Advertisement
Quick Links
Micro HI-FI
Component System
GB
Operating Instructions
©2012 Sony Corporation
CMT-V10iP
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
Owner's Record
plug is damaged, liquid has been spilled or objects
The model and serial numbers are located on the bottom
have fallen into the apparatus, the apparatus has
exterior of the main unit. Record these numbers in the
been exposed to rain or moisture, does not operate
space provided below. Refer to them whenever you call
normally, or has been dropped.
upon your Sony dealer regarding this product.
The following FCC statement applies only
Model No.
Serial No.
to the version of this model manufactured
for sale in the U.S.A. Other versions may
not comply with FCC technical regulations.
WARNING
NOTE:
This equipment has been tested and found to comply
To reduce the risk of fire or electric shock,
with the limits for a Class B digital device, pursuant
do not expose this apparatus to rain or
to Part 15 of the FCC Rules. These limits are designed
moisture.
to provide reasonable protection against harmful
interference in a residential installation. This equipment
To reduce the risk of fire or electric shock, do not expose
generates, uses and can radiate radio frequency energy
this apparatus to dripping or splashing, and do not place
and, if not installed and used in accordance with the
objects filled with liquids, such as vases, on the apparatus.
instructions, may cause harmful interference to radio
To reduce the risk of fire, do not cover the ventilation
communications. However, there is no guarantee that
opening of the apparatus with newspapers, tablecloths,
interference will not occur in a particular installation.
curtains, etc.
If this equipment does cause harmful interference to
Do not place the naked flame sources such as lighted
radio or television reception, which can be determined by
candles on the apparatus.
turning the equipment off and on, the user is encouraged
Do not install the appliance in a confined space, such as a
to try to correct the interference by one or more of the
bookcase or built-in cabinet.
following measures:
As the main plug of AC adaptor is used to disconnect
Reorient or relocate the receiving antenna.
the AC adaptor from the mains, connect it to an easily
Increase the separation between the equipment and
accessible AC outlet. Should you notice an abnormality
receiver.
in it, disconnect it from the AC outlet immediately.
Connect the equipment into an outlet on a circuit
Do not expose batteries or apparatus with battery-
different from that to which the receiver is connected.
installed to excessive heat such as sunshine, fire or the
Consult the dealer or an experienced radio/TV
like.
technician for help.
The AC adaptor is not disconnected from the mains as
long as it is connected to the AC outlet, even if the main
CAUTION
unit itself has been turned off.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
The nameplate is located on the bottom exterior of the
authority to operate this equipment.
main unit and on the surface of the AC adaptor.
For customers in Europe and Australia
CAUTION
The use of optical instruments with this product will
Disposal of Old Electrical &
increase eye hazard.
Electronic Equipment
(Applicable in the European
Notice for the customers in the Canada
Union and other European
This Class B digital apparatus complies with Canadian
ICES-003.
countries with separate
collection systems)
Notice for the customers in the U.S.A.
This symbol on the product or on its packaging indicates
The dating code is located on the bottom exterior of the
that this product shall not be treated as household
main unit.
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
Important Safety Instructions
electronic equipment. By ensuring this product is
1) Read these instructions.
disposed of correctly, you will help prevent potential
2) Keep these instructions.
negative consequences for the environment and human
3) Heed all warnings.
health, which could otherwise be caused by inappropriate
4) Follow all instructions.
waste handling of this product. The recycling of materials
5) Do not use this apparatus near water.
will help to conserve natural resources. For more detailed
6) Clean only with dry cloth.
information about recycling of this product, please
7) Do not block any ventilation openings. Install in
contact your local Civic Office, your household waste
accordance with the manufacturer's instructions.
disposal service or the shop where you purchased the
8) Do not install near any heat sources such as radiators,
product.
heat registers, stoves, or other apparatus (including
Applicable accessory: Remote commander
amplifiers) that produce heat.
Note on DualDiscs
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
A DualDisc is a two sided disc product which mates
with one wider than the other. A grounding type
DVD recorded material on one side with digital
plug has two blades and a third grounding prong.
audio material on the other side. However, since the
The wide blade or the third prong are provided for
audio material side does not conform to the Compact
your safety. If the provided plug does not fit into your
Disc (CD) standard, playback on this product is not
outlet, consult an electrician for replacement of the
guaranteed.
obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
Music discs encoded with copyright
Location of Controls
4-423-933-11 (1)
protection technologies
This product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
Unit (Top)
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
License and Trademark Notice
iPhone®, iPod®, iPod classic®, iPod nano®, and iPod
touch® are trademarks of Apple Inc., registered in the
U.S. and other countries.
MPEG Layer-3 audio coding technology and patents
Display panel
licensed from Fraunhofer IIS and Thomson.
When the system is powered up, the setting status appears on the display panel.
Windows Media is either a registered trademark or
When the system goes to Standby mode, the setting status disappears from the display panel.
trademark of Microsoft Corporation in the United
States and/or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
Unit (Front)
distribution of such technology outside of this product
is prohibited without a license from Microsoft or an
authorized Microsoft subsidiary.
Printed in China
All other trademarks and registered trademarks are of
™
®
their respective holders. In this manual,
and
marks
are not specified.
Remote indicator
Lights in amber when a signal is received from the remote.
Getting Started
Power (DC IN 9.5 V)
1
Connect the AC adaptor to the unit.
2
Plug the AC adaptor into a wall outlet.
AUDIO IN jack
Connect an external audio component.
Remote
Remote sensor
Remote indicator
CD door
(CD compartment)
This manual mainly explains operations using the
remote, but the same operations can also be performed
using the buttons on the unit having the same or
iPod/iPhone connector
similar names.
The SLEEP and TIMER MENU functions indicated in
pink on the remote can be activated using SHIFT .
If you want to operate the SLEEP or TIMER MENU
functions, press and hold SHIFT and press SLEEP
or TIMER MENU button. If you press either
of these buttons without holding SHIFT pressed,
the system will activate the BASS BOOST or SOUND
EFFECT function.
To use the iPod/iPhone
1
Open the dock by pushing the center of the dock.
2
Place the iPod/iPhone.
To AC Adaptor
AM loop antenna
FM lead antenna (Extend it horizontally.)
Antennas
Find a location and an orientation that provide good
reception, and then set up the AM antenna.
Keep the antenna away from the power cord to avoid
picking up noise.
To use the remote
Playing a CD/MP3 disc
Remove the battery compartment lid, and insert the two
supplied R6 (size AA) batteries, side first, matching
1
the polarities shown below.
2
Notes on using the remote
With normal use, the batteries should last for about 6 months.
Do not mix an old battery with a new one or mix different types of
batteries.
If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
3
4
5
To eject a disc
Press
disc by pulling up the edge of the disc while holding one
finger against the spindle.
Notes
Setting the clock
1
Press
to turn on the system.
2
Press and hold SHIFT
and TIMER MENU
to
select the clock set mode.
If "PLAY SET" flashes, press /
repeatedly to
Other operations
select "CLOCK, " and then press
(enter)
.
To
3
Press /
repeatedly to set the hour, then press
(enter)
.
Pause playback
4
Use the same procedure to set the minutes.
Stop playback
Note
Select a folder on
The clock settings are reset when you disconnect the power cord or if
a power failure occurs.
an MP3 disc
Select a track or
To display the clock when the system is off
file
Press DISPLAY
. The clock is displayed for about
8 seconds.
Find a point in a
Dock
track or file
Select Repeat Play REPEAT
Eject a disc
To change the play mode
Press PLAY MODE
stopped. You can select Normal Play mode ("Normal" or
"FLDR" for all MP3 files in the folder on the disc),
Shuffle Play mode ("SHUF" or "FLDR SHUF*" for folder
shuffle), or Program Play mode ("PGM").
* When playing a CD-DA (audio) disc, FLDR (SHUF) Play performs
Notes on Repeat Play
Notes on Shuffle Play mode
Notes on playing MP3 discs
Operations
Select the CD function.
Press CD FUNCTION
on the remote or press
FUNCTION
on the unit repeatedly.
Open the CD door.
Press
(Open/Close)
on the unit.
(Open/Close)
Set a disc.
Push the center part of the disc with two fingers until
the disc snaps into its mounted position.
Set a disc with the
label side facing
forward.
Close the CD door.
Press
(Open/Close)
on the unit.
"READING" appears.
Start playback.
Press
on the remote or press
on the
unit.
(Open/Close)
on the unit and remove the
The system will automatically close the CD door if a few minutes
elapse of no operation with the CD door open.
Do not set a disc with non-standard shapes (e.g., heart, square, star).
The disc may fall into the system and cause irreparable damage.
If you press / with the CD door open, the system will
automatically close the CD door.
Do not use a disc with tape, seals or paste on it as this may cause a
malfunction.
When you eject a disc, handle the disc by its edge. Do not touch the
surface.
Press
(or
on the unit). To
resume play, press the button again.
.
+/
.
/
//
.
Hold down /
(or
/
on the unit) during
playback, and release the button at
the desired point.
repeatedly until "
" or
"
1" appears.
on the unit.
repeatedly while the player is
the same operation as normal (SHUF) Play.
"
" indicates that all tracks or files will be repeated until you stop
playback.
"
1" indicates that a single track or file will be repeated until you
stop playback.
When Shuffle Play mode is set to "SHUF, " the system shuffle-plays
all tracks or files on the disc. When Shuffle Play mode is set to
"FLDR SHUF, " the system shuffle-plays all tracks or files in selected
folder.
When you turn off the system, the selected Shuffle Play mode
("SHUF" or "FLDR SHUF") is cleared and the play mode returns to
Normal Play mode ("FLDR").
Do not save other types of tracks or files, or unnecessary folders on a
disc that has MP3 files.
Folders that have no MP3 files are skipped.
The system can only play MP3 files that have a file extension of
".mp3. "
Even when file name has the ".mp3" file extension, if the actual
file differs, playing this file may generate a loud noise which could
damage the system may malfunction.
The maximum number of:
255* folders (including the root folder)
512 MP3 files
512 MP3 files in a single folder
9 folder levels (in the tree structure of files)
Advertisement
Related Manuals for Sony CMT-V10iP
Summary of Contents for Sony CMT-V10iP
- Page 1 Refer to them whenever you call normally, or has been dropped. the system will activate the BASS BOOST or SOUND upon your Sony dealer regarding this product. EFFECT function. The following FCC statement applies only Model No.
- Page 2 Sony cannot accept responsibility in the event that data recorded to To start from a specific CD track, audio file, and radio Play does not start from the first track.