(excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
Printing Before you print, make sure your printer is set up and its software is installed as described on the Start Here sheet. Loading Paper 1. Open the output tray and its extension. 2. Insert your paper against the right edge of the sheet feeder, behind the tab.
■ Choose the right printer settings. Your printer automatically adjusts itself for each type of paper. That’s why printer settings are important. They tell your printer what kind of paper you’re using and what type of print you want. Make sure you check your printer settings every time you print.
Page 7
Best Photo: Note: For more information about printer settings, click the ? or Help button. The Quality Option settings on this screen give you the best combination of quality and speed for most prints. For the highest quality (Photo RPM papers, click the Advanced button.
3. Press the locking tab, and slide the left edge guide against the paper (but not too tightly). 4. Start your photo program and open your photo file. Printing paper button on your printer. ® Ink Glossy Photo Click to cancel printing...
Page 9
5. From the File menu, click Select your printer here 6. Click the Properties button, click it. Then click Options next screen.) 7. Select the following in the printer settings window: Borderless Photo paper type 4 x 6 in is automatically selected Orientation 8.
At the Print window, click Selecting the Correct Paper Type Your printer automatically adjusts itself for the type of paper you select in your print settings. That’s why the paper Type setting is so important. It tells your printer what kind of paper you’re using and adjusts the ink coverage accordingly.
Then see “Problems and Solutions” on page 12. Checking the Printer’s Lights If the printer’s lights come on or flash, there may be a problem with your printer. Check the table below to diagnose the problem.
Turn the printer back on. If the lights are still on, contact your dealer or Epson as described on your Start Here sheet. The printer may have an internal error. Turn off the printer, wait a few seconds, and turn it on again.
Page 13
If one side of the paper will contain a lighter image or text, print that side first to prevent marks or smudging. ■ If ink smears on the back of a printout, clean the inside of the printer as described in your on-screen User’s Guide. ■...
Page 14
■ Store paper flat to prevent curling. Too many copies are printing. Make sure that the Copies option in your printer software or program is not set for multiple copies. The printer prints blank pages. ■...
Page 15
Make sure your printer is selected in your software. ■ If you’re using a switch box or USB hub with your printer, connect the printer directly to your computer. Then try printing again. You don’t see the printer icon in the lower right corner of your screen ®...
Select Note: If you don’t see the printer icon, see page 15 for instructions on making it appear. 3. Follow the instructions on the screen to clean the print head. Cleaning takes about 40 seconds. The printer makes noise and the green power light flashes.
Notices System Requirements To use your printer and its software, your system should have: ■ ® A Microsoft Windows compatible PC with a Pentium recommended ■ Microsoft Windows 98, Windows Me, Windows 2000, or Windows XP ■ At least 64MB RAM (128MB recommended) ■...
Do not let the power cord become damaged or frayed. ■ If you use an extension cord with the printer, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating.
If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the printer. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Trade Name: Epson Type of Product: Ink Jet Printer Model: B241B NERGY As an E Partner, Epson has determined that this NERGY product meets the E NERGY efficiency. The EPA E NERGY program is a voluntary partnership with the computer and...
If your printer is being repaired, Epson will direct you to send your printer to Epson or its authorized service center, where the printer will be fixed and sent back to you.
Page 23
Epson Authorized Servicer. If a claimed defect cannot be identified or reproduced, you will be held responsible for the costs incurred.