hit counter script
Asus Z9PR-D12 SERIES User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. Z9PR-D12 SERIES
  6. User manual

Asus Z9PR-D12 SERIES User Manual

User guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Z9PR-D12
Series

Advertisement

Table of Contents
loading

Related Manuals for Asus Z9PR-D12 SERIES

Summary of Contents for Asus Z9PR-D12 SERIES

  • Page 1 Z9PR-D12 Series...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    About this guide ..................x How this guide is organized ...............x Where to find more information ............x Conventions used in this guide ............xi Typography ..................xi Z9PR-D12 series specifications summary ..........xii Chapter 1: Product introduction Welcome! ..................1-3 Package contents ................. 1-3 Serial number label ..............

  • Page 4: Contents

    PCI Express x16 slot (x16 link) ........2-18 2.5.5 PCI Express x8 slot (x8 link) ......... 2-18 2.5.6 PIKE slots ..............2-19 2.5.7 Installing an ASUS PIKE RAID card ......2-20 Onboard LEDs ................2-21 Jumpers ..................2-23 Connectors ................. 2-27 2.8.1 Rear panel connectors ..........2-27 2.8.2...
  • Page 5 Contents 4.3.2 System Time [xx:xx:xx] ..........4-10 Advanced menu ................. 4-11 4.4.1 CPU Configuration ............4-11 4.4.2 CPU Power Management Configuration ....... 4-13 4.4.3 Chipset Configuration ........... 4-15 4.4.4 PCH SATA Configuration ..........4-21 4.4.5 PCH SCU Configuration ..........4-22 4.4.6 PCI Subsystem Settings ..........
  • Page 6 Contents LSI Software RAID Configuration Utility ........5-5 5.2.1 Creating a RAID set ............5-6 5.2.2 Adding or viewing a RAID configuration ....... 5-12 5.2.3 Initializing the virtual drives ........... 5-13 5.2.4 Rebuilding failed drives ..........5-17 5.2.5 Checking the drives for data consistency ..... 5-19 5.2.6 Deleting a RAID configuration ........
  • Page 7 Running the support DVD ..........6-33 6.8.2 Drivers menu ..............6-33 6.8.3 Utilities menu ..............6-34 6.8.4 Make disk menu ............6-34 6.8.5 Contact information ............6-34 Appendix: Reference information Z9PR-D12 block diagram .............A-3 Z9PR-D12C block diagram ............A-4 ASUS contact information ................1...

  • Page 8: Notices

    Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. viii...

  • Page 9: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.

  • Page 10: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 11: Conventions Used In This Guide

    Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.

  • Page 12: Z9Pr-D12 Series Specifications Summary

    Z9PR-D12 series specifications summary Model Name Z9PR-D12 Z9PR-D12C Processor Support / System Bus 2 * Socket 2011 Intel® Xeon® processor E5-2600 product family QPI 6.4/ 7.2/ 8.0 GT/s Core Logic Intel® C602-A PCH Form Factor EEB, 12” x 13” ASUS...
  • Page 13 CPU Temperature FAN RPM Environment Operation temperature: 10°C – 35°C Non operation temperature: -40°C – 70°C Non operation humidity: 20% – 90% (Non condensing) *Refer to ASUS Server AVL for latest update. **Specifications are subject to change without notice. xiii...

  • Page 15: Chapter 1: Product Introduction

    This chapter describes the motherboard features and the new technologies it supports. Product introduction...
  • Page 16 Chapter summary Welcome! ..................1-3 Package contents ................. 1-3 Serial number label ..............1-4 Special features ................1-4 ASUS Z9PR-D12 Series...

  • Page 17: Welcome

    ® The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

  • Page 18: Serial Number Label

    Serial number label For faster and quicker troubleshooting solutions from the ASUS Technical Support team, provide the product’s serial number containing 12 characters such as xxS2xxxxxxxx as shown in the figure below. Z9PR-D12 Made China 合格 xxS2xxxxxxxx Special features 1.4.1...
  • Page 19 The motherboard supports the Serial ATA III technology through the Serial ATA interface and Intel C602 chipset, delivering up to 6Gb/s data transfer rates. ® Additionally, get enhanced scalability, faster data retrieval, double the bandwidth of current bus systems. ASUS Z9PR-D12 Series...

  • Page 20: Innovative Asus Features

    PIKE (Proprietary I/O Kit Expansion) PIKE is an on-demand upgrade kit for users. This ASUS unique feature enables users to choose their preferred I/O solutions. ASUS provides multiple SAS solutions for different segments and purposes and PIKE saves lots of validation efforts and hardware cost for end users.

  • Page 21: Chapter 2: Hardware Information

    This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. Hardware Chapter 2: information...
  • Page 22 Chapter summary Before you proceed ..............2-3 Motherboard overview ..............2-4 Central Processing Unit (CPU) ........... 2-9 System memory ................. 2-14 Expansion slots ................2-17 Onboard LEDs ................2-21 Jumpers ..................2-23 Connectors ................. 2-27 ASUS Z9PR-D12 Series...

  • Page 23: Before You Proceed

    The motherboard comes with a standby power LED. The green LED lights up to indicate that the system AC power cable is plugged or not plugged. This is a reminder that you should shut down the system and unplug the power cable before removing or installing any motherboard component. ASUS Z9PR-D12 Series...

  • Page 24: Motherboard Overview

    Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. To optimize the motherboard features, we highly recommend that you install it in an ATX 2.2 compliant chassis. Unplug the chassis power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components! 2.2.1...

  • Page 25: Motherboard Layout

    2.2.3 Motherboard layout Z9PR-D12 ASUS Z9PR-D12 Series...
  • Page 26 Z9PR-D12C Chapter 2: Hardware information...

  • Page 27: Layout Contents

    PS/2 mouse port (green) 2-27 DM_LAN 1 (RJ-45) port 2-27 PS/2 keyboard port (purple) 2-27 USB 2.0 ports 1 and 2 2-27 Video Graphics Adapter port 2-27 LAN 1 (RJ-45) port 2-27 LAN 2 (RJ-45) port 2-27 ASUS Z9PR-D12 Series...
  • Page 28 Internal connectors Page Serial ATA 6.0/3.0 Gb/s connectors 2-28 (7-pin SATA6G 1–2 [Blue]; 7-pin SATA3G 3–6 [Black]) SAS connectors-ISAS connectors 2-29 (7-pin ISAS1–4 [Gray]) SAS connectors- PSAS connectors 2-29 (7-pin PSAS1–8 [Light Blue]) Hard disk activity LED connector (4-pin HDLED1) 2-30 USB connectors (10-1 pin USB34, USB56;...

  • Page 29: Central Processing Unit (Cpu)

    ASUS will shoulder the cost of repair only if the damage is shipment/transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA2011 socket.
  • Page 30 Press the left load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Load lever To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. Slightly lift the load lever in the direction of the arrow.
  • Page 31 The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! Remove the PnP cap (H) from the CPU socket and close the load plate (I). ASUS Z9PR-D12 Series 2-11...
  • Page 32 Push down the right load lever (J), ensuring that the edge of the load plate is fixed by the lever (K). Insert the right load lever under the retention tab. 10. Push down the left load lever (L), and then insert the lever under the retention tab (M).
  • Page 33 12. Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN1 / CPU_FAN2. DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. ASUS Z9PR-D12 Series 2-13...

  • Page 34: System Memory

    • • • • • *Refer to ASUS Server AVL for the latest update. • Start installing the DIMMs from slot A1 and C1 (light blue). • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor.

  • Page 35: Asus Z9Pr-D12 Series

    • • • • • • • • • 11 DIMMs • • • • • • • • • • • 12 DIMMs • • • • • • • • • • • • ASUS Z9PR-D12 Series 2-15...

  • Page 36: Installing A Dimm On A Single Clip Dimm Socket

    2.4.3 Installing a DIMM on a single clip DIMM socket Press the retaining clip outward to DIMM notch unlock a DIMM socket. Align a DIMM on the socket such that the notch on the DIMM matches the DIMM slot key on the socket.

  • Page 37: Expansion Slots

    When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, resulting to an unstable system and an inoperable card. ASUS Z9PR-D12 Series 2-17...

  • Page 38: Interrupt Assignments

    2.5.3 Interrupt assignments Standard Interrupt assignments Priority Standard function System Timer Keyboard Controller Programmable Interrupt Communications Port (COM2) Communications Port (COM1) Floppy Disk Controller System CMOS/Real Time Clock ACPI Mode when used IRQ Holder for PCI Steering IRQ Holder for PCI Steering PS/2 Compatible Mouse Port Numeric Data Processor Primary IDE Channel...

  • Page 39: Pike Slots

    1 x PCI-E x 8 (Gen3 x8 link) 2.5.6 PIKE slots The PIKE slot allows you to choose and change your preferred SAS solution easily. Install an optional ASUS PIKE RAID card based on your needs. ASUS Z9PR-D12 Series 2-19...

  • Page 40: Installing An Asus Pike Raid Card

    2.5.7 Installing an ASUS PIKE RAID card Follow the steps below to install an optional ASUS PIKE RAID card on your motherboard. Locate the PIKE RAID card slot on the motherboard. Align the golden fingers of the PIKE RAID card with the PIKE RAID card slot.

  • Page 41: Onboard Leds

    Baseboard Management Controller LED (BMC_LED1) (Z9PR-D12 only) The BMC LED works with the ASUS ASMB6 management device and indicates its initiation status. When the PSU is plugged and the system is OFF, ASUS ASMB6 management device starts system initiation for about one (1) minute.
  • Page 42 CATT Error LED (CATTERR_LED1) Indicates that the system has experienced a fatal or catastrophic error and cannot continue to operate. Location LED (LOCLED2) This LED allows you to know the server location. 2-22 Chapter 2: Hardware information...

  • Page 43: Jumpers

    Removing the cap will cause system boot failure! If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery. ASUS Z9PR-D12 Series 2-23...
  • Page 44 VGA controller setting (3-pin VGA_EN1) This jumper allows you to enable or disable the onboard VGA controller. Set to pins 1–2 to activate the VGA feature. LAN controller setting (3-pin LAN_SW1/ LAN_SW2) These jumpers allow you to enable or disable the onboard Intel ®...
  • Page 45 Intel Rapid Storage Technology Enterprise Option ROM Utility. ® ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel Management Engine (ME) boot from recovery mode when ME become corrupted. ASUS Z9PR-D12 Series 2-25...
  • Page 46 DDR3 thermal event setting (3-pin DIMMTRIP1) This jumper allows you to enable/disable DDR3 DIMM thermal sensing event pin. PMBus 1.2 PSU select jumper (3-pin SMART_PSU1) This jumper allows you to select PSU PMBus version, Set to pins 1-2 for PMBus, set to pins 2-3 for Others. 2-26 Chapter 2: Hardware information...

  • Page 47: Connectors

    Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. LAN 2 (RJ-45) port . This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. ASUS Z9PR-D12 Series 2-27...

  • Page 48: Internal Connectors

    DM_LAN1 port LED indications ACT/LINK SPEED Activity/Link LED Speed LED Status Description Status Description No link 10 Mbps connection Orange Linked Orange 100 Mbps connection Blinking Data activity Green 1 Gbps connection DM LAN port LAN port LED indications ACT/LINK SPEED Activity/Link LED Speed LED...
  • Page 49 The actual data transfer rate depends on the speed of SATA hard disks installed. SAS connectors— PSAS connectors (7-pin PSAS1–8 [Light Blue]) Supported by the ASUS PIKE Card, these connectors are for the SAS signal ® cables for SAS hard disk drives that allows up to 6Gb/s of data transfer rate.
  • Page 50 Hard disk activity LED connector (4-pin HDLED1) This LED connector is for the storage add-on card cable connected to the SATA or SAS add-on card. The read or write activities of any device connected to the SATA or SAS add-on card causes the front panel LED to light up.
  • Page 51 DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. • These are not jumpers! DO NOT place jumper caps on the fan connectors! • All fans feature the ASUS Fan Speed Control technology. ASUS Z9PR-D12 Series 2-31...
  • Page 52 Serial General Purpose Input/Output connectors (8-1 pin PSGPIO1/2, ISGPIO1, SGPIO1) The SGPIO 1 connectors are used for the Intel Rapid Storage Technology Enterprise SGPIO interface that controls the LED pattern generation, device information and general purpose data. • The PSGPIO 1/2 connectors are used for PIKE card. •...
  • Page 53 10. TPM connector (20-1 pin TPM1) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. ASUS Z9PR-D12 Series 2-33...
  • Page 54 11. EATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1/EATX12V2) These connectors are for the EATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. •...
  • Page 55 12. Power Supply SMBus connector (5-pin PSUSMB1) This connector allows you to connect SMBus (System Management Bus) to the power supply unit to read PSU information. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. ASUS Z9PR-D12 Series 2-35...

  • Page 56: System Panel Connector

    13. System panel connector (20-1 pin PANEL1) This connector supports several chassis-mounted functions. System power LED (3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
  • Page 57 Connect the Locator LED cables to these 2-pin connector. The LEDs will light up when the Locator button is pressed. Locator Button/Switch (2-pin LOCATORBTN) These leads are for the locator button on the front panel. This button queries the state of the system locator. ASUS Z9PR-D12 Series 2-37...
  • Page 58 2-38 Chapter 2: Hardware information...

  • Page 59: Chapter 3: Powering Up

    This chapter describes the power up sequence, and ways of shutting down the system. Powering up Chapter 3:...
  • Page 60 Chapter summary Starting up for the first time ............3-3 Powering off the computer ............3-4 ASUS Z9PR-D12 Series...

  • Page 61: Starting Up For The First Time

    Check the jumper settings and connections or call your retailer for assistance. At power on, hold down the <Del> key to enter the BIOS Setup. Follow the instructions in Chapter 4. ASUS Z9PR-D12 Series...

  • Page 62: Powering Off The Computer

    Powering off the computer 3.2.1 Using the OS shut down function If you are using Windows 2008 Server: ® Click the Start button, move the cursor to the triangle on the right of Log off, and then click Shut Down. From the Shutdown Event Tracker, select the option that best describes why you want to shut down the computer.

  • Page 63: Chapter 4: Bios Setup

    This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup Chapter 4:...
  • Page 64 Main menu .................. 4-10 Advanced menu ................. 4-11 Server Mgmt menu ..............4-37 Event Logs menu ............... 4-40 Boot menu .................. 4-42 Monitor menu ................4-44 Security menu ................4-45 4.10 Tool menu ................... 4-46 4.11 Exit menu ..................4-47 ASUS Z9PR-D12 Series...

  • Page 65: Managing And Updating Your Bios

    USB flash disk drive when the BIOS file fails or gets corrupted. ASUS EZ Flash 2 : Allows you to update the BIOS using a USB flash disk. BUPDATER utility : Allows you to update the BIOS in DOS mode using a bootable USB flash disk drive.

  • Page 66: Asus Ez Flash 2

    4.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 allows you to update the BIOS without using a DOS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2 Insert the USB flash disk that contains the latest BIOS file to the USB port.

  • Page 67: Bupdater

    Updating the BIOS file To update the BIOS file using BUPDATER: Visit the ASUS website at www.asus.com and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com to the bootable USB flash disk drive you created...
  • Page 68 The utility verifies the file, then starts updating the BIOS file. ASUSTek BIOS Update for DOS V1.06 (09/08/04) FLASH TYPE: MXIC 25L1605A Update ROM Current ROM BOARD: Z9PR-D12 BOARD: Z9PR-D12 VER: 0203 VER: 0206 DATE: 08/24/2011 DATE: 09/30/2011 PATH: WARNING! Do not turn off power during flash BIOS...

  • Page 69: Bios Setup Program

    The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. ASUS Z9PR-D12 Series...

  • Page 70: Bios Menu Screen

    4.2.1 BIOS menu screen Menu items Menu bar Configuration fields General help Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Server Mgmt Event Logs Boot Monitor Security Tool Exit Set the Date, Use Tab to BIOS Information switch between Data elements.

  • Page 71: Menu Items

    A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen. Press the Up/Down arrow keys or <Page Up> /<Page Down> keys to display the other items on the screen. ASUS Z9PR-D12 Series...

  • Page 72: Main Menu

    Main menu When you enter the BIOS Setup program, the Main menu screen appears. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time settings. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Server Mgmt...

  • Page 73: Advanced Menu

    DCU Streamer Prefetcher [Enabled] F2: Previous Values DCU IP Prefetcher [Enabled] F5: Optimized Defaults Intel Virtualization Technology [Enabled] F10: Save & Exit Local APIC Mode [Auto] ESC: Exit Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. ASUS Z9PR-D12 Series 4-11...
  • Page 74 Socket 1 CPU Information Enter to view the CPU Information. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Socket 1 CPU Information Genuine Intel(R) CPU @ 2.60GHz CPU Signature 206d5 Microcode Patch Max CPU Speed 2600 MHz Min CPU Speed 1200 MHz Processor Cores...

  • Page 75: Cpu Power Management Configuration

    Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. Power Technology [Custom] This item allows you to enable power management features. Configuration options: [Disabled] [Energy Efficient] [Custom] EIST [Enabled] This item allows you to enable/disable Intel SpeedStep. Configuration options: [Disabled] [Enabled] ASUS Z9PR-D12 Series 4-13...
  • Page 76 Turbo Mode [Enabled] Configuration options: [Disabled] [Enabled] P-STATE Coordination [HW_ALL] This item allows you to change P-STATE Coordination type. Configuration options: [HW_ALL] [SW_ALL] [SW_ANY] CPU C3 Report [Disabled] This item allows you to enable/disable CPU C3(ACPI C2) report. Configuration options: [Disabled] [Enabled] CPU C6 Report [Enabled] This item allows you to enable/disable CPU C6(ACPI C3) report.

  • Page 77: Chipset Configuration

    Configuration options: [Auto] [6.4 GT/s] [7.2 GT/s (Fast Mode Only)] [8.0 GT/s (Fast Mode Only)] QPI Link0s [Disabled] Configuration options: [Disabled] [Enabled] QPI Link0p [Disabled] Configuration options: [Disabled] [Enabled] QPI Link1 [Enabled] Configuration options: [Disabled] [Enabled] ASUS Z9PR-D12 Series 4-15...
  • Page 78 Memory Configuration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Support for compatibility Compatibility RID [Enabled] Revision ID(CRID) Functionality mentioned in Memory Configuration Sandybridge bios spec. Total Memory 4096 MB (DDR3) Current Memory Mode Independent Currently Memory Speed 1333 MHz Mirroring Not Possible...
  • Page 79 Configuration options: [Disabled] [Enabled] Altitude [300 M] The system altitude above the sea level in meters. Configuration options: [Auto] [300 M] [900 M] [1500 M] [3000 M] Memory Hot sensor support [Enabled] Configuration options: [Disabled] [Enabled] ASUS Z9PR-D12 Series 4-17...

  • Page 80: Dimm Information

    DIMM Information Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced CPU1 DIMM Information Node 0 Ch 0 Dimm A1 Not Present Node 0 Ch 0 Dimm A2 Not Present Node 0 Ch 0 Dimm B1 Not Present Node 0 Ch 0 Dimm B2 Not Present Node 0 Ch 0 Dimm C1...

  • Page 81: Pch Configuration

    SCU devices [Enabled] Allows you to enable/disable Patsburg SCU devices. Configuration options: [Enabled] [Disabled] Onboard SATA RAID Oprom [Enabled] Allows you to enable/disable onboard SATA RAID option rom if Launch Storage Oprom is enabled. Configuration options: [Disabled] [Enabled] ASUS Z9PR-D12 Series 4-19...
  • Page 82 High Precision Event Timer Configuration High Precision Timer [Enabled] Allows you to enable/disable High Precision Event Timer. Configuration options: [Disabled] [Enabled]] Intel(R) VT for Directed I/O Configuration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Enables or Disables BIOS ACPI Intel(R) VT-d [Disabled] Auto Configuration.

  • Page 83: Pch Sata Configuration

    When hard disk read/write errors occur, this feature allows the hard disk to report warning messages during the POST. Configuration options: [Enabled] [Disabled] Aggressive Link Power Management [Enabled] Configuration options: [Enabled] [Disabled] Port 1/2/3/4/5/6 Staggered Spin-up [Disabled] AHCI supports staggered spin-up. Configuration options: [Enabled] [Disabled] ASUS Z9PR-D12 Series 4-21...

  • Page 84: Pch Scu Configuration

    4.4.5 PCH SCU Configuration This menu automatically detects and displays Device 1-4. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Device1 Not Present Device2 Not Present Device3 Not Present Device4 Not Present →←: Select Screen Select Item ↑↓: Enter: Select Item +/-: Change Opt.

  • Page 85: Pci Subsystem Settings

    Configuration options: [Disabled] [Enabled] SERR# Generation [Disabled] Enables or disables PCI device to generate SERR#. Configuration options: [Disabled] [Enabled] Load RT32 Image [Disabled] Enables or disables PCI device to load RT32 image. Configuration options: [Disabled] [Enabled] ASUS Z9PR-D12 Series 4-23...

  • Page 86: Pci Express Settings

    PCI Express Settings Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Enables or DisablesPCI PCI Express Link Register Settings Express Device Relaxed ASPM Support [Disabled] Ordering. WARNING: Enabling ASPM may cause some PCI-E device to fail →←: Select Screen Select Item ↑↓: Enter: Select Item...
  • Page 87 Configuration options: [Disabled] [Enabled] PCIE5 Option Rom [Enabled] Configuration options: [Disabled] [Enabled] PCIE6 Option Rom [Enabled] Configuration options: [Disabled] [Enabled] PCIE7 Option Rom [Enabled] Configuration options: [Disabled] [Enabled] PIKE Option Rom [Enabled] Configuration options: [Disabled] [Enabled] ASUS Z9PR-D12 Series 4-25...

  • Page 88: Intel Txt(Lt-Sx) Configuration

    4.4.7 Intel TXT(LT-SX) Configuration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Intel TXT(LT-SX) Hardware Support CPU:TXT Feature Supported Chipset:TXT Feature Supported Intel TXT(LT-SX)Configuration TXT Support Disabled Intel TXT(LT-SX)Dependencies The following must be supported and enabled. VT-d Support Enabled VT Support Enabled...

  • Page 89: Usb Configuration

    This item sets the time-out value for control, bulk, and interrupt transfer. Configuration options: [1 sec] [5 sec] [10 sec] [20 sec] Device reset time-out [20 sec] USB mass storage device Start Unit command time-out. Configuration options: [10 sec] [20 sec] [30 sec] [40 sec] ASUS Z9PR-D12 Series 4-27...

  • Page 90: Trusted Computing

    USB Ports Configuration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Enable/Disable (EHCI) EHCI Controller 1 [Enabled] Support. EHCI Controller 2 [Enabled] Rear USB #1 [Enabled] Rear USB #2 [Enabled] Onboard USB #3 [Enabled] Onboard USB #4 [Enabled] Onboard USB #5 [Enabled]...

  • Page 91: Acpi Settings

    Allows you to set the ACPI Sleep State. Configuration options: [Suspend Disabled] [S1 (CPU Stop Clock)] [S3 (Suspend to RAM)] Lock Legacy Resources [Disabled] Allows you to enable or disable Lock Legacy Resources. Configuration options: [Disabled] [Enabled] ASUS Z9PR-D12 Series 4-29...

  • Page 92: Whea Configuration

    4.4.10 WHEA Configuration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Enable or disable Windows WHEA Support [Enabled] Hardware Error Architecture. WHEA Support [Enabled] Allows you to enable or disable the Windows Hardware Error Architecture support. Configuration options: [Disabled] [Enabled] 4.4.11 APM setting Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

  • Page 93: Serial Port Console Redirection

    Extended ASCII char set Bits per second [57600] Selects serial port transmission speed. The speed must be matched on the other side. Long or noisy lines may require lower speeds. Configuration options: [9600] [19200] [38400] [57600] [115200] ASUS Z9PR-D12 Series 4-31...

  • Page 94: Console Redirection Settings

    Data Bits [8] Configuration options: [7] [8] Parity [None] A parity bit can be sent with the data bits to detect some transmission errors. [Mark] and [Space] parity do not allow for error detection. [None] No parity bit [Even] parity bit is 0 if the num of 1’s in the data bits is even [Odd] parity bit is 0 if num of 1’s in the data bits is odd [Mark]...
  • Page 95 Configuration options: [9600] [19200] [57600] [115200] Flow Control [None] Microsoft Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through a serial port. Configuration options: [None] [VT100] [Hardware RTS/CTS] [Software Xon/ Xoff] ASUS Z9PR-D12 Series 4-33...

  • Page 96: Onboard Lan Configuration

    4.4.13 Onboard LAN Configuration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Launch INTEL W82574L OpROM Onboard LAN Configuration Intel LAN ROM Type [PXE] Intel LAN1 Enable [Enabled] LAN1 Option ROM Support [Enabled] Intel LAN2 Enable [Enabled] LAN2 Option ROM Support [Enabled] Intel LAN ROM Type [PXE]...

  • Page 97: Me Subsystem

    Serial Port [Enabled] Allows you to enable or disable the serial port. Configuration options: [Disabled] [Enabled] Device Mode [Standard Serial Port Mode] Allows you to change the serial port mode. Configuration options: [Standard Serial Port Mode] ASUS Z9PR-D12 Series 4-35...

  • Page 98: Runtime Error Logging

    4.4.16 Runtime Error Logging Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Runtime Error Logging Support [Disabled] Runtime Error Logging Support [Disabled] This item allows you to enable or disable Runtime Error Logging Support. Configuration options: [Disabled] [Enabled] The following item appears only when you set Runtime Error Logging Support to [Enabled].

  • Page 99: Server Mgmt Menu

    O/S Wtd Timer Policy [Reset] Allows you to configure how the system should respond if the OS Boot Watchdog Timer expires. Not available if O/S Boot Watchdog Timer is disabled. Configuration options: [Do Nothing] [Reset] [Power Down] ASUS Z9PR-D12 Series 4-37...

  • Page 100: System Event Log

    4.5.1 System Event Log Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Server Mgmt Change this to enable or Enabling/Disabling Options disable all features of SEL Components [Disabled] system Event Logging during boot. Erasing Settings Erase SEL [No] When SEL is Full [Do Nothing] Note: All values changed here do not take effect...

  • Page 101: Bmc Network Configuration

    [Static Mode]. Station IP address [0.0.0.0] Allows you to key in Station IP address. Subnet mask [0.0.0.0] Allows you to key in Subnet mask. Gateway IP address [0.0.0.0] Allows you to key in Gateway IP address. ASUS Z9PR-D12 Series 4-39...

  • Page 102: Event Logs Menu

    Event Logs menu The Event Logs allows you to change or view the event log settings. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Server Mgmt Event Logs Boot Monitor Security Tool Exit Press <Enter> to change Change Smbios Event Log Settings the Smbios Event Log configuration.

  • Page 103: View Smbios Event Log

    Enables or disables the converting of EFI Status Codes to Standard Smbios Types (Not all may be translated). Configuration options: [Disabled] [Enabled] View Smbios Event Log Press <Enter> to view all smbios event logs. View System Event Log Press <Enter> to view all system event logs. ASUS Z9PR-D12 Series 4-41...

  • Page 104: Boot Menu

    Full Screen Logo [Enabled] Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Set this item to [Enabled] to use the ASUS MyLogo2™ feature. CSM16 Module Version GateA20 Active [Upon Request] [Upon Request] GA20 can be disabled using BIOS services.
  • Page 105 The number of device items that appears on the screen depends on the number of devices installed in the system. • To select the boot device during system startup, press <F8> when ASUS Logo appears. • To access Windows OS in Safe Mode, please press <F8> after POST.

  • Page 106: Monitor Menu

    Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Server Mgmt Event Logs Boot Monitor Security Tool Exit CPU1 Temperature 56.0ºC/132.8ºF CPU2 Temperature TR1 Temperature...

  • Page 107: Security Menu

    FAN Speed Control [Generic Mode] Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Generic Mode] [High Speed Mode] [Full Speed Mode] Security menu The Security menu items allow you to change the system security settings.

  • Page 108: 4.10 Tool Menu

    Be used to update BIOS ASUS EZ Flash 2 Utility ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash BIOS ROM Utility when you press <Enter>. Check section 4.1.2 ASUS EZ Flash 2 Utility for details. 4-46...

  • Page 109: 4.11 Exit Menu

    Restore Defaults This option allows you to restore/load defaults values for all the setup options. When you select this option or if you press <F5>, a confirmation window appears. Select Yes to load optimized defaults. ASUS Z9PR-D12 Series 4-47...
  • Page 110 Boot Override These items displays the available devices. The device items that appears on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device. Launch EFI Shell from filesystem device This item is for launching the EFI Shell application from one of the available filesystem devices.
  • Page 111 This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. RAID configuration...
  • Page 112 Chapter summary Setting up RAID ................5-3 LSI Software RAID Configuration Utility ........5-5 Intel Rapid Storage Technology enterprise SCU/SATA ® Option ROM Utility ..............5-25 Intel Rapid Storage Technology enterprise Utility ® (Windows) ................... 5-35 ASUS Z9PR-D12 Series...

  • Page 113: Setting Up Raid

    • Please refer to chapter 2 for how to select the RAID configuration utility. Move the jumper to choose between LSI MegaRAID and Intel ® Rapid RAID. ASUS Z9PR-D12 Series...

  • Page 114: Installing Hard Disk Drives

    5.1.2 Installing hard disk drives The motherboard supports Serial ATA for RAID set configuration. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for RAID configuration: Install the SATA hard disks into the drive bays following the instructions in the system user guide.

  • Page 115: Lsi Software Raid Configuration Utility

    LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Management Menu Configure Initialize Objects Rebuild Check Consistency Configure VD(s) Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option ASUS Z9PR-D12 Series...

  • Page 116: Creating A Raid Set

    Menu Description Configure Allows you to create RAID 0, RAID 1 or RAID 10 set using the Easy Configuration or the New Configuration command. This menu also allows you to view, add, or clear RAID configurations or select the boot drive Initialize Allows you to initialize the virtual drives of a created RAID set Objects...
  • Page 117 LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Easy Configuration - ARRAY SELECTION MENU Select Configurable Array(s) Management Menu PORT # Configure DNLIN A00-00 SPAN-1 Initialize Objects DNLIN A00-01 Rebuild Check Consistency Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit ASUS Z9PR-D12 Series...
  • Page 118 Press <F10> again, the virtual drive information appears including a Virtual Drive menu that allows you to change the virtual drive parameters. LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured RAID Size #Stripes StripSz Status...
  • Page 119 Accept SPAN = NO Disk Write Cache Setting Of VD Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option Enabling DWC can improve the performance, but with the risk of data loss. ASUS Z9PR-D12 Series...
  • Page 120 12. When you have finished configuring the selected virtual drive, select Accept from the menu, and then press <Enter>. LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured RAID Size #Stripes StripSz Status Easy Configuration - ARRAY SELECTION MENU Management Menu 148.580GB...

  • Page 121: Using New Configuration

    SPAN = NO Enter VD Size: Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option Follow steps 10 to 14 of the previous section: Using Easy Configuration to create the RAID set. ASUS Z9PR-D12 Series 5-11...

  • Page 122: Adding Or Viewing A Raid Configuration

    5.2.2 Adding or viewing a RAID configuration You can add a new RAID configuration or view an existing configuration using the View/Add Configuration command. Adding a new RAID configuration To add a new RAID configuration: From the Management Menu, select Configure > View/Add Configuration, and then press <Enter>.

  • Page 123: Initializing The Virtual Drives

    LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured Management Menu RAID Size #Stripes StripSz Status Configure Initialize 148.580GB 64 KB ONLINE Objects Rebuild Check Consistency Virtual Drives Virtual Drive 0 Select VD SPACE-(De)Select, F10-Initialize ASUS Z9PR-D12 Series 5-13...
  • Page 124 Press <F10> to start initialization. When prompted, select Yes from the Initialize? dialog box, and then press <Enter>. LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured Management Menu RAID Size #Stripes StripSz Status Configure Initialize...
  • Page 125 LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Vitual Drive(1) Virtual Drive 0 Objects Management Menu Adapter Configure Virtual Drive Initialize Physical Drive Objects Rebuild Check Consistency Select VD Press ENTER To Select A VD, <Del> To Delete A VD ASUS Z9PR-D12 Series 5-15...
  • Page 126 Select Initialize from the pop-up menu, and then press <Enter> to start initialization. LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Vitual Drive(1) Virtual Drive 0 Objects Management Menu Adapter Configure Virtual Drive Initialize Physical Drive Objects Vitual Drive(0) Rebuild...

  • Page 127: Rebuilding Failed Drives

    LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R REBUILD - PHYSICAL DRIVES SELECTION MENU Management Menu PORT # Configure ONLIN A00-00 Initialize Objects FAIL A00-01 Rebuild Check Consistency Port # 1 DISK 77247MB HDS728080PLA380 PF20A60A SPACE-(De)Select,F10-Start Rebuild,F2-Drive Information,F3-View Virtual Drives ASUS Z9PR-D12 Series 5-17...
  • Page 128 After selecting the drive to rebuild, press <F10>. When prompted, press <Y> to rebuild the drive. LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R REBUILD - PHYSICAL DRIVES SELECTION MENU Management Menu PORT # Configure ONLIN A00-00 Initialize Objects...

  • Page 129: Checking The Drives For Data Consistency

    LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured Management Menu RAID Size #Stripes StripSz Status Configure Initialize 148.580GB 64 KB ONLINE Objects Rebuild Check Consistency Virtual Drives Virtual Drive 0 Select VD SPACE-(De)Select, F10-Check Consistency ASUS Z9PR-D12 Series 5-19...
  • Page 130 When prompted, use the arrow keys to select Yes from the Consistency Check? dialog box, and then press <Enter>. LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured Management Menu RAID Size #Stripes StripSz Status Configure...
  • Page 131 Select Check Consistency from the pop-up menu, and then press <Enter>. When prompted, use the arrow keys to select Yes from the dialog box to check the drive. When checking is complete, press any key to continue. ASUS Z9PR-D12 Series 5-21...

  • Page 132: Deleting A Raid Configuration

    5.2.6 Deleting a RAID configuration To delete a RAID configuration From the Management Menu, select Configure > Clear Configuration, and then press <Enter>. LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R Configuration Menu Easy Configuration New Configuration Management Menu Configure...

  • Page 133: Selecting The Boot Drive From A Raid Set

    Select Boot Drive Objects Rebuild Check Consistency Select A Boot VD Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option The virtual drive is selected as boot drive. Press any key to continue. ASUS Z9PR-D12 Series 5-23...

  • Page 134: Enabling Writecache

    5.2.8 Enabling WriteCache You may manually enable the RAID controller’s WriteCache option after creating a RAID set to improve the data transmission performance. When you enable WriteCache, you may lose data when a power interruption occurs while transmitting or exchanging data among the drives. The WriteCache function is recommended for RAID 1 and RAID 10 sets.

  • Page 135: Intel ® Rapid Storage Technology Enterprise Scu/Sata Option Rom Utility

    To use SCU SATA ports: Install all the SATA hard disk drives. Confirm all the SATA hard disk drives you installed are correctly displayed, then reboot system. During POST, press <Ctrl+I> to display the utility main menu. ASUS Z9PR-D12 Series 5-25...
  • Page 136 To enter the Intel ® Rapid Storage Technology enterprise SCU/SATA Option ROM utility: Install all the Serial ATA hard disk drives. Turn on the system. During POST, press <Ctrl+I> to display the utility main menu. Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1104 Copyright(C) 2003-11 Intel Corporation.

  • Page 137: Creating A Raid Set

    Select 2 to 6 disks to use in creating the volume. [ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive. Press <Enter> after completing your selection. ASUS Z9PR-D12 Series 5-27...

  • Page 138: Creating A Recovery Set

    Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0, 10 and 5 only), and then press <Enter>. The available stripe size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB...
  • Page 139 Press <Y> to create the recovery set and return to the main menu, or <N> to go back to the CREATE VOLUME menu. If a recovery set is created, you cannot add more RAID sets even when you have more non-RAID disks installed in your system. ASUS Z9PR-D12 Series 5-29...

  • Page 140: Deleting A Raid Set

    5.3.3 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: From the utility main menu, select 2. Delete RAID Volume and press <Enter>.

  • Page 141: Resetting Disks To Non-Raid

    Use the up/down arrow keys to select the RAID set drive(s) you want to reset, and then press <Space> to select. Press <Enter> to reset the RAID set drives. A confirmation message appears. Press <Y> to reset the drive(s) or press <N> to return to the utility main menu. ASUS Z9PR-D12 Series 5-31...

  • Page 142: Exiting The Intel ® Rapid Storage Technology Utility

    5.3.5 Exiting the Intel Rapid Storage Technology utility ® To exit the utility: From the utility main menu, select 4. Exit, and then press <Enter>. The following warning message appears. CONFIRM EXIT Are you sure you want to exit? (Y/N): Press <Y>...

  • Page 143: Rebuilding The Raid With A New Hard Disk

    SATA Port. Select a destination disk with the same size as the original hard disk. Reboot the system and then follow the steps in section Rebuilding the RAID with other non-RAID disk. ASUS Z9PR-D12 Series 5-33...

  • Page 144: Setting The Boot Array In The Bios Setup Utility

    5.3.7 Setting the Boot array in the BIOS Setup Utility You can set the boot priority sequence in the BIOS for your RAID arrays when creating multi-RAID using the Intel Rapid Storage Technology. ® To set the boot array in the BIOS: To be able to boot from the hard disk, create at least one bootable array.

  • Page 145: Intel ® Rapid Storage Technology Enterprise Utility (Windows)

    Your storage system is configured for data protection, increased performance and optimal data storage capacity. You can create additional volumes to further optimize your storage system. You can click Rescan to re-scan any attached hard disks. ASUS Z9PR-D12 Series 5-35...

  • Page 146: Creating A Raid Set

    5.4.1 Creating a RAID set To create a RAID set: From the utility main menu, select Create Volume and select volume type. Click Next. Enter a name for the RAID set, then select the array disks. Select Volume Size tab, you can drag the bar to decide the volume size. Click Next.

  • Page 147: Volume Properties

    Wait until the process is completed, then click OK when prompted. You still need to partition your new volume using Windows Disk Management before adding any data. The RAID set is displayed in the Volumes list and you can change the settings in Volume Properties. ASUS Z9PR-D12 Series 5-37...

  • Page 148: Changing A Volume Type

    5.4.2 Changing a Volume Type To change the volume type in Volume Properties: Click the SATA array items you want to change in Volumes field. From the Volume Properties field, select Type:RAID 1 Change type. You can change the Name, Select the new volume type, and Select additional disks to include in the new volume if needed.

  • Page 149: Deleting A Volume

    Volumes field you want to delete. Select Delete volume in Volume Properties field. The following screen appears. Click Yes to delete the volume and return to the utility main menu, or click No to return to the main menu. ASUS Z9PR-D12 Series 5-39...

  • Page 150: Preferences

    5.4.4 Preferences System Preferences Allow you to set to show the notification area icon and show system information, warning, or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings •...

  • Page 151: Chapter 6: Driver Installation

    This chapter provides the instructions for installing the necessary drivers for different system components. Driver Chapter 6: installation...
  • Page 152 Intel C600 Series Chipset SCU SATA RAID Drivers ....6-25 ® Intel Rapid Storage Technology enterprise 3.0 installation . 6-26 ® Intel WG82574L Gigabit Adapters Driver installation .... 6-29 ® Management applications and utilities installation ....6-33 ASUS Z9PR-D12 Series...

  • Page 153: Raid Driver Installation

    <Enter> to enter the sub-menu. C600 INTEL RAID Driver C600 INTEL RAID Driver Windows 32 bit (AHCI / AHCI RAID) Windows 64 bit (AHCI / AHCI RAID) Windows 32 bit (SCU RAID) Windows 64 bit (SCU RAID) Back Exit ASUS Z9PR-D12 Series...
  • Page 154 LSI 2008 SAS2 Driver LSI 2008 SAS2 Driver Windows XP 32 bit Windows XP 64 bit Windows Server 2003 32 bit Windows Server 2003 64 bit Windows Vista 32 bit Windows Vista 64 bit Windows Server 2008 32 bit Windows Server 2008 64 bit Windows 7 32 bit Windows 7 64 bit Windows Server 2008 R2 64 bit...
  • Page 155 Insert a blank formatted high-density floppy disk to the USB floppy disk drive. Type dd if=XXX.img of=/dev/fd0 to decompress the file into the floppy disk from the following path in the support DVD: For LSI MegaRAID Driver \Drivers\C600 LSI RAID\Driver\makedisk\Linux Eject the floppy disk. ASUS Z9PR-D12 Series...

  • Page 156: Installing The Raid Controller Driver

    6.1.2 Installing the RAID controller driver During Windows Server 2008 OS installation ® To install the RAID controller driver when installing Windows Server 2008 OS ® Boot the computer using the Windows Server 2008 OS installation disc. ® Follow the screen instructions to start installing Windows Server 2008. When prompted to choose a type of installation, click Custom (advanced).
  • Page 157 When the system finishes loading the RAID driver, replace the motherboard Support DVD with the Windows Server installation disc. Select the drive to install Windows and click Next. Setup then proceeds with the OS installation. Follow screen instructions to continue. ASUS Z9PR-D12 Series...
  • Page 158 Red Hat Enterprise Linux OS 5.6 ® To install the LSI MegaRAID controller driver when installing Red Hat Enterprise ® Boot the system from the Red Hat OS installation CD. ® At the boot:, type linux dd noprobe=ata1 noprobe=ata2..., then press <Enter>.
  • Page 159 When the installation is completed, DO NOT click Reboot. Press <Ctrl> + <Alt> + <F2> to switch to the command-line interface from graphic user interface. Type the following commands when using a Legacy floppy. mkdir /mnt/driver mount /dev/fd0 /mnt/driver cd /mnt/driver sh replace_ahci.sh reboot ASUS Z9PR-D12 Series...
  • Page 160 Red Hat Enterprise Linux OS 6.1 ® To install the LSI MegaRAID controller driver when installing Red Hat Enterprise ® Boot the system from the Red Hat OS installation CD. ® Press <Tab> to edit options. Entering the following command at the boot: linux dd blacklist=isci blacklist=ahci nodmraid, then press <Enter>.
  • Page 161 You have multiple devices which could serve as source for a driver disk. Choose one you like to use and select OK, then press <Enter>. Driver Disk Sou8rce You have multiple devices which could serve as source for a driver disk. Which would you like to use? Cancel ASUS Z9PR-D12 Series 6-11...
  • Page 162 Insert the Red Hat Enterprise RAID driver disk to the USB floppy disk drive, ® select OK, then press <Enter>. Insert Driver Disk Insert your driver disk into /dev/sdb and press “OK” to continue. Back The drivers for the RAID card are installed to the system. When asked if you will load additional RAID controller drivers, select No, then press <Enter>.
  • Page 163 -o loop [image file name] image Example: mount -o loop megasr-15-15.00.0120.2012-1-sles11- ga-x86__64.img image Copy the contents of the image directory, labeled as 01, into a FAT32 USB drive. Rename the 01 folder to CD Image. ASUS Z9PR-D12 Series 6-13...
  • Page 164 SUSE Linux 11 OS To install the LSI MegaRAID controller driver when installing SUSE Linux Enterprise Server OS: Boot the system from the SUSE OS installation CD. Use the arrow keys to select Installation from the Boot Options menu. Press <F6>, then select Yes from the menu. Press <Enter>. 6-14 Chapter 6: Driver installation...
  • Page 165 When below screen appears, select the USB floppy disk drive (sda) as the driver update medium. Select OK, then press <Enter>. Please choose the Driver Update medium. sda: USB Floppy Other device Back Select Back and follow the onscreen instructions to finish the installation. ASUS Z9PR-D12 Series 6-15...

  • Page 166: Intel ® Chipset Device Software Installation

    ® Intel chipset device software installation This section provides the instructions on how to install the Intel ® chipset device software on the system. You need to manually install the Intel chipset device software on a Windows ® operating system. To install the Intel ®...
  • Page 167 Select Yes to accept the terms of the License Agreement and continue the process. Read the Readme File Information and press Next to continue the installation. After completing the installation, click Next to complete the setup process. ASUS Z9PR-D12 Series 6-17...
  • Page 168 Select Yes, I want to restart my computer now and click Finish to restart your computer before using the program. 6-18 Chapter 6: Driver installation...

  • Page 169: Intel Network Connections Software Installation

    DVD to locate the file ASSETUP.EXE from the BIN folder. Double- click the ASSETUP.EXE to run the DVD. Click the Intel Network Connections Software to begin installation. ® Click Install Drivers and Software option to begin installation. ASUS Z9PR-D12 Series 6-19...
  • Page 170 Click Next when the Intel(R) Network Connections–InstallShield Wizard window appears. Select Modify and then click Next to continue. Click the Intel(R) PROSet for Windows Device Manager box, and then click Next to start the installation. 6-20 Chapter 6: Driver installation...
  • Page 171 Follow the screen instructions to complete installation. When finished, press Finish to continue. ASUS Z9PR-D12 Series 6-21...

  • Page 172: Vga Driver Installation

    VGA driver installation This section provides the instructions on how to install the ASPEED Video Graphics Adapter (VGA) driver. You need to manually install the ASPEED VGA driver on a Windows operating ® system. To install the ASPEED VGA driver: Restart the computer, and then log on with Administrator privileges.
  • Page 173 Toggle I accept the terms in the license agreement and click Next to continue. Enter the user information and click Next to continue. Select a setup type and click Next to continue. ASUS Z9PR-D12 Series 6-23...
  • Page 174 Click Install to start driver installation. When the installation completes, click Finish to restart your computer before using the program. 6-24 Chapter 6: Driver installation...

  • Page 175: Intel ® C600 Series Chipset Scu Sata Raid Drivers

    DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. Click the item Intel C600 Series Chipset SCU SATA RAID Drivers from the ® menu, and then follow the onscreen instructions to complete the installation. ASUS Z9PR-D12 Series 6-25...

  • Page 176: Intel ® Rapid Storage Technology Enterprise 3.0 Installation

    ® Intel Rapid Storage Technology enterprise 3.0 installation This section provides the instructions on how to install the Intel ® Rapid Storage Technology enterprise 3.0 on the system. You need to manually install the Intel Rapid Storage Technology enterprise 3.0 ®...
  • Page 177 Read the Warning message and click Next to continue. Read the License Agreement and click Yes to continue. Read the Readme File Information and click Next to continue. ASUS Z9PR-D12 Series 6-27...
  • Page 178 After completing the installation, click Next to complete the setup process. Select Yes, I want to restart my computer now and click Finish to restart your computer before using the program. 6-28 Chapter 6: Driver installation...

  • Page 179: Intel ® Wg82574L Gigabit Adapters Driver Installation

    If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file AUTORUN.EXE and double-click the AUTORUN.EXE and follow step 4 to run the installation. Click Intel WG82574L Gigabit Adapters Driver. ® ASUS Z9PR-D12 Series 6-29...
  • Page 180 When the Intel PRO Network Connections – InstallShield Wizard window ® appears, click Next to start the installation. Select Modify and then click Next to continue. 6-30 Chapter 6: Driver installation...
  • Page 181 Select the programs you want to install and click Next to continue. Click Install to start the installation. ASUS Z9PR-D12 Series 6-31...
  • Page 182 The programs you select are being installed. Click Finish to finish the installation. 10. Restart your computer before using the program. 6-32 Chapter 6: Driver installation...

  • Page 183: Management Applications And Utilities Installation

    The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for updates. 6.8.1 Running the support DVD Place the support DVD to the optical drive.

  • Page 184: Utilities Menu

    Intel RAID driver disks. 6.8.5 Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. 6-34 Chapter 6: Driver installation...

  • Page 185: Appendix: Reference Information

    This appendix includes additional information that you may refer to when configuring the motherboard. Reference information Appendix:...

  • Page 186: A.1 Z9Pr-D12 Block Diagram

    Appendix summary Z9PR-D12 block diagram .............A-3 Z9PR-D12C block diagram ............A-4 ASUS Z9PR-D12 Series...

  • Page 187: Z9Pr-D12 Block Diagram

    Z9PR-D12 block diagram ASUS Z9PR-D12 Series...

  • Page 188: Z9Pr-D12C Block Diagram

    Z9PR-D12C block diagram Appendix A: Reference information...

  • Page 189: Asus Contact Information

    800 Corporate Way, Fremont, CA 94539, USA +1-510-608-4555 Web site http://usa.asus.com Technical Support Support fax +1-812-284-0883 General support +1-812-282-2787 Online support http://support.asus.com/techserv/techserv.aspx ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany +49-2102-959911 Web site http://www.asus.de Online contact http://www.asus.de/sales Technical Support Telephone +49-1805-010923*...

This manual is also suitable for:

Z9pr-d12c

Table of Contents