Page 2
Dear Customer Thank you for choosing one of our high quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best per formance and control indeed we are setting the highest standards of excel lence.
Contents Contents Operating Instructions Safety Diagram of appliance Control panel Prior to using for the first time Setting the water softener Adding special salt Filling up with rinse aid In daily use Loading cutlery and dishes Adjusting the height of the upper basket Adding detergent Using 3in1 detergents Selecting the dishwashing cycle (Cycle Table)
Operating Instructions Operating Instructions Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. Correct use • The dishwasher is only intended for washing domestic dishes. • Additions or modifications to the dishwasher are not permitted. •...
Diagram of appliance Diagram of appliance Upper basket spray arm and floor spray arm Water hardness dial Dispenser for special salt Dispenser for detergent Dispenser for rinse aid Rating plate Filters...
Control panel Control panel ON/OFF button The ON/OFF button is used to turn the dishwasher on and off. Programme buttons End of cycle indicator Programme progress display delay timer Function buttons Select Control 3 in1 function indicators The Programme buttons are used to select the desired dishwashing cycle.
Page 7
Control panel Function buttons: In addition to the pre set dishwashing cycle, the following functions can also be set using these buttons: Function button 1 Set the water softener Function button 2 Activates/deactivates rinse aid inflow when 3in1 on Function button 3 not programmed The rinse aid inflow is only affected, if the 3in1 function is selected.
Prior to using for the first time Prior to using for the first time If you wish to use 3 in 1 detergent: – First read the section “Using 3in1 detergents”. – Do not fill up with special salt or rinse aid. If you do not use 3in1 detergent, before using for the first time 1.
Prior to using for the first time Setting electronically: 1. Press the ON/OFF button. If the only LED indicator illuminated is one that belongs to a programme button, this means that this dishwashing cycle has been activated. The dishwashing cy cle must be deselected: Press function buttons 2 and 3 simultaneously for approx.
Prior to using for the first time Adding special salt To decalcify the water softener, it must be filled up with special salt. Use only special salt suitable for domestic dishwashers. If you do not use 3 in1 detergent, fill up with special salt: –...
Prior to using for the first time Filling up with rinse aid With rinse aid the rinsing water drains away better and so you get smear free, gleaming dishes and clear glasses. If you do not use 3in1 detergent, fill up with rinse aid: –...
Prior to using for the first time Setting the amount of rinse aid required Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfactory”.) The dosage can be set from 1 6.
In daily use In daily use Loading cutlery and dishes Sponges, cleaning cloths and any other objects that can absorb water must not be washed in the dishwasher. Plastic and Teflon coated dishes and pans tend to retain water droplets. These dishes and pans therefore do not dry as well as those made of china and stainless steel.
In daily use Loading cutlery Warning: Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery rack or in the upper basket to avoid the risk of injury. To ensure that all items of cutlery in the cutlery basket can be reached by the water, you should: 1.Place the grid insert on the cutlery 2.Place forks and spoons in the cutlery...
Page 15
In daily use Pots, Pans, Large Plates Load larger and heavily soiled dishes and pans in the lower basket. (Max. diameter for plates 29 cm). To make it easier to load larger dishes, the two plate rests on the right in the lower basket can be folded down.
Page 16
In daily use Cups, Glasses, Coffee Service Load smaller, fragile crockery and long, sharp cutlery in the upper basket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items.
In daily use Adjusting the height of the upper basket Maximum height of dishes in the Upper basket Lower basket with upper basket raised 22 cm 30 cm with upper basket lowered 24 cm 29 cm The height of the baskets can also be adjusted when they are loaded. Raising / Lowering the upper basket 1.
In daily use Adding detergent Detergents remove the dirt from dishes and cutlery. The detergent must be added before the cycle starts. Only use detergent intended for domestic dishwashers. The detergent compartment is located on the inside of the door. 1.
In daily use Using 3in1 detergents These products are detergents with a combined cleaning, rinsing and salt func tion. When the 3in1 function is activated, – the addition of special salt and rinse aid from the respective dispenser is pre vented.
In daily use If you want to use 4in1 products When using "4 in 1" detergents that integrate also anti glass corrosion agent into "3 in 1" formula, please follow the same indication as given for "3 in 1" de tergents.
In daily use Selecting a programme When your dishes look like this, select: an intensive programme. a normal or energy saving programme. a short programme (e.g. 30 minute pro gramme).
In daily use Starting a dishwashing cycle 1. Check that the spray arms can turn freely. 2. Turn the water tap on fully. 3. Close the door. 4. Press the ON/OFF button. 5. Select the desired cycle. The programme display lights up. The selected cycle will begin after approxi mately 3 seconds.
In daily use Setting the Delay Timer Using the delay timer you can delay the start of a dishwashing cycle for 3, 6 or 9 hours. 1. Press the ON/OFF button. 2. Press the Delay Timer button repeatedly until the indicator next to the number of hours for which the start of the dishwashing cycle is to be delayed lights up, e.
Care and cleaning Care and cleaning Do not use furniture care products or aggressive cleaners. • When necessary, clean the dishwasher’s controls with a soft cloth and clean warm water. • Occasionally check the internal dispensers, door seal and water inlet filter (if fitted) for dirt and clean them, if necessary.
What to do if… What to do if… Remedying small malfunctions Before you call the Customer Care Department, please check whether – you cannot remedy the fault yourself with the help of the following fault table – whether it is caused by faulty, electrical connections and/or faulty water con nections.
Page 26
What to do if… Malfunction Possible cause Remedy The programme indicator for the The sink outlet is blocked. Clean out sink outlet. selected dishwashing cycle is flashing, the indicator for the end of the Water drain hose has not been Check hose installation.
What to do if… If the dishwashing results are not satisfactory The dishes are still dirty. • The wrong dishwashing cycle was selected. • The dishes were loaded is such a way that the dishwashing water did not reach all items. The baskets for the dishes must not be overloaded. •...
Disposal Disposal Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dis pose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance The symbol on the product or on its packaging indicates that this product...
Notes for Test Institutes Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test cycle (see “Cycle Table”). Tests in accordance with EN 50242 must be carried out when the salt dis penser in the water softener and the rinse aid dispenser have been filled with salt and rinse aid respectively, and using the test cycle (see “Cycle Table”).
Installation and connection instructions Installation and connection instructions Safety information for the installation • Only transport the dishwasher in an upright position, otherwise salt water may run out. • Before using the dishwasher for the first time, check for any damage caused in transport.
Connecting the dishwasher Connecting the dishwasher Connecting to the water supply • The dishwasher can be connected to cold and hot water supplies up to max. 60°C. • The dishwasher must not be connected to open hot water appliances or in stantaneous water heaters.
Connecting the dishwasher Water drainage Drain hose The drain hose must not be kinked, crushed or entangled. • Connecting the drain hose: maximum permitted height above the bottom edge of the appliance: 60 cm. Extension hoses • Extension hoses are available from your dealer or from our Customer Care Depart ment.
Guarantee/Customer Service Guarantee/Customer Service Belgium DECLARATION OF GUARANTEE TERMS. Our appliances are produced with the greatest of care. However, a defect may still occur. Our consumer serv ices department will repair this upon request, either during or after the guarantee period. The service life of the appliance will not, however, be reduced as a result.
Page 34
In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden. Further after-sales service agencies overseas In these countries our AEG-Electrolux agents’ own guarantee conditions are applicable. Please obtain further details direct. Autres agences étrangères assurant le service après-vente Dans ces pays, les conditions de garantie des concessionnaires de la région...
Page 35
Fax: 905 829 3985 Tel.: 25355 Tel.: 2024181719 Australia Korea (South) Namibia The Andi-Co Group Core Incorp. AEG NAMIBIA (PTY) 1 Stamford Road 3/F Chewoo Bldg. LIMITED-Jeppe Street Oakleigh VIC 3166 200 Nonhyun-Dong Northern Industrial Area Tel.: (03) 9569 1255...
Service Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Cus tomer Care Department or one of our service partners.