Installing
the TV
Cable Box 0nly
Use this hookup
if:
You subscribe
to a cable TV system
that uses scrambled
or
encoded
signals
requiring
a cable box to view
all channels,
and
You do not intend to hook up any other audio or video
equipment
to your TV.
When
all channels
are routed
through
your
cable box, only one
unscrambled
signal
is sent to the TV, so you cannot
use the Twin
View
feature.
If some channels
are scrambled,
but others
are not,
consider
using
the hookup
on page
12 instead.
1
Connect
the coaxial
connector
from
your
cable service
to the
cable box's
IN jack.
2
Using a coaxial cable, connect the cable box's OUT jack to the
TV's VHE/UHE
jack.
CATV cable
VHF/UHF
IN [_OUT
Cable box
To use the cable box
Have the TV tuner
set to channel
3 or 4 (as appropriate)
and then
use the cable box to change channels.
"To use the TV remote control to switch channels on the cable box
Program
the remote control
as necessary. Eor details,
see
"Programming
the Remote
Control"
on page
50.
"Toprevent accidental switching of TV channels
Use the Channel
Eix feature to lock in a channel. The Channel
Eix
feature
is under
the Channel
menu. Eor details,
see "Using
the
Channel
Menu"
on page 40.
13