Advertisement
Quick Links
5
JTP70SP
GE
30" Built-In Single Convection Wall Oven
®
23-1/2'' MIN.
Dimensions and Installation Information (in inches)
Cutout depth
KW Rating
240V
4.5
A
208V
3.4
B
Breaker Size
240V
20 Amps
27-1/4'' MIN.
208V
20 Amps
27-5/16'' MAX.
Cutout height
Most 30" Wall Cabinets can be used with this unit.
Note: These ovens are not approved for stackable
installations.
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Recommended
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
cutout location
placed to avoid interference with the handle.
32-1/2"
Installation Information: Before installing, consult
from floor
installation instructions packed with product for
current dimensional data.
Electric wall ovens are not approved for installation
with a plug and receptacle. They must be hard
wired in accordance with installation instructions.
Side-by-side installations require at least 2"
between cutouts.
For answers to your Monogram,
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
800.626.2000.
Junction
box
location
22'' MIN.
Suitable
bracing
to support
runners
GE Profile
or
®
™
service,
®
C L
2 x 4 or
equivalent
runners
21-5/8"
over centerline
of cabinet
(must support 275 lbs.)
29-3/4
Conduit
C
48-1/2"
21
Allow minimum of 21'' for clearance
to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.
C=28-1/4" without trim and 28-3/4" with trim.
Specification Created 5/09
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
5
23-1/2'' MIN.
Cutout depth
Junction
box
location
A
B
22'' MIN.
27-1/4'' MIN.
27-5/16'' MAX.
Cutout height
Recommended
cutout location
32-1/2"
from floor
30
Listed by
Underwriters
Laboratories
320227
Suitabl
bracin
to suppo
runner
Advertisement
Related Manuals for GE JTP70SP
Summary of Contents for GE JTP70SP
- Page 1 Side-by-side installations require at least 2" between cutouts. For answers to your Monogram, GE Profile ® ™ ® appliance questions, visit our website at ge.com or call GE Answer Center service, ® 800.626.2000. 2 x 4 or equivalent runners Suitable bracing 21-5/8"...
- Page 2 Note: 36" radiant and induction cooktops are approved for use over GE 30" single wall ovens only. 30" radiant and induction cooktops are approved for use over GE 30" and GE 27" single wall ovens. Refer to cooktop and wall oven installation information packed with products for current dimensional data.
- Page 3 • Model JTP70SPSS – Stainless steel For answers to your Monogram, GE Profile ® ™ ® appliance questions, visit our website at ge.com or call GE Answer Center service, ® 800.626.2000. JTP70SP Listed by Underwriters Laboratories...