PROPER INSTALLATION This washer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet, you can receive one by visiting www.GEAppliances.com, or by calling 800.GE.CARES (800.432.2737).
WHEN USING THE WASHER I Never reach into washer while it is moving. Wait until the machine has completely stopped before opening the lid. Use this I Do not mix chlorine bleach with ammonia or appliance acids such as vinegar and/or rust remover.
NOTE: When making a selection with any knob, simply point the knob anywhere within the shaded range for that setting. Model WHSE5240 Models WHRE5260 and WHDRE526 Model WSERE526 Model WZRE5260 • Select load size and other wash options •...
COTTONS area. Turn the knob to the MEDIUM setting. Load Size Loosely load clothes no higher than the top row of holes in the washer basket. The water level should just cover the clothes. Adjust the load size accordingly.
Often, detergents are not completely dissolved in very cold water, especially in cooler climates. NOTE: PerfecTemp will not adjust the fill on WARM WASH unless the washer lid is closed. Be sure to start the washer after the lid is closed.
Page 7
I Never pour undiluted liquid chlorine bleach directly onto clothes or into the wash basket. I Do not pour powdered bleach into bleach dispenser. Before starting the washer, pour measured amount of bleach directly into bleach dispenser. Avoid splashing or over-filling dispenser. If you prefer to use powdered bleach, add it into the wash basket with your detergent.
Loading the Washer Load dry items loosely, no higher than the top row of holes in the washer basket. When loading wet items make sure you set the load/water level high enough to allow the items to move freely. Water level should just cover the clothes.
For more information, visit www.GEAppliances.com, or call 800.GE.CARES (800.432.2737). Do not store the washer where it will be exposed to the weather. Long Vacations: Be sure water supply is shut off at faucets.
• Turn off the water source and remove the water connection hoses from the upper back of the washer. Use a brush or toothpick to clean the screens in the machine. Reconnect the hoses and turn the water back on.
Page 11
• Close lid and reset cycle, to the beginning if necessary. • Check house circuit breakers/fuses. Replace fuses or reset breaker. Washer should have separate outlet. • Unplug washer, wait 2 minutes, plug back in and press START. • Press START.
Page 12
What To Do • While this is not caused by the washer, you can slow the pilling process by washing garments inside out. • Fasten snaps, hooks, buttons and zippers. • Remove loose items like pins, objects in pockets and sharp buttons.
Page 15
The transmission, suspension rod and spring assembly, if any of these parts should fail due From the date of the to a defect in materials or workmanship. GE will also replace the washer lid or cover, original purchase if they should rust under normal operating conditions. During this additional four-year limited warranty, you will be responsible for any labor or related service costs.
Caution must be exercised, since improper servicing may cause unsafe operation. Contact Us If you are not satisfied with the service you receive from GE, contact us on our Website with all the details including your phone number, or write to: General Manager, Customer Relations Register Your Appliance Register your new appliance on-line—at your convenience! Timely product registration will allow for...