Contents Contrast/Brightness/Sharpness/Colour/ Safety Precautions .......... 3 Hue ............20 IMPORTANT SAFETY INFORMATION ON Colour Temp .......... 20 OPERATING YOUR TV ........3 Noise Reduction ........20 DO’s ............3 Film Mode ..........20 DON’Ts ............ 3 Store ............. 20 1.Power Source ..........4 Reset ............
Page 3
Phase ............ 24 Sound in PC mode ......... 24 Other Features ..........25 TV Status ............ 25 Mute Indicator ..........25 PIP and PAP modes ........25 AV Modes ........... 25 Freeze Picture ..........25 Zoom Modes ..........25 Teletext ............26 Connect Peripheral Equipment ....
DON’Ts Safety Precautions DON’T continue to operate the equipment if you Please read the following recommended safety pre- are in any doubt about it working normally, or if it cautions carefully for your safety. is damaged in any way switch off, withdraw the IMPORTANT SAFETY INFORMATION ON mains plug and consult your dealer.
1.Power Source specifications as the original one. Unauthorized sub- stitutions may result in fire, electrical shock, or other The TV set should be operated only from a 220-240 V hazards. AC, 50 Hz outlet. Ensure that you select the correct 9.
Page 6
14 Connection to a television distribution system (Cable TV etc.) from tuner: Apparatus connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to pro- tective earthing - and to a television distribution sys- tem using coaxial cable, may in some circumstances create a fire hazard.
Accessories Features • Remote controlled colour LCD TV. • Fully integrated Digital TV (DVB-T) • Full HD (1920x1080) • 100 programmes from VHF, UHF bands or cable channels can be preset. EU Plug • It can tune cable channels. • Controlling the TV is very easy by its menu driven INPUT TV/DTT system.
LCD TV Front View STANDBY BUTTON SOURCE SELECT TV/AV Front View MENU BUTTON MENU PROGRAMME UP/DOWN P/CH VOLUME UP/DOWN Built-in Speakers Power/Standby LED Fixed Table Top Stand IR Receiver Rear View and Peripheral Connections 220V-240V POWER AC~50 Hz E F G Aerial (TV/DTT) Headphone Audio Line Out...
= Picture mode / INPUT = INPUT For source selection, first press INPUT button on the remote controller then source button which you want to switch. ** These buttons can control most Hitachi DVD Players and Recorders. English - 8 -...
Handling the Remote Control Preparation • It could cause corrosion or battery leakage and may For ventilation, leave a space of at least 10 cm free all result in physical injury and/or property damage in- around the set. To prevent any fault and unsafe situ- cluding fire.
Switching The TV ON/OFF Initial Settings To switch the TV on: When the TV is turned on for the first time, IDTV is on first. Because this is the first time that IDTV has been Your TV will switch on in two steps: used, there are no channels stored in the memory.
After Automatic Search process is completed, the name and times of the programme are not available then following message asking for analogue channel search “No Information Available” is displayed in the information appears on the screen. TV switches to the analogue banner.
then you will be asked for switching to that channel cast and will download this to your IDTV automatically. when the reminder time is reached. This operation will normally take approximately 30 sec- onds. Electronic Programme Guide Wed 31/7 09:13 If you want to perform this, you need to set Automatic Download to “Enabled”...
will be deleted. • Press buttons to select the ‘’Delete’’ item on CHANNEL LIST Channel List menu. 1. BBC ONE As seen on Channel List menu, “Delete” is written 2. BBC TWO 3. ITV 8 next to OK item at the bottom of the screen to indicate 4.
ous/next character. Pressing buttons toggles the current character, i.e., ‘b’ character be- comes ‘a’ on and ‘c’ on . Pressing the numeric CHANNEL LIST buttons ‘0...9’ replaces the highlighted character with 1. BBC ONE 2. BBC TWO the characters printed above the key one by one as 3.
Press the SELECT button on your remote control to tune to the Do you want to search for highlighted channel. analogue channels? Press MENU to exit this screen. Hint: Entering More item pressing button gets Highlight “Yes” and press OK button to searh for quick and easy use of the all menus in IDTV analogue channels.The following menu appears on displaying information for the highligted menu...
signal level, signal quality and network name are shown at the bottom of the screen. AUTO PROGRAM In both manual and auto search any existing channel in the database is not re-stored to avoid redundant duplicates of that channel. First Time Installation Country The user can use this item to load default settings, Text language...
Audio Language Configuration Digital terrestrial television channels can broadcast Favourite Mode simultaneous sountracks in more than one language. Channel List Tv Only This function selects which language soundtrack you Language Settings will hear when switching to a channel broadcasting Parental Settings Time Settings with the multiple soundtracks.
Maturity Lock: Configuration Use or buttons to set Maturity Lock to the “Off, Age 4, Favourite Mode Age 5...Age17 or Age 18”. (“Off, Age 4, Age Channel List Tv Only 5,..., Age 18, above 6 years, Universal viewing (FRA) Language Settings or X-rated ESP”.) Parental Settings Menu Lock:...
Setup”. Press OK button to display TV Setup menu screen. Programme Timers Main Menu No Channel Name Start Date Mode ITV 1 20:00 21:00 12/05/2005 Active BBC ONE 00:00 00:00 01/01/2005 Inactive Channel List BBC ONE 00:00 00:00 01/01/2005 Inactive BBC ONE 00:00 00:00 01/01/2005 Inactive...
Reset Menu System By pressing button, select Reset. Press Picture Menu or OK button to reset the picture modes to factory default settings. PICTURE Sound Menu Mode Dynamic Contrast SOUND Brightness Volume Sharpness Colour Equalizer Colour Temp Normal Balance Noise Reduction...
balance Feature Menu By pressing button, select Balance. Press FEAUTURE button to increase balance to the right. Press button to decrease balance to the left. Balance level Sleep Timer can be adjusted between -32 and +32. Child Lock Language English...
Default Zoom Colour System By pressing button, select Default Zoom. By pressing button, select Colour System. You can set Default Zoom to Full, Panoramic, 4:3 Press button to change the colour system to ...
By moving the cursor in four directions you can reach APS is running... 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the AV mode).
Source menu By pressing button, select the sixth icon and press or OK button. Source menu appears on the Autoposition screen. H Position V Position SOURCE : TV Dot Clock Phase TUNER AV - 1 SCART AV - 2 SCART AV - 2 S SCART+SVHS...
Other Features Note that in PIP/PAP modes, pressing button will directly change sources. TV Status Freeze Picture Programme Number, Programme Name, You can freeze the picture on the screen by pressing Sound Indicator and Zoom Mode are displayed on the screen when a new programme is entered or button on the remote controller.
Panoramic: Teletext This stretches the left and right sides of a normal Teletext system transmits informartion such as news, picture (4:3 aspect ratio) to fill the screen, without sports and weather on your TV. Note that if the signal making the picture appear unnatural. becomes insufficient, some text errors may occur or the teletext mode may be quitted.Teletext function buttons are listed below:...
Copy Facility Connect Peripheral Equipment Source selection for VCR recording. High Definition • Select Feature menu. Your LCD Television is capable of displaying High Defi- • Select AV-2 Out by pressing button. nition pictures from devices such as a High Definition •...
Tips Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pic-...
Peripheral Equipment Connections HEADPHONE AUDIO AUDIO IN VIDEO IN VIDEO ANT.IN CAMCORDER SATELLITE RECEIVER ANTENNA Aerial Connection Outdoor Aerial Connection Round 75 ohm coaxial cable 75 VHF/UHF Rear of TV English - 29 -...
Specifications DISPLAY Size/Diagonal 47" (16:9 Display) Viewable size / Diagonal 105.06 x 58.48 (cm) / 120.23 (cm) VIDEO STANDARDS Video PAL/NTSC/SECAM TV Tuner (Analog) PAL/SECAM/B/G D/K K' I/I' L/L' VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20 / S21-S41) 100 PRESET CHANNELS TV Tuner (Digital) Frequency range...
Page 32
Specifications RS232 In 9 pin mini D-sub OUTPUT CONNECTIONS Line Out Audio Phono L/R Subwoofer 1 x Phono (Mono) Audio Speaker Output 2x8 W RMS Synchronization Sync on green, composite sync with automatic detection separate H and V sync. Additional output available SPDIF 1 x Phono On/Off, Standby, Vol+, Vol-, Prog +, Prog -, Menu, TV/AV.
Specifications Signal Input PC RGB Terminal (D-sub 15-pin connector) Input signal G or sync on green • When different kinds of input signals are simul- taneously input to the monitor via a graphics board or the like, the monitor will automatically No connection select the signals in the following priority order: No connection...
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768, frequency range of 56-85 Hz. The following table is an illustration of some of the typical video display modes. M ode Resolution Frequency Horizontal Vertical Hor.(kHz) Ver.(Hz)
Appendix C: Main and PIP-PAP Picture Combinations M ain and PIP, PAP picture combinations AV-1 AV-1 AV-2 AV-2 AV-3 AV-4 AV-5 HDM I 1 HDM I 2 PC RGB MAIN TUNER CVBS CVBS SVHS YPBPR CVBS SVHS PIP,PAP TUNER / DTV * AV-1 CVBS...
12 months of the date of purchase provided that: i) The product has been installed and used only in accordance with the instructions supplied with the product ii) The product has not been repaired, maintained, or modified by any person other than an Hitachi authorised engineer...