hit counter script
Sony CFD-S03CP Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. CD Player
  5. CFD CFD-S03CP
  6. Service manual

Sony CFD-S03CP Service Manual

Service manual
Hide thumbs Also See for CFD-S03CP:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions
CFD-S03CP/S03CPL
SERVICE MANUAL
Ver. 1.3 2006.04
CD player section
System
Compact disc digital audio system
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on the
optical pick-up block with 7 mm aperture.)
Number of channels
2
Frequency response
20 - 20 000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM: 87.5 - 108 MHz
CND, E92, MX model:
AM: 530 - 1 710 kHz
TW model:
AM: 531 - 1 611 kHz
EXCEPT CND, E92, MX, TW model:
AM/MW: 531 - 1 611 kHz (9 kHz step)
530 - 1 610 kHz (10 kHz step)
CFD-S03CPL:
LW: 153 - 279 kHz
IF
FM: 10.7 MHz
AM/MW/LW: 450 kHz
Antennas
FM: Telescopic antenna
AM/MW/LW: Built-in ferrite bar antenna
Sony Corporation
9-887-043-04
Personal Audio Division
2006D04-1
Published by Sony Techno Create Corporation
© 2006.04
Photo: CFD-S03CP
Model Name Using Similar Mechanism CFD-S01
CD
CD Mechanism Type
Section
Optical Pick-up Name
Model Name Using Similar Mechanism CFD-S01
TC
Section Tape Transport Mechanism Type
SPECIFICATIONS
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 150 s (sec.) with Sony cassette C-60
Frequency response
TYPE I (normal): 80 - 10 000 Hz
General
Speaker
Full range: 8 cm dia., 4 Ω, cone type (2)
Outputs
Headphones jack (stereo minijack):
For 16 - 32 Ω impedance headphones
Power output
1.7 W + 1.7 W (at 4 Ω, 10% harmonic distortion)
Power requirements
For CD radio cassette-corder:
120 V AC, 60 Hz (CND, E92, MX, TW model)
220 V AC, 60 Hz (KR model)
220 – 230 V AC, 50 Hz (AR model)
230 V AC, 50 Hz (EXCEPT E92, KR, MX, AR, TW model)
9 V DC, 6 R14 (size C) batteries
For remote control:
3 V DC, 2 R03 (size AAA) batteries
CD RADIO CASSETTE-CORDER
Canadian Model
CFD-S03CP
AEP Model
CFD-S03CP/S03CPL
UK Model
E Model
Australian Model
CFD-S03CP
KSM-213CDP
KSS-213C
MF-S01
– Continued on next page –

Advertisement

Table of Contents
loading

Related Manuals for Sony CFD-S03CP

Summary of Contents for Sony CFD-S03CP

  • Page 1 AM: 530 - 1 710 kHz 220 – 230 V AC, 50 Hz (AR model) TW model: 230 V AC, 50 Hz (EXCEPT E92, KR, MX, AR, TW model) AM: 531 - 1 611 kHz 9 V DC, 6 R14 (size C) batteries...
  • Page 2 : Taiwan model NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick- up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens.

  • Page 3: Table Of Contents

    3-3. Main Board ..............8 ordinary solder. 3-4. CD Block Assy ..............8 Ordinary soldering irons can be used but the iron tip has to be 3-5. BD83S Board ..............9 applied to the solder joint for a slightly longer time.

  • Page 4: Servicing Notes

    LASER DIODE AND FOCUS SEARCH OPERATION CHUCK PLATE JIG ON REPAIRING CHECK On repairing CD section, playing a disc without the lid (CD), use 1. Turn ON the [OPERATE] button and press [CD] button to CD Chuck Plate Jig. position.

  • Page 5: General

    • The characters A - Z, 0 - 9, and _ can be displayed on this player. Other characters are displayed as “_”. • This player conforms to Version 1.0, 1.1, 2.2, 2.3 and 2.4 of the Tips ID3 tag format.

  • Page 6: Disassembly

    CFD-S03CP/S03CPL SECTION 3 DISASSEMBLY Note: This set can be disassemble according to the following sequence. 3-1. CABINET (REAR) ASSY (Page 7) 3-2. CABINET (FRONT) ASSY, 3-12. POWER BOARD CABINET (UPPER) ASSY (Page 12) (Page 7) 3-3. MAIN BOARD 3-9. TAPE MECHANISM BLOCK, 3-11.

  • Page 7: Cabinet (Rear) Assy

    CFD-S03CP/S03CPL Note: Follow the disassembly procedure in the numerical order given. 3-1. CABINET (REAR) ASSY 2 screw (+BV tapping B2.6) 1 two screws telescopic antenna (+BV tapping (B2.6)) 4 three screws (+BV tapping (B2.6)) handle 3 screw (+BV tapping B2.6)

  • Page 8: Main Board

    CFD-S03CP/S03CPL 3-3. MAIN BOARD 9 flexible flat cable(23 core) (CN805) 1 CN306 (4P) 4 connector (S801) 3 flexible flat cable(20 core) (CN803) 0 MAIN board 7 two screws (+BV tapping B2.6) 5 two screws (+BV tapping B2.6) 2 flexible flat cable(20 core)

  • Page 9: Bd83S Board

    CFD-S03CP/S03CPL 3-5. BD83S BOARD 4 Remove the two solders. 5 BD83S board 1 flexible flat cable(16 core) (CN301) 3 Remove the two solders. 2 screw (+BVTT 2 × 6) 3-6. OPTICAL PICK-UP 5 optical pick-up 1 gear (A) claw 2 claw...

  • Page 10: Panel Board

    CFD-S03CP/S03CPL 3-7. PANEL BOARD 3 PANEL board 2 five screws (+P tapping (B2.6)) 1 four screws (+P tapping (B2.6)) 3-8. CD LID 5 CD lid 6 CD spring...

  • Page 11: Tape Mechanism Block, Belt (1), Belt (2)

    CFD-S03CP/S03CPL 3-9. TAPE MECHANISM BLOCK, BELT (1), BELT (2) 6 belt (1) 5 motor bracket 7 belt (2) 1 two screws (+BV tapping (B2.6)) 4 two screws 3 tape mechanism block 2 two screws (+BV tapping (B2.6)) 3-10. TC BOARD 2 Remove the four solders.

  • Page 12: Key-1 Board, Key-2 Board

    CFD-S03CP/S03CPL 3-11. KEY-1 BOARD, KEY-2 BOARD 9 button (FUNC) 6 three screws (+BV tapping (B2.6)) 8 KEY-1 board 7 HOLDER board 2 two screws (+BV tapping (B2.6)) 3 two HOLDER boards 5 button (volume) 1 flexible flat cable(4 core) (CN421) 4 KEY-2 board 3-12.

  • Page 13: Mechanical Adjustments

    Meter reading 2,910 to 3,090 Hz more than 100 g CQ-403A Adjust so that the frequency at the beginning and that at the end of (more than 3.53 oz) tape winding are between 2,910 to 3,090 Hz. Adjustment Location: Tape speed adjustment...

  • Page 14: Tuner Section

    1,400 kHz TP (GND) FM IF ADJUSTMENT Adjust for a minimum reading on level meter • Repeat the procedures in each adjustment several times, and the 10.7 MHz tracking adjustments should be finally done by the trimmer capacitors. FM FREQUENCY COVERAGE ADJUSTMENT •...
  • Page 15 CFD-S03CP/S03CPL Adjustment Location: L2: FM FREQUENCY COVERAGE CT1: FM TRACKING ADJUSTMENT ADJUSTMENT L3: AM (MW/LW) – MAIN BOARD (Component Side) – FREQUENCY COVERAGE ADJUSTMENT CT5: LW TRACKING ADJUSTMENT ANT1 ANT1-1: MW TRACKING ADJUSTMENT ANT1-2: LW TRACKING ADJUSTMENT CT3: MW TRACKING...

  • Page 16: Cd Section

    In case of operation check, confirm that focus bias. Test Point: FOCUS BIAS CHECK 1. Connect the oscilloscope between IC201 pin u; and pin th (or – BD83S BOARD (Conductor Side) – TP (RFAC0) and TP (VC)). 2. Insert the disc (PATD-012 (Tr 15)). (Part No. : 4-225-203-01) 3.

  • Page 17: Diagrams

    CFD-S03CP/S03CPL SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM — CD SECTION — AOUT1 CD_IN_ L SYNCHRONOUS (Page 18) CIRCUIT AOUT2 CD_IN_R PRI- SERVO RF AMP, SYSTEM SERVO PROCESSOR, DIGITAL SIGNAL PROCESSOR IC201 DIGITAL SERVO LD POWER CONTROL CONTROLLER Q321 VDD (3.3V)

  • Page 18: Block Diagram - Main Section

    CFD-S03CP/S03CPL Ver. 1.1 6-2. BLOCK DIAGRAM — MAIN SECTION — IC302 R.RO ELECTRONIC VOLUME R.IN R.LIN POWER AMP REC/PB CD_IN_R IC303 PRE AMP R-CH (Page 17) L.RO IC301 VOL AMP J321 ALC 2 L-IN L-OUT L.LIN L.LO CD_IN_L HRP301 RECORD/PLAYBACK HEAD L.IN...

  • Page 19: Circuit Boards Location

    6-3. CIRCUIT BOARDS LOCATION • NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) POWER board For schematic diagrams.

  • Page 20: Printed Wiring Board - Bd83S Section

    CFD-S03CP/S03CPL 6-4. PRINTED WIRING BOARD — BD83S SECTION — • Refer to page 19 for Circuit Boards Location. : Uses unleaded solder. (Page 22) MAIN BOARD CN805 IC202 IC201 OPTICAL PICK-UP BLOCK (KSS-213C) 1-868-067- (11) 1-868-067- (11) CFD-S03CP/S03CPL...

  • Page 21: Schematic Diagram - Bd83S Section

    CFD-S03CP/S03CPL 6-5. SCHEMATIC DIAGRAM — BD83S SECTION — • Refer to page 19 for Waveforms. • Refer to page 32 for IC Block Diagram. • Refer to page 34 for IC Pin Description of IC201. C210 CN301 C301 R260 R257...

  • Page 22: Printed Wiring Board - Main Section

    CFD-S03CP/S03CPL Ver. 1.2 6-6. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 19 for Circuit Boards Location. : Uses unleaded solder. (Page 30) (Page 26) ANT2 POWER BOARD HP BOARD FM TERESCOPIC CN901 CN307 ANTENNA JW167 JW232...

  • Page 23: Schematic Diagram - Main Section (1/3)

    CFD-S03CP/S03CPL Ver. 1.2 6-7. SCHEMATIC DIAGRAM — MAIN SECTION (1/3) — • Refer to page 19 for Waveforms. • Refer to page 32 for IC Block Diagram. (CND,E92,MX) (CND,E92,MX) (EXCEPT CND,E92,MX) (EXCEPT CND,E92,MX) IC B/D ANT1 ANT2 (Page 24) CND,E92,MX MODEL...

  • Page 24: Schematic Diagram - Main Section (2/3)

    CFD-S03CP/S03CPL Ver. 1.2 6-8. SCHEMATIC DIAGRAM — MAIN SECTION (2/3) — • Refer to page 19 for Waveforms. • Refer to page 37 for IC Pin Description of IC801. CN807 CN804 R870 R817 C456 R818 R819 IC802 C455 R869 Q451...

  • Page 25: Schematic Diagram - Main Section (3/3)

    CFD-S03CP/S03CPL 6-9. SCHEMATIC DIAGRAM — MAIN SECTION (3/3) — • Refer to page 32 for IC Block Diagrams. D323 C323 R323 R324 C324 R245 R145 C113 C115 R134 C129 C132 C130 R140 C110 R135 R136 C216 C116 C355 R138 R142...

  • Page 26: Printed Wiring Boards - Tc Section

    CFD-S03CP/S03CPL 6-10. PRINTED WIRING BOARDS — TC SECTION — • Refer to page 19 for Circuit Boards Location. : Uses unleaded solder. CN308 CN307 SP201 SPEAKER (R-CH) MAIN BOARD CN306 SP101 (Page 22) JW322 SPEAKER R108 (L-CH) R110 JW321 J321...

  • Page 27: Schematic Diagram - Tc Section

    CFD-S03CP/S03CPL Ver. 1.2 6-11. SCHEMATIC DIAGRAM — TC SECTION — • Refer to page 19 for Waveforms. • Refer to page 33 for IC Block Diagram. IC B/D (AEP,UK,CET,KR,IT) IC301 (CND,E41,E92,AUS,MX,SP,AR,TH,TW) C102 R102 R108 R103 R112 R104 R109 C301 C104...

  • Page 28: Printed Wiring Boards - Panel Section

    CFD-S03CP/S03CPL Ver. 1.1 6-12. PRINTED WIRING BOARDS — PANEL SECTION — • Refer to page 19 for Circuit Boards Location. : Uses unleaded solder. (Page 22) (Page 22) MAIN BOARD MAIN BOARD CN804 CN803 IC401 S417 S407 IC401 CN403 C401...

  • Page 29: Schematic Diagram - Panel Section

    CFD-S03CP/S03CPL Ver. 1.1 6-13. SCHEMATIC DIAGRAM — PANEL SECTION — R401 R402 R403 R404 R405 R406 R407 R408 R409 S401 S402 S403 S404 S405 S406 S407 (EXCEPT AEP,UK,CET,IT) OPERATE (AEP,UK,CET,IT) S413 S414 S415 S416 S417 FFC412 CN421 R411 R412 R413...

  • Page 30: Printed Wiring Boards - Power Supply Section

    CFD-S03CP/S03CPL 6-14. PRINTED WIRING BOARDS — POWER SUPPLY SECTION — • Refer to page 19 for Circuit Boards Location. : Uses unleaded solder. T901 FH901 FH902 F902 D903 C903 D901 (11) 1-869-167- JW908 C901 D902 CN903 MAIN BOARD C902 D904...

  • Page 31: Schematic Diagram - Power Supply Section

    CFD-S03CP/S03CPL 6-15. SCHEMATIC DIAGRAM — POWER SUPPLY SECTION — CN902 CN903 C901 D901 D902 C902 CN901 T901 C903 F902 D903 J901 C906 D904 FH901 FH902 (Page 25) C904 CFD-S03CP/S03CPL...
  • Page 32 CFD-S03CP/S03CPL • IC BLOCK DIAGRAMS IC402 BA5947FM-E2 (BD83S Board) IC1 LV23003VA (MAIN Board (1/3)) AM RF-IN 36 FM RF-IN MUTING 35 GND2 34 FM RF-OUT 33 VCC2 FM-MIX 32 FM OSC + – GND1 INTERFACE AM MIX-OUT 31 AM OSC...
  • Page 33 CFD-S03CP/S03CPL IC302 PT2257-S (MAIN Board (3/3)) L-IN L-OUT VR 2 VOL AMP 2 VREF LOGIC CONTROL VOL AMP 1 REF AMP VR 1 R-IN R-OUT DATA IC301 TA2068N (TC Board) LINE L.LIN L.PO MIC I/EX AMP1 BUF AMP TAPE L.NF RADIO L.RAD...
  • Page 34 CFD-S03CP/S03CPL • IC PIN DESCRIPTIONS • IC201 CXD3014A-201R (RF AMP, SYSTEM SERVO PROCESSOR, DIGITAL SIGNAL PROCESSOR) (BD83S BOARD) Pin No. Pin Name Pin Description LRCK L/R sampling clock signal output terminal LRCKI L/R sampling clock signal input terminal PCMD Serial data output terminal...
  • Page 35 RFAC summing amplifier signal output terminal EQ_IN RF equalizer circuit input terminal Laser diode on/off control signal output to the automatic power control circuit “L”: laser off, “H”: laser on Light amount monitor input from the optical pick-up block laser diode...
  • Page 36 — Power supply terminal (+1.8V) PLLVSS — Ground terminal XVSS — Ground terminal XTAO System clock output terminal (16.9344 MHz) XTAI System clock input terminal (16.9344 MHz) XVDD — Power supply terminal (+1.8V) AVDD1 — Power supply terminal (+3.3V) AOUT1...
  • Page 37 CFD-S03CP/S03CPL • IC801 MB90802NPF-G-109E1 (SYSTEM CONTROL) (MAIN BOARD (2/3)) Pin No. Pin Name Pin Description O-POWER System power control output H: Power ON FM/AM SHIFT system clock shift control signal output A-MUTE A-mute signal output H: mute on CD-XRST CD reset signal output...
  • Page 38 ISS control signal output Operation mode setting pin Operation mode setting pin Operation mode setting pin RESET System reset signal input CD-ON Audio CD mode control signal output TU-ON — Not used (Open) TAPE Audio tape mode control signal output VLCD —...

  • Page 39: Exploded Views

    EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Accessories are given in the last of this parts list. The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. •...

  • Page 40: Front Cabinet Section (1)

    Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-252-827-01 SCREW (B2.6), (+) BV TAPPING 2-654-044-01 BUTTON (FF) (LIGHT GRAY)...(GRAY,SILVER) 2-655-159-01 JOINT, CABINET (CND,E41,E92,AUS,KR,MX,SP,AR,TH,TW,CET) 3-047-468-01 DAMPER 2-654-044-11 BUTTON (FF) (GRAY)...(SILVER) 2-654-071-01 SPRING, CASSETTE (AEP,UK,CET,IT) X-2103-302-2 HOLDER SUB ASSY, CASSETTE 2-654-042-01 BUTTON (PLAY) (LIGHT GRAY)...(GRAY,SILVER)

  • Page 41: Front Cabinet Section (2)

    Remark A-1157-000-A KEY-1 BOARD, COMPLETE X-2102-579-1 CABINET (FRONT) SUB ASSY 3-831-441-99 SHEET (1) (GUNMETALLIC)...(GRAY) (CND) 1-831-616-11 CABLE, FLEXIBLE FLAT (4 CORE) X-2103-199-1 CABINET (FRONT) SUB ASSY 1-831-613-11 CABLE, FLEXIBLE FLAT (4 CORE) (SILVER)...(SILVER) (AEP,UK,CET,IT) 2-654-050-01 BUTTON (FUNC) X-2103-301-1 CABINET (FRONT) SUB ASSY (GUNMETALLIC)...(GRAY) (E41,E92,MX,AR)

  • Page 42: Upper Cabinet Section (1)

    A-1157-386-A MAIN BOARD, COMPLETE (UK,CET,IT) 1-452-899-11 MAGNET A-1157-391-A MAIN BOARD, COMPLETE (AEP) 3-019-395-01 PLATE, CHUCKING A-1157-967-A MAIN BOARD, COMPLETE (AUS,KR,TW) 3-253-143-01 SCREW (B2.6), (+) P TAPPING A-1157-973-A MAIN BOARD, COMPLETE (AR) 2-654-056-01 HANDLE (BLUE)...(GRAY,SILVER) 1-832-008-11 CABLE, FLEXIBLE FLAT (14 CORE) (CND.E41,E92,AUS,KR,MX,SP,AR,TH,TW,CET) 3-923-151-01 CUSHION, RUBBER 2-654-056-11 HANDLE (GRAY)...(SILVER) (AEP,UK,CET,IT)

  • Page 43: Upper Cabinet Section (2)

    A-1154-900-A HEADPHONE BOARD, COMPLETE 3-931-379-21 RUBBER, VIBRATION PROOF (RED) X-2103-303-2 CABINET (UPPER) SUB ASSY 3-931-379-31 RUBBER, VIBRATION PROOF (GREEN) (BLUE)...(GRAY,SILVER) 1-827-992-11 WIRE (FLAT TYPE) (16 CORE) (CND,E41,E92,AUS,KR,MX,SP,AR,TH,TW,CET) 1-831-973-11 CABLE, FLEXIBLE FLAT (23 CORE) X-2103-332-2 CABINET (UPPER) SUB ASSY (GRAY)...(SILVER) (AEP,UK,CET,IT)

  • Page 44: Cd Mechanism Section

    Ref. No. Part No. Description Remark 2-626-907-11 GEAR (A) X-2162-709-2 CHASSIS ASSY (CDP), MOTOR (SPINDLE) 2-627-003-01 GEAR (B) (RP) (including M701) 2-174-500-01 SCREW (2X3) 0 256 8-848-483-12 OPTICAL PICK-UP (KSS-213C/C2RP) 2-626-908-01 SHAFT, SLED M702 X-2625-769-1 GEAR ASSY (MB) (RP), MOTOR (SLED)

  • Page 45: Electrical Parts List

    In each case, u : µ, for example: : Argentina model uA.. : µA.. uPA.. : µPA.. : Thai model uPB.. : µPB.. uPC.. : µPC.. uPD.. : µPD.. : Taiwan model Ref. No. Part No. Description Remark Ref.
  • Page 46 1-500-445-21 FERRITE, EMI (SMD) (2012) A-1157-000-A KEY-1 BOARD, COMPLETE ********************* R207 1-216-295-11 SHORT CHIP R250 1-216-857-11 METAL CHIP 1/10W 1-831-613-11 CABLE, FLEXIBLE FLAT (4 CORE) (FFC412) R252 1-216-833-11 METAL CHIP 1/10W 1-831-616-11 CABLE, FLEXIBLE FLAT (4 CORE) (FFC411) R253 1-216-821-11 METAL CHIP 1/10W...
  • Page 47 0.5PF A-1157-973-A MAIN BOARD, COMPLETE (AR) 1-126-964-11 ELECT 10uF ********************* 1-162-970-11 CERAMIC CHIP 0.01uF 1-832-008-11 CABLE, FLEXIBLE FLAT (14 CORE) (FFC802) 1-115-416-11 CERAMIC CHIP 0.001uF 2-674-958-01 PAPER (MAIN), SHIELD 1-162-970-11 CERAMIC CHIP 0.01uF 3-254-142-01 SCREW (B3), (+) BV TAPPING (AEP) 1-107-826-11 CERAMIC CHIP 0.1uF...
  • Page 48 1-141-304-21 CAP, CERAMIC TRIMMER 10PF C350 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 1-141-442-91 CAP, CERAMIC TRIMMER 20PF C353 1-126-925-11 ELECT 470uF 1-141-459-11 CAP, TRIMMER (SEAL TYPE) 45PF (AEP) C354 1-162-964-11 CERAMIC CHIP 0.001uF < DIODE > C355 1-126-767-11 ELECT 1000uF C356 1-107-826-11 CERAMIC CHIP 0.1uF...
  • Page 49 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JUMPER RESISTOR > 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP 1-216-864-11 SHORT CHIP 0 (EXCEPT AEP) 1-216-809-11 METAL CHIP 1/10W 1-216-864-11 SHORT CHIP 0 (AEP) 1-216-809-11 METAL CHIP...
  • Page 50 CFD-S03CP/S03CPL Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R262 1-216-864-11 SHORT CHIP R813 1-216-821-11 METAL CHIP 1/10W R316 1-216-864-11 SHORT CHIP R814 1-216-821-11 METAL CHIP 1/10W R321 1-216-809-11 METAL CHIP 1/10W R815...
  • Page 51 R870 1-216-821-11 METAL CHIP 1/10W ********************** R871 1-216-821-11 METAL CHIP 1/10W R872 1-216-821-11 METAL CHIP 1/10W 1-832-009-11 CABLE, FLEXIBLE FLAT (20 CORE) R873 1-216-821-11 METAL CHIP 1/10W (FFC401,FFC402) 2-654-085-01 HOLDER, IR R874 1-216-821-11 METAL CHIP 1/10W 2-673-399-01 SHEET (IR), ADHESIVE...
  • Page 52 1-216-864-11 SHORT CHIP 0 J901 1-526-818-11 INLET, AC (- AC IN) (E92,MX) (CND,E41,E92,AUS,MX,SP,AR,TH,TW) 0 J901 1-526-838-11 INLET, AC 2P (- AC IN) (EXCEPT CND,E92,MX) FB206 1-414-445-11 FERRITE, EMI (SMD) (1608) 0 J901 1-540-009-11 INLET, AC (- AC IN) (CND) (AEP,UK,CET,KR,IT)
  • Page 53 8-848-483-12 OPTICAL PICK-UP (KSS-213C/C2RP) ANT2 1-754-376-11 ANTENNA, TELESCOPIC (FM) 0 F902 R112 1-216-821-11 METAL CHIP 1/10W 1-533-468-12 FUSE, GLASS TUBE (DIA. 5) (T2AL/250V) R201 1-216-837-11 METAL CHIP 1/10W M702 X-2625-769-1 GEAR ASSY (MB) (RP), MOTOR (SLED) R202 1-216-805-11 METAL CHIP...
  • Page 54 CFD-S03CP/S03CPL REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2006.01 2006.02...

This manual is also suitable for:

Cfd-s03cpl

Table of Contents