Introduction The Xperia™ SmartTags suite uses NFC (Near Field Communication) technology to activate different events on your phone. An "event" is a set of actions associated with a particular SmartTag. Each tag in the suite is pre-configured with an event. When you swipe one of the SmartTags with your phone, the event associated with the tag is activated.
Getting started Turning on the NFC function To get started, you must first turn on the NFC function in your phone so that the phone can recognise NFC tags. To turn on the NFC function From your phone's main application screen, find and tap Settings > More..Mark the NFC checkbox.
Using Xperia™ SmartTags Ready-to-go SmartTag events Colour: Actions at start: Orange Ring signal normal level Media volume level set to 80% Name: WALKMAN application open Listen Music plays Post to Facebook Timeline Actions at end: Media volume level set to 50% Music stops playing Colour: Actions at start:...
Actions at end: Ring signal normal level Wi-Fi off Media volume level set to 50% Colour: Actions at start: Wi-Fi on Loud volume Name: Launch news & weather Home Colour: Actions at start: Black Alarm mode on Silent mode on Name: Wi-Fi off Bedroom...
To scan a SmartTag for the first time Make sure that your phone has the NFC function turned on and that the phone screen is active. Place your phone over the SmartTag so that the phone's NFC detection area touches the tag. Your phone vibrates and a popup window opens. Tap Next.
Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice.