connection (Wireless Apple CarPlay or Android Auto) has failed or been disconnected automatically. •...
- Page 59 The audio output direction may switch action, please contact your dealer or automatically when the Bluetooth and an authorised Pioneer Service Station. USB connections are used at the same time. Problems with the AV screen –...
- Page 60 If the error persists, – Perform the connection process. record the error message and contact your dealer or your nearest Pioneer service centre. Problems with Application screen USB storage device A black screen is displayed.
- Page 61 – Check that the files in the USB storage Connection failed. Please check your device are compatible with this phone to confirm connection. product. Wi-Fi connection failed and Security for the connected USB storage Android Auto app did not start. device is enabled.
- Page 62 Detailed information Phone book access is not authorized The Bluetooth PBAP of the mobile for playable media phone is not connected and the phone book cannot be downloaded. – Make a PBAP connection. You need to operate your phone and allow the unit Compatibility to access the contact information on your phone.
- Page 63 • There may be a slight delay when starting SAMPLING FREQUENCY 8 kHz to 48 kHz playback of audio files encoded with TRANSMISSION RATE CBR (8 kbps to image data. 320 kbps)/VBR • Some USB storage devices connected to WAV compatibility this product may generate noise on the radio.
- Page 64 • The maximum resolution depends on the Bluetooth SIG, Inc. and any use of such compatible video codec. marks by Pioneer Corporation is under H.264 video decoding format license. Other trademarks and trade names are those of their respective Base Line Profile, Main Profile, High Profile owners.
- Page 65 Android Auto are trademarks of Google LLC. • THIS SOFTWARE IS PROVIDED BY THE • Pioneer accepts no responsibility for data COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY lost from an iPhone, even if that data is EXPRESS OR IMPLIED WARRANTIES, lost while using this product.
- Page 66 • LTE is a trademark of ETSI. changes to or discontinuation of the connected Content application(s) or Using app-based service by its provider. • Pioneer is not liable for any issues that connected content may arise from incorrect or flawed app- based content. Important •...
- Page 67 • WebLink®, Apple CarPlay and • Never touch the LCD screen with Android Auto allow access to anything besides your finger when applications other than those listed operating the touch panel functions. The (subject to limitations while driving), but LCD screen can scratch easily. the extent to which content can be used is determined by the App providers.
- Page 68 • If the LED backlight reaches the end of its product lifetime, the screen will become dimmer and the image will no longer be visible. In that case, please consult your dealer or the nearest authorised Pioneer Service Station. - 68 -...
- Page 69 Specifications General Rated power source: 14.4 V DC (10.5 V to 16.0 V allowable) Earthing system: Negative type Maximum current consumption: 10.0 A Dimensions (W × H × D): Chassis: 188 mm × 108 mm × 37 mm Nose: 229 mm × 131 mm × 13 mm Weight: 0.9 kg Display...
- Page 70 Slope: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 dB/oct LPF (Subwoofer): ON/OFF Frequency: 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Hz Slope: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 dB/oct, -30 dB/oct, -36 dB/oct Phase: Normal/Reverse Time alignment: 0 to 490 cm (1.4 cm/step) Speaker level:...
- Page 71 USB Class: MSC (Mass Storage Class) File system: FAT16, FAT32, NTFS <USB audio> MP3 decoding format: MPEG-1 & 2 & 2.5 Audio Layer 3 WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2 (2 ch audio) (Windows Media™ Player) AAC decoding format: MPEG-4 AAC (iTunes encoded only) (Ver.
- Page 72 <USB video> : Supported : Not supported Playable video format (container) QuickTime MPEG1-PS TS Stream (MOV) MPEG2-PS .mpg/ .ts/.m2ts/ .avi mp4/.m4v .mov .wmv .mkv .flv EXTENSION .mpeg .mts H.264 H.263 WMV9 (VC-1) Video codec MPEG-4 MPEG-2 MPEG-1 Audio codec FLAC LPCM Bluetooth Version:...
- Page 73 Signal-to-noise ratio: 50 dB (IEC-A network) AM tuner Frequency range: 530 kHz to 1 640 kHz (10 kHz), 531 kHz to 1 602 kHz (9 kHz) Usable sensitivity: 28 μV (S/N: 20 dB) Signal-to-noise ratio: 45 dB (IEC-A network) Wi-Fi Version: IEEE 802.11 a/n/ac (5 GHz) Frequency channel:...
- Page 74 © 2024 PIONEER CORPORATION <OPM_SPHPF97BTEW_EG_A> EW <KMTZ24I>...