5. SEIKO EPSON CORPORATION shall not be liable for any damage, loss or injury due to improper use of this product, usage in a manner other than as described in this document, or repair or modification by any party other than EPSON or a third party authorized by EPSON.
3.2 For Macintosh...10 4 Using EMP Link 21L ... 11 4.1 Starting EMP Link 21L (for Windows)...11 4.2 Starting EMP Link 21L (for Macintosh) ...11 4.3 Using the toolbar ...12 4.4 Exiting EMP Link 21L (for Windows) ...16 4.5 Exiting EMP Link 21L (for Macintosh)...16 5 If a Problem Occurs ...
1 About EMP Link 21L 1.1 What is EMP Link 21L? EMP Link 21L is an application to control a SEIKO EPSON projector connected to your computer. Basically, the application provides the following two functions. • Controlling the projector From the connected computer, you can control the projector and change various settings of images projected from the projector.
Windows XP Home Edition Note: When using EMP Link 21L with a USB port, you need to separately install a dedicated driver (EPSON Projector USB-COM Driver). For details on the EPSON Projector USB-COM Driver, refer to Appendix A, “EPSON Projector USB-COM Driver” in this manual.
1.4 How to use this manual This manual illustrates how to operate EMP Link 21L using Windows 98 as an example. If your operating system is not Windows 98, then the screen shots shown in this manual may be different from what you actually see on your computer.
2 Installing EMP Link 21L This section describes how to install EMP Link 21L. 2.1 For Windows Follow the procedure below to install EMP Link 21L. Make sure to exit any application that is still running. 1. Double-click the downloaded file EMPLink21LSetup.exe.
Page 8
Click [Next] to continue the installation procedure, or [Cancel] to cancel 5. When the InstallShield Wizard Complete screen appears, click [Finish]. The installation procedure is completed. There is no need to restart the PC. 2 Installing EMP Link 21L EPSON EMP Link 21L User’s Guide 8...
4. Specify an installation destination folder. When you open the desired folder and click [Install], EMP Link 21L is installed into this folder. If you want to cancel the installation procedure, click [Cancel]. 5. When the “Installing is completed. Restart Macintosh.” message appears, click [OK].
3. Double-click [Add/Remove Programs]. 4. Click [EPSON EMP Link 21L]. 5. Click the [Add/Remove] button. 6. Follow the instructions on the screen to un-install EMP Link 21L. The un-installation procedure is completed. 3.2 For Macintosh Follow the procedure below to un-install EMP Link 21L from Macintosh.
4.1 Starting EMP Link 21L (for Windows) When Windows starts up, EMP Link 21L starts at the same time and becomes available on the task tray all the time. To display the EMP Link 21L screen (toolbar and dialog box), double-click task tray.
4. Click [Device Manager]. 5. Double-click [Ports (COM & LPT)]. Show Dialog ShortCut Specify a shortcut key to use to display the EMP Link 21L screen. The following keys or key combinations are available. By default, no shortcut key is used (OFF). Windows:...
Page 13
Sound volume adjustment Adjust the sound volume of the projector. Vertical keystone adjustment Adjust the vertical keystone of the projector, which corrects any distortion in the vertical direction of images projected from the projector. Horizontal keystone adjustment Adjust the horizontal keystone of the projector, which corrects any distortion in the horizontal direction of images projected from the projector.
Page 14
Clicking this button displays the following screen to set up a user logo. You can select a file, adjust its zoom ratio, and then send it to the projector as a user logo. Note: This function is not supported depending on projector model you use.
Page 15
Note: This button is not supported depending on projector model you use. A/V Mute button Use this button to enable or disable the A/V Mute function of the projector. The button functions in the same way as the [A/V Mute] button on the panel of the projector.
4.4 Exiting EMP Link 21L (for Windows) Right-click the EMP Link 21L's icon [Exit]. 4.5 Exiting EMP Link 21L (for Macintosh) From the [File] menu, select [Quit]. on the task tray to display the menu. From the menu, select EPSON EMP Link 21L User’s Guide 16...
Reason 1 The projector is not connected properly, or the projector is turned off. Solution Make sure the cable is correctly connecting the projector to your computer. Also, make sure the projector is turned on. Reason 2 The projector does not support EMP Link 21L.
Appendix A About the EPSON Projector USB-COM Driver If you use a USB cable to connect the projector to a Windows PC, you need to install the EPSON Projector USB-COM Driver on the PC before using EMP Link 21L. For Macintosh, when you install EMP Link 21L, the EPSON Projector USB-COM Driver is also installed automatically.
This section explains how to install the EPSON Projector USB-COM Driver. For Windows PC Follow the procedure below to install the EPSON Projector USB-COM Driver. Make sure to exit any application that is still running. 1. Double-click the downloaded file Setup.exe.
Page 20
3. When the following screen appears, the installation procedure is completed. Click [Finish] and then restart the PC. For Macintosh For Macintosh, when you install EMP Link 21L, the EPSON Projector USB-COM Driver is also installed automatically. Therefore, no further installation is required. EPSON EMP Link 21L User’s Guide 20...
6. Follow the instructions on the screen to un-install the EPSON Projector USB-COM Driver. The un-installation procedure is completed. For Macintosh 1. Drag and drop the EPSON VCOM Driver in [System Folder] – [Extensions] to the Trash. 2. Select [Empty trash...] from the [Special] menu. The un-installation procedure is completed.