Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Intel
Quick Setup Manual
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITH-
OUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUSTeK
COMPUTER INC. (ASUS). ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR
ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING
THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright © 2000 ASUSTeK COMPUTER INC. All Rights Reserved.
®
850 ATX Motherboard
ASUS P4T-M Quick Setup Manual
®
P4T-M
Product Name:
Release Date:
ASUS P4T-M
December 2000
1
Advertisement
Table of Contents
Related Manuals for Asus P4T-M
Summary of Contents for Asus P4T-M
- Page 1 FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITH- OUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUSTeK COMPUTER INC. (ASUS). ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
-
Page 2: P4T-M Motherboard Layout
Firmware PCI2 (ICH2) CR2032 3V Lithium Cell WOLCON NO_REBOOT CMOS Power CHA_FAN PCI3 AFPANEL CLRTC Audio USB2 Codec P4T-M IDELED PANEL COM2 Grayed components are available only on certain models at the time of purchase. ASUS P4T-M Quick Setup Manual... -
Page 3: Layout Contents
System Message LED (2 pins) 13) SMI (PANEL) p.35 System Management Interrupt Switch Lead (2 pins) 14) PWRSW (PANEL) p.35 ATX Power / Soft-Off Switch Lead (2 pins) 15) RESET (PANEL) p.35 Reset Switch Lead (2 pins) ASUS P4T-M Quick Setup Manual... -
Page 4: Hardware Setup
Failure to do so may cause severe damage to your motherboard, peripherals, and/or components. The onboard LED when lit acts as a reminder that the system is in suspend or soft-off mode and not powered OFF. ASUS P4T-M Quick Setup Manual... -
Page 5: System Memory
C-RIMM RIMMA2 128MB RDRAM RIMMA1 128MB RDRAM RIMMB2 C-RIMM RIMMB1 128MB RDRAM RIMMA2 RIMMA1 C-RIMM RIMMB2 128MB RDRAM 128MB RDRAM RIMMB1 128MB RDRAM RIMMA2 128MB RDRAM RIMMA1 ASUS P4T-M Quick Setup Manual... -
Page 6: Installing Memory
RIMM sockets. WARNING! RIMM modules become extremely hot during operation. To re- duce the risk of personal injury from hot surfaces, allow the modules to cool off before removing them. ASUS P4T-M Quick Setup Manual... -
Page 7: Central Processing Unit (Cpu)
Before you start, you should check to see that you have the following items: (NOTE: Motherboard layout is not identical to the example.) Rubber Pad Metal Baseboard 2 Metal heatsink retaining clips 4 Copper captive nuts 4 Washers 4 Pan Head screws 2 Heatsink support bases ASUS P4T-M Quick Setup Manual... -
Page 8: Cpu Installation
Copper captive nut Washer I M P O R T A N T : This step is a M U S T! The washers are necessary to prevent shorting. ASUS P4T-M Quick Setup Manual... -
Page 9: Step 2: Install The Cpu
If not, check its orientation or check for bent pins. E. Secure the CPU into the socket by pushing the socket lever all the way down. You will hear a click indicating that the lever is in place. ASUS P4T-M Quick Setup Manual... -
Page 10: Step 4: Install The Heatsink
Place the two heatsink support base as shown and screw in the four pan head screws. Step 4: Install the Heatsink Carefully place the fan heatsink on top of the heatsink support base and connect the fan power cable to the CPU fan connector. Connect to the CPU fan connector. ASUS P4T-M Quick Setup Manual... - Page 11 Socket 423 pro- cessor or else boot-up may not be possible. Socket 423 processors provide internal thermal sensing so that a socket mounted thermal resistor is not needed. ASUS P4T-M Quick Setup Manual...
-
Page 12: Assigning Irqs For Expansion Cards
ACPI Mode when enabled IRQ Holder for PCI Steering IRQ Holder for PCI Steering PS/2 Compatible Mouse Port Numeric Data Processor Primary IDE Channel Secondary IDE Channel *These IRQs are usually available for ISA or PCI devices. ASUS P4T-M Quick Setup Manual... -
Page 13: Interrupt Request Table For This Motherboard
Remove ONLY when you will be using an AGP Pro card. Use a rigid tip, such as a pen tip, to dislodge and remove the tab from the bay. Removing the tab ASUS P4T-M Quick Setup Manual... -
Page 14: Onboard Connectors
UltraDMA/100 IDE devices must use a 40-pin 80-conductor IDE cable for 100MByte/sec transfer rates. NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. P4T-M PIN 1 P4T-M IDE Connectors ASUS P4T-M Quick Setup Manual... - Page 15 NOTE: The “Rotation” signal is to be used only by a specially designed fan with rotation signal. The Rotations per Minute (RPM) can monitored using a utility such as ASUS PC Probe or Intel LDCM. WARNING! The CPU and/or motherboard will overheat if there is no airflow across the CPU and onboard heatsinks.
- Page 16 4) Wake-On-LAN Connector (3-pin WOL) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card.
- Page 17 P4T-M Internal Audio Connectors 7) Front-Panel Connectors (12-pin AFPANEL) Theis connector allows you to setup an optional ASUS ipanel, an easy to access operational console mounted in a standard front drive bay. The iPanel offers front I/O ports, status LEDs and space reserved for a hard disk drive. If you are...
- Page 18 230watts) must supply at least 720mA +5VSB. Pin 1 +12V DC +12V DC ATX12V ATXPWR Pin 1 +3.3VDC +3.3VDC +3.3VDC -12VDC +5VDC PS_ON# +5VDC P4T-M PWR_OK -5VDC +5VSB +5VDC +12VDC +5VDC P4T-M ATX & Auxiliary Power Connectors ASUS P4T-M Quick Setup Manual...
- Page 19 This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without having to turn off your power switch. This is a preferred method of rebooting to prolong the life of the system’s power supply. ASUS P4T-M Quick Setup Manual...