Page 1
Gas Requirements Leak T÷stin 9 ....9-11 Using the GHH Ro_i_!s_de B,Jmet u _ag_ ..... 12-15 Lighting the GHH ..... Care & Maintenance ....Befe;re You Call T_oub_e Shoot_ng .....17-18 Vidt the Rrigidaire Web Site at: Warranty ......READ AND SAVE THESE INSTRUCTIONS - MADE IN THE U.SoAo GL51LPDCEN 4t04...
Page 2
Congratulations on your purchase of a new gas grill! At Electrolux Home Products, are very proud of our product and are completely committed to providing you with the best service possible. Your satisfaction is our number one priority. We know you'll enjoy your new gas grill and Thank You for choosing our product.
IMPORTANT SAFETY INFORMATION - Read this manual carefully before using your grill to reduce the risk of bum hazard or fil_, other injury. - Extreme cam should be used because of the high telnperatures produced by this appliance. CHILDREN SHOULD NOT BE LEFT UNATTENDED IN AN AREA WHERE THE ()RILL IS BEING OPERATED.
Page 4
Warming shelf Roll top grill hood Infrared back burner Grilling/Cooking surface Side Shelf Electronic ignitors: main, rear infrared & side burner Control knob: back infrared burner Cart w/doors Control knobs: main burners Drip Pans Warming drawer Side Burner tlandle Control knob:side burner Control...
Page 5
Note: Prior to assembly remove protective film from stainless steel parts Battery : ii I Fig. 1 Spring Assembly Cylinder Bracket Ignitor Attachment Fig. 2 Remove the ignitor cap, spring assembly, bat- tery and lock nut from ignitor. (See Fig. Insert the threaded section...
Page 6
,t ¸ Side Shelf/Si :le Burner Assembly Side Shelf and Side Burner Attachment Loosen the bolts on the side of'the grill and attach the shell" by allowing the bolt heads fall through the large opening in the bottom of" the keyhole slots.
Page 7
Interior parts installation Check to make sure the bottom Flavor Grids are correctly installed in the cutouts around the ignitors, as they may have shifted Fig. 11 during shipment. (See Fig. Bottom Flaw Insert the second row of Flavor Grids into in between burners...
Page 8
For your safety a minimum of 3" clearance from the back of the Grill to non-combustible construction required. You should allow at least 6" side clearance to non-combustible construction. The Frigidaire Grill can be placed directly adjacent to non-combustible construction below the cooking surface.
Page 9
1/2"Min. GFI Electrical outlet for rotisserie motor (6.5 amp rain.) Floor Support area for grill 35 1/2,, M ax. IGNITOR PLNI'E Opening for INSTALLATION *Required Ignitor cutout for front or side mount counter top 5" _t-i"- > Grill 3"-5" Maximum distance to center of' ignitor button from...
Page 10
General Information Verify the type of gas supply to be used, either Natural Gas (NG) or Liquid Propane (L.P)., and make sure the marking plate (located on the back of the unit) agrees with that of the supply. Note: Never attach an unregulated gas line to the appliance.
Page 11
Frigidaire). This assembly is designed to connect directly to a standard 20 lb. L.P. cylinder. Attach the gas hose assembly to the brass...
Page 12
General Information Although all gas connections on the grill are leaked tested at the factory prior to shipment, a complete tightness check must be pertbrlned at the installation site due to possible mishandling in shipment, or exces- sive pressure unknowingly being applied to the unit.
Page 13
Grill Location Do not use the grill in garages, breezeway, sheds or any enclosed area. Never operate the grill in enclosed areas as this could lead to a carbon monoxide buildup, which could result in iniury or death. Place the grill on a level surface.
Page 14
Back Knob Knob Knob Knob Knob Knob Before Lighting Infrared Warning: Important! Before Lighting... Check the gas supply line tbr cuts, wear or abrasion. Left electric starter Right electric starter Always keep your f:ace and body as f:ar away from the For Main Bmners #2, For Bottom Infiared grill as possible...
Page 15
The grill rotisserie system is designed to cook items fi'om the back using infrared heat. The rotisserie burner is an infi'ared type which provides intense searing radiant heat. Preferred by chefs over other cooking methods, this intense heat is magnificent for searing in the natural juices...
Page 16
Rotisserie Lighting Open the lid. Push and turn the control knob counter clockwise to the "H1Gtt" position. Wait 5 seconds. Then press and hold the electronic ignitor button. You'll hear a snapping sound. If the burner does not light in 4 seconds, turn the control knob to OFF and wait 5 minutes before trying again.
Page 17
aintenance Drip Tray The drip tray located below the grill, inside the cart, should be cleaned periodically to prevent heavy buildup of debris. Note: Allow the drip tray to cool before attempting to clean. Cooking Grates The cooking grates can be cleaned immediately after cooking is completed and after turning off the flame.
Page 18
General Trouble Shooting, You should inspect the burners at least once a year or immediately if any of the following conditions occur: The smell of gas in conjunction with the burner flames appearing yellow. The Grill does not reach temperature. The burners make a popping noise.
Page 19
Problem Solution Check gas connection. Flame is erratic Fuel level may be low. Grill may be in need of cleaning. Check flavor grids and cooking grates for excess build-up. Flare-Ups Ensure Grill is not placed directly in path of wind. Be sure the drip tray is clean.
Troubleshooting section. •The warranty is nontransferable. •The warranty is fbr replacement of defective parts only. Frigidaire will not be responsible for damage resulting from accident, alteration, misuse, abuse, hostile environments, improper installation installation not in accordance with local codes.