hit counter script
Asus UP-895MD Series User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. UP-895MD Series
  6. User manual

Asus UP-895MD Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Z97-PRO
Series

Advertisement

Table of Contents
loading

Related Manuals for Asus UP-895MD Series

Summary of Contents for Asus UP-895MD Series

  • Page 1 Z97-PRO Series...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Contents Safety information ...................... vi About this guide ......................vii Z97-PRO specifications summary ................ix Package contents ...................... xv Installation tools and components ................. xvi Chapter 1: Product Introduction Special features..................1-1 1.1.1 Product highlights................ 1-1 1.1.2 Other special features ..............1-2 Motherboard overview ................
  • Page 4 Intel Rapid Storage Technology ..........3-47 Monitor menu ................... 3-48 Boot menu ....................3-51 Tool menu ....................3-58 3.9.1 ASUS EZ Flash 2 Utility ............3-58 3.9.2 ASUS O.C. Profile ..............3-59 3.9.3 ASUS DRAM SPD Information ..........3-60 3.10 Exit menu ....................
  • Page 5 Rapid Storage Technology Option ROM utility ....5-3 ® Creating a RAID driver disk ..............5-7 5.2.1 Creating a RAID driver disk in Windows ........5-7 ® 5.2.2 Installing the RAID driver during Windows OS installation ..5-8 ® Appendices Notices A-1 ASUS contact information ..................A-5...

  • Page 6: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

  • Page 7: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS website The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 8: Conventions Used In This Guide

    Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task.

  • Page 9: Z97-Pro Specifications Summary

    Z97-PRO specifications summary LGA1150 socket for the 4th Generation and New 4th Generation Intel ® Core™ i7/Intel Core™ i5/ Intel Core™ i3, Pentium and Celeron ® ® ® ® processors Supports 22nm CPU Supports Intel Turbo Boost Technology 2.0* ® * The Intel Turbo Boost Technology 2.0 support depends on the CPU types.
  • Page 10 I218-V Gigabit LAN - Dual interconnect between the ® integrated Media Access Controller (MAC) and physical layer (PHY) Speedy Wi-Fi 802.11 a/b/g/n/ac supports dual frequency band 2.4/5 Wireless Data Network ASUS Wi-Fi GO! Utility Bluetooth v4.0 Bluetooth Realtek ALC1150 8-channel high definition audio CODEC ®...
  • Page 11 Z97-PRO specifications summary Intel Z97 Express Chipset - supports ASUS USB 3.0 ® Boost - 6 x USB 3.0/2.0 ports (4 ports at mid-board, 2 ports at rear panel, blue) - 6 x USB 2.0/1.1 ports (4 ports at mid-board, 2 ports at rear...
  • Page 12 - with USB BIOS Flashback Wizard for EZ BIOS download scheduling UEFI BIOS EZ Mode - featuring friendly graphics user interface - ASUS O.C. Tuner - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2 (continued on the next page)
  • Page 13 1 x DisplayPort 1 x HDMI port 1 x DVI-D 1 x RGB 1 x ASUS Wi-Fi GO! module (Wi-Fi 802.11 a/b/g/n/ac and Bluetooth v 4.0) (Optional) Rear Panel I/O Ports 1 x Optical S/PDIF Out port 1 x LAN (RJ45) port 4 x USB 3.0/2.0 ports (blue, bottom port of USB3_56 supports USB...
  • Page 14 64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.7, WfM 2.0, SM BIOS features BIOS 2.7, ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 2, CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Qfan Control, F3 My Favorites, Quick Note, Last Modified Log, F12 PrintScreen function,...

  • Page 15: Package Contents

    Package contents Check your motherboard package for the following items ASUS Z97-PRO motherboard 4 x Serial ATA 6 Gb/s cables 1 x ASUS SLI™ bridge connector 1 x ASUS Q-Shield User manual Support DVD 1 x 2-in-1 ASUS Q-Connector kit 1 x 2T2R dual-band Wi-Fi moving antennas (Wi-Fi 802.11a/b/g/n/ac compliant) (Optional)

  • Page 16: Installation Tools And Components

    Installation tools and components Intel ® LGA1150 CPU Intel LGA1150 compatible CPU Fan ® Philips (cross) screwdriver SATA hard disk drive PC chassis DIMM 1 bag of screws Power supply unit SATA optical disc drive (optional) Graphics card The tools and components in the table above are not included in the motherboard package.

  • Page 17: Chapter 1: Product Introduction

    SATA Express provides faster data transfer speeds of up to 10 Gb/s, allowing your system to catch up with the speed of the SSDs. It also features backward compatibility with up to two SATA drives of the same speed. ASUS Z97-PRO Series...

  • Page 18: Other Special Features

    The motherboard is European Union’s Energy-related Products (ErP) ready, and ErP requires products to meet certain energy efficiency requirement in regards to energy consumptions. This is in line with ASUS vision of creating environment-friendly and energy- efficient products through product design and innovation to reduce carbon footprint of the product and thus mitigate environmental impacts.

  • Page 19: Motherboard Overview

    Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. ASUS Z97-PRO Series...

  • Page 20: Motherboard Layout

    1.2.2 Motherboard layout Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. Chapter 1: Product introduction...

  • Page 21: Layout Contents

    1-41 20. BIOS Flashback button 2-12 21. Power-on button 1-20 22. Thunderbolt header (5-pin TB_HEADER) 1-42 23. Front panel audio connector (10-1 pin AAFP) 1-35 24. Digital audio connector (4-1 pin SPDIF_OUT) 1-35 25. Q-Code LEDs 1-28 ASUS Z97-PRO Series...

  • Page 22: Central Processing Unit (Cpu)

    Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.

  • Page 23: System Memory

    The motherboard comes with eight DDR 3 (Double Data Rate 3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations ASUS Z97-PRO Series...

  • Page 24: Memory Configurations

    Memory configurations You may install 2 GB, 4 GB and 8 GB unbuffered and non-ECC DDR3 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
  • Page 25 • • A_DATA AX3U2933W4G12(XMP) 16GB (4x4GB) 12-14-14-36 1.65V • • • G.SKILL F3-2933C12D-8GTXDG(XMP) 8GB (2x4GB) 12-14-14-35 1.65V • • • G.SKILL F3-2933C12Q-16GTXDG(XMP) 16GB (4x4GB) 12-14-14-35 1.65V • • • CORSAIR CMY16GX3M4A2933C12R(XMP) 16GB(4x4GB) 12-14-14-36 1.65V • • • ASUS Z97-PRO Series...
  • Page 26 DDR3 2800 (O.C.) MHz capability Vendors Part No. Size Chip Chip Timing Voltage DIMM socket Brand support (Optional) AVEXIR AVD3UH28001208G-4BZ1(XMP) 32GB ( 4x 8GB ) 12-14-14-35 1.65V • • • A_DATA AX3U2800W4G12(XMP) 16GB ( 4x 4GB ) 12-14-14-36 1.65V • •...
  • Page 27 • • • (4x4GB) KINGSTON KHX24C11T3K4/32X(XMP) 32GB 9-9-9-24 1.65 • • • (4x8GB) Mushkin 997122R(XMP) 16GB 2400-10-12-12-28 1.65 • • • (2x8GB) Silicon Power SP004GXLYU240NSA(XMP) 2400-11-13-13-32 • • • Transcend TX2400KLN-8GK(XMP) 2400-11-12-11-29 • • • (2x4GB) ASUS Z97-PRO Series 1-11...
  • Page 28 DDR3 2200 (O.C.) MHz capability Vendors Part No. Size Chip Chip Timing Voltage DIMM socket Brand support (Optional) G.SKILL F3-17600CL7D-4GBFLS(XMP) 4G ( 2x 2G ) 7-10-10-28 1.65 • • GEIL GET34GB2200C9DC(XMP) 4GB ( 2x 2GB ) 9-10-9-28 1.65 • • •...
  • Page 29 GEEL316GB1866C9DC(XMP) 16GB ( 2x 8GB ) 1866-9-10-9-28 1.65 • • • KINGSTON KHX1866C9D3K2/8GX(XMP) 8GB ( 2x 4GB ) 1.65 • • • Silicon Power SP004GXLYU186NSA(XMP) 1866-9-11-9-27 • • • Silicon Power SP008GXLYU186NSA(XMP) 1866-9-11-9-27 • • • ASUS Z97-PRO Series 1-13...
  • Page 30 DDR3 1600 MHz capability Vendors Part No. Size Chip Chip NO. Timing Voltage DIMM socket Brand support (Optional) A-DATA AD3U1600W4G11 A-DATA 3WCD-1211A 11-11-11-28 • • • A-DATA AD3U1600W8G11 A-DATA 3WCD-1211A 11-11-11-28 • • • A-DATA ADDU1600W4G11-B A-DATA DWND-1211A 9-9-9-24 • •...
  • Page 31 16GB 1600-9-9- • • • (2x4GB) 9-24 Patriot PV316G160C9K(XMP) 16GB 1600-9-9- • • • (2x8GB) 9-24 SanMax SMD-4G28N1P-16KM ELPIDA J4208BBBG-GN-F 1600 • • • SanMax SMD-4G68HP-16KZ Hynix H5TQ2G83BFRPBC • • • (continued on the next page) ASUS Z97-PRO Series 1-15...
  • Page 32 DDR3 1600 MHz capability Vendors Part No. Size Chip Chip NO. Timing Voltage DIMM socket Brand support (Optional) SanMax SMD-4G68NG-16KK ELPIDA J2108BDBG-GN-F • • • SanMax SMD-8G28NP-16KM ELPIDA J4208BBBG-GN-F 1600 • • • Silicon SP002GBLTU160V02 (XMP) S-POWER 20YT5NG 9-11- • •...
  • Page 33 • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. ASUS Z97-PRO Series 1-17...

  • Page 34: Expansion Slots

    1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description PCIe 2.0 x1_1 slot PCIe 3.0/2.0 x16_1 slot PCIe 2.0 x1_2 slot PCIe 2.0 x1_3 slot PCIe 3.0/2.0 x16_2 slot PCIe 2.0 x1_4 slot...
  • Page 35 – – shared ® Intel EHCI 2 shared – – – – – – – ® HD Audio – – – – – – shared – ASMedia Controller shared – – – – – – (1142) ASUS Z97-PRO Series 1-19...

  • Page 36: Onboard Buttons And Switches

    1.2.6 Onboard buttons and switches Onboard buttons and switches allow you to fine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. Power-on button The motherboard comes with a power-on button that allows you to power up or wake up the system.
  • Page 37 BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from www.asus.com after using the MemOK! function. ASUS Z97-PRO Series 1-21...
  • Page 38 TPU switch With its two-level adjustment functions, the TPU allows you to automatically adjusts the CPU ratio and clock speed for an optimal system performance. • Enable this switch when the system is powered off. • When the TPU switch is set to Enabled (TPU_I: CPU Ratio Boost), the system automatically adjusts the CPU ratio for an enhanced performance.
  • Page 39 • You may change the EPU settings in the software application or BIOS setup program and enable the EPU function at the same time. However, the system will use the last setting you have made. ASUS Z97-PRO Series 1-23...

  • Page 40: Jumpers

    1.2.7 Jumpers Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.
  • Page 41 CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage setting, insert the jumper to pins 1-2. ASUS Z97-PRO Series 1-25...

  • Page 42: Onboard Leds

    1.2.8 Onboard LEDs POST State LEDs The POST State LEDs provide the status of these key components during POST (Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component’s LED stays lit up until the problem is solved. TPU LED (TPU_LED) The TPU LED lights up when the TPU switch is enabled.
  • Page 43 EPU LED (OLED2) The EPU LED lights up when the EPU switch is enabled. USB BIOS Flashback LED (FLBK_LED) The BIOS Flashback LED flashes when you press the BIOS Flashback button for BIOS update. ASUS Z97-PRO Series 1-27...
  • Page 44 EZ XMP LED (XLED1) This LED lights up when you enable the EZ XMP switch is enabled. Q-Code LEDs The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the next page for details. Chapter 1: Product introduction 1-28...
  • Page 45 S3 Resume is stared (S3 Resume PPI is called by the DXE IPL) S3 Boot Script execution Video repost OS S3 wake vector call E4 – E7 Reserved for future AMI progress codes S3 Resume Failed (continued on the next page) ASUS Z97-PRO Series 1-29...
  • Page 46 Code Description S3 Resume PPI not Found S3 Resume Boot Script Error S3 OS Wake Error EC – EF Reserved for future AMI error codes Recovery condition triggered by firmware (Auto recovery) Recovery condition triggered by user (Forced recovery) Recovery process started Recovery firmware image is found Recovery firmware image is loaded Reserved for future AMI progress codes...
  • Page 47 No Console Output Devices are found No Console Input Devices are found Invalid password Error loading Boot Option (LoadImage returned error) Boot Option is failed (StartImage returned error) Flash update is failed Reset protocol is not available ASUS Z97-PRO Series 1-31...
  • Page 48 ACPI/ASL Checkpoints (under OS) Code Description System is entering S3 sleep state System is entering S4 sleep state System is entering S5 sleep state System is waking up from the S3 sleep state System is waking up from the S4 sleep state System has transitioned into ACPI mode.

  • Page 49: Internal Connectors

    SATAEXPRESS than M.2 Socket 3 interface. Refer to section 3.6.4 PCH Storage Configuration of this user guide for more details. • The SATAEXPRESS connector can support one SATA Express device or two SATA devices. ASUS Z97-PRO Series 1-33...
  • Page 50 ASMedia ® Serial ATA 6 Gb/s connectors (7-pin SATA6G_E12) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. • ASMedia storage controller can only support AHCI mode. • These SATA ports are for data drives only. M.2 socket 3 This socket allows you to install an M.2 (NGFF) SSD module.
  • Page 51 • If you want to connect a high-definition or an AC’97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97]. ASUS Z97-PRO Series 1-35...
  • Page 52 USB 3.0 connectors (20-1 pin USB3_12, USB3_34) These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of USB 3.0 including faster data transfer speeds of up to 5 Gb/s, faster charging time for USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0.
  • Page 53 DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
  • Page 54 • The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • The CPU_FAN connector and CHA_FAN connectors support the ASUS FAN Xpert 3 feature. • The CPU fan connector detects the type of CPU fan installed and automatically switches the control modes.
  • Page 55 1000W power or above to ensure the system stability. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. ASUS Z97-PRO Series 1-39...

  • Page 56: System Panel Connector 20-8 Pin Panel

    System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
  • Page 57 Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the extra button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details. ASUS Z97-PRO Series 1-41...
  • Page 58 Thunderbolt header (5-pin TB_HEADER) This connector is for the add-on Thunderbolt I/O card that supports Intel’s Thunderbolt Technology, allowing you to connect up to six Thunderbolt-enabled devices and a DisplayPort-enabled display in a daisy-chain configuration. The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately. T_Sensor connector (2-pin T_SENSOR1) This connector is for the thermistor cable that allows you to monitor the temperature of your motherboard’s critical components and connected devices.

  • Page 59: Chapter 2: Basic Installation

    The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. Install the ASUS Q-Shield to the chassis rear I/O panel. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’...
  • Page 60 Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. Chapter 2: Basic installation...

  • Page 61: Cpu Installation

    2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA155 and LGA1156 sockets on the LGA1150 socket. ASUS Z97-PRO Series...

  • Page 62: Cpu Heatsink And Fan Assembly Installation

    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly Chapter 2: Basic installation...
  • Page 63 To uninstall the CPU heatsink and fan assembly ASUS Z97-PRO Series...

  • Page 64: Dimm Installation

    2.1.4 DIMM installation To remove a DIMM Chapter 2: Basic installation...

  • Page 65: Atx Power Connection

    2.1.5 ATX Power connection ASUS Z97-PRO Series...

  • Page 66: Sata Device Connection

    2.1.6 SATA device connection Chapter 2: Basic installation...

  • Page 67: Front I/O Connector

    2.1.7 Front I/O Connector To install ASUS Q-Connector To install USB 2.0 connector To install front panel audio connector AAFP USB 2.0 To install USB 3.0 connector USB 3.0 ASUS Z97-PRO Series...

  • Page 68: Expansion Card Installation

    2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2: Basic installation 2-10...

  • Page 69: Wi-Fi Antenna Installation (Optional)

    2.1.9 Wi-Fi antenna installation (Optional) Installing the ASUS 2T2R dual band W-Fi antenna Connect the bundled ASUS 2T2R dual band Wi-Fi antenna connector to the Wi-Fi ports at the back of the chassis. IO Shield • Ensure that the ASUS 2T2R dual band Wi-Fi antenna is securely installed to the Wi-Fi ports. • Ensure to install the Bluetooth driver before installing the Wi-Fi GO! software.

  • Page 70: Bios Update Utility

    BIOS update utility USB BIOS Flashback USB BIOS Flashback allows you to easily update the BIOS without entering the existing BIOS or operating system. Simply insert a USB storage device to the USB port then press the USB BIOS Flashback button for three seconds to automatically update the BIOS. To use USB BIOS Flashback: 1. Place the bundled support DVD to the optical drive and install the USB BIOS Flashback Wizard. Follow the onscreen instructions to complete the installation. Insert the USB storage device to the USB Flashback port. • We recommend you to use a USB 2.0 storage device to save the latest BIOS version for better compatibility and stability. • Refer to section 2.3.1 Rear I/O connection for the location of the USB port that supports USB BIOS Flashback. Launch the USB BIOS Flashback Wizard to automatically download the latest BIOS version. Shut down your computer. On your motherboard, press the BIOS Flashback button for three seconds until the Flashback LED blinks three times, indicating that the BIOS Flashback function is enabled.
  • Page 71 • If the light flashes for five seconds and turns into a solid light, this means that the BIOS Flashback is not operating properly. This may be caused by improper installation of the USB storage device and filename/file format error. If this scenario happens, please restart the system to turn off the light. • Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system’s failure to boot up, please contact your local ASUS Service Center. ASUS Z97-PRO Series 2-13...

  • Page 72: Motherboard Rear And Audio Connections

    Motherboard rear and audio connections 2.3.1 Rear I/O connection Rear panel connectors PS/2 keyboard/mouse combo port USB 3.0 ports E12, support ASUS USB 3.0 Boost Turbo Mode. Optical S/PDIF Out port Wi-Fi 802.11 a/b/g/n/ac Bluetooth V4.0 + HS* (Optional) HDMI port DisplayPort VGA port DVI port Intel LAN (RJ-45) port** USB 3.0 ports 56, bottom port supports ® USB BIOS Flashback and USB Charger+.
  • Page 73 No link 10 Mbps connection Orange Linked Orange 100 Mbps connection Orange (Blinking) Data activity Green 1 Gbps connection Orange (Blinking Ready to wake up LAN port then steady) from S5 mode You can disable the LAN controllers in BIOS. Once disabled, the LAN port’s ACT/LINK LED and SPEED LED stop blinking. ASUS Z97-PRO Series 2-15...

  • Page 74: Audio I/O Connections

    *** Audio 2, 4, 6, or 8-channel configuration Port Headset 4-channel 8-channel 6-channel 2-channel Line In Light Blue Line In Line In Line In Front Speaker Out Lime Line Out Front Speaker Out Front Speaker Out Mic In Pink Mic In Mic In Mic In Center/Subwoofer...
  • Page 75 Connect to 2.1 channel Speakers Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers If you are using Windows 8.1 platform, use only the gray audio port for Side Speaker Out in a 6-channel configuration. ASUS Z97-PRO Series 2-17...

  • Page 76: Starting Up For The First Time

    Connect to 7.1 channel Speakers When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the gray port. Starting up for the first time After making all the connections, replace the system case cover. Ensure that all switches are off. Connect the power cord to the power connector at the back of the system chassis.

  • Page 77: Turning Off The Computer

    One continuous beep followed by four Hardware component failure short beeps At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the instructions in Chapter 3. Turning off the computer While the system is ON, press the power button for less than four seconds to put the system on sleep mode or soft-off mode, depending on the BIOS setting. Press the power switch for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. ASUS Z97-PRO Series 2-19...
  • Page 78 Chapter 2: Basic installation 2-20...

  • Page 79: Chapter 3: Bios Setup

    BIOS setup Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system.

  • Page 80: Bios Setup Program

    BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>, POST continues with its routines.

  • Page 81: Ez Mode

    Selects the boot Saves the changes and the button to manually tune the fans device priority resets the system Loads optimized default settings The boot device options vary depending on the devices you installed to the system. ASUS Z97-PRO Series...

  • Page 82: Advanced Mode

    3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To switch from EZ Mode to Advanced Mode, click Advanced Mode or press F7 hotkey. Q-Fan control EZ Tuning Wizard MyFavorite...

  • Page 83: Menu Bar

    This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard’s SATA mode from AHCI to RAID mode. Refer to section 3.2.4 EZ Tuning Wizard for more information. ASUS Z97-PRO Series...

  • Page 84: Hot Keys

    Quick Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. •...

  • Page 85: Qfan Control

    Click to activate DC Mode configured PWM Mode Select a profile to apply to Click to apply the fan setting your fans Click to undo the Click to go back to main menu changes Select to manually configure your fans ASUS Z97-PRO Series...

  • Page 86: Configuring Fans Manually

    Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Click or tap to manually configure your fans To configure your fans: Select the fan that you want to configure and to view its current status. Click and drag the speed points to adjust the fans’...

  • Page 87: Ez Tuning Wizard

    Select the CPU fan type (Box cooler, Tower cooler, or Water cooler) that you installed then click Next. If you are not sure of the CPU fan type, click I’m not sure. The system automatically detects the CPU fan type. Click Next then click Yes to confirm auto-tuning. ASUS Z97-PRO Series...

  • Page 88: Creating Raid

    Creating RAID To create RAID: Press <F11> on your keyboard or click from the BIOS screen to open EZ Tuning Wizard screen. Click RAID then click Next. • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel SATA connectors.

  • Page 89: My Favorites

    My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items. ASUS Z97-PRO Series 3-11...

  • Page 90: Adding Items To My Favorites

    Adding items to My Favorites To add BIOS items: Press <F3> on your keyboard or click from the BIOS screen to open Setup Tree Map screen. On the Setup Tree Map screen, select the BIOS items that you want to save in MyFavorites screen.

  • Page 91: Main Menu

    RTC RAM via the Clear CMOS button. • The Administrator or User Password items on top of the screen show the default [Not Installed]. After you set a password, these items show [Installed]. ASUS Z97-PRO Series 3-13...

  • Page 92: Administrator Password

    Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: Select the Administrator Password item and press <Enter>.

  • Page 93: Ai Tweaker Menu

    Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display other BIOS items. ASUS Z97-PRO Series 3-15...
  • Page 94 Ai Overclock Tuner [Auto] This item allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options: [Auto] Loads the optimal settings for the system. [Manual] Automatically optimizes the CPU ratio and BCLK frequency. [XMP] When the XMP(extreme memory profile) mode is selected, the BCLK frequency and memory parameters will be optimized automatically.
  • Page 95 The value ranges depend on the value you set on BCLK Frequency. ASUS MultiCore Enhancement [Auto] [Auto] This item allows you to maximize the oveclocking performance optimized by ASUS core ratio settings. [Disabled] This item allows you to set to default core ratio settings. CPU Core Ratio [Per Core] This item allows you to set the CPU core ratio limit per core or synchronize automatically to all cores.
  • Page 96 [Keep Current Settings]. EPU Power Saving Mode [Disabled] The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best energy saving condition.

  • Page 97: Dram Timing Control

    Configuration options: [Auto] [1] – [255] DRAM WRITE to READ Delay [Auto] Configuration options: [Auto] [1] – [15] DRAM CKE Minimum Pulse Width [Auto] Configuration options: [Auto] [1] – [15] DRAM CAS# Write Latency [Auto] Configuration options: [Auto] [1] – [31] ASUS Z97-PRO Series 3-19...
  • Page 98 RTL IOL control DRAM RTL Initial Value [Auto] Configuration options: [Auto] [1] - [63] DRAM RTL (CHA_R0D0) [Auto] Configuration options: [Auto] [1] - [63] DRAM RTL (CHA_R0D1) [Auto] Configuration options: [Auto] [1] - [63] DRAM RTL (CHA_R1D0) [Auto] Configuration options: [Auto] [1] - [63] DRAM RTL (CHA_R1D1) [Auto] Configuration options: [Auto] [1] - [63] DRAM RTL (CHB_R0D0) [Auto]...
  • Page 99 Scrambler Setting [Optimized (ASUS)] This item allows you to set the optimized mode to enhance system stability. Configuration options: [Optimized (ASUS] [Default (MRC)] MCH Full Check [Auto] Enable this item to enhance the stability of your system. Disable this item to enhance the DRAM overclocking capability.
  • Page 100 Skew Control Adjust these items may enhance the DRAM overclocking capability and stability. Transmitter Rising Slope [Auto] Configuration options: [Auto] [0] – [31] Transmitter Falling Slope [Auto] Configuration options: [Auto] [0] – [31] Transmitter Control Time [Auto] Configuration options: [Auto] [0] – [31] Receiver Rising Slope [Auto] Configuration options: [Auto] [0] –...
  • Page 101 Use the <+> or <-> keys to adjust the value. The values depend on the CPU installed. DO NOT remove the thermal module. The thermal conditions should be monitored. ASUS Z97-PRO Series 3-23...
  • Page 102 500 KHz with an interval of 50 KHz. DRAM Power Phase Control [Auto] [Optimized] Set to the ASUS optimized phase tuning profile. [Extreme] Set to the full phase mode. Do not remove the thermal module when the extreme mode is selected. The thermal conditions should be monitored.
  • Page 103 Configuration options: [Auto] [Disabled] [Enabled] CPU Integrated VR Fault Management [Auto] Disable this item to prevent tripping the Fully Integrated Voltage Regulator when doing over-voltage. We recommend you to disable this item when overclocking. Configuration options: [Auto] [Disabled] [Enabled] ASUS Z97-PRO Series 3-25...
  • Page 104 CPU Internal Power Configuration CPU Integrated VR Efficiency Management [Auto] This item allows you to improve the power rating when the CPU is in low power state, or make the FIVR (fully integrated voltage regulator work in high performance at all times.
  • Page 105 The following items appear only when you set the CPU Core Voltage to [Offset Mode]. Offset Mode Sign [+] To offset the voltage by a positive value. [–] To offset the voltage by a negative value. ASUS Z97-PRO Series 3-27...
  • Page 106 CPU Core Voltage Offset Use the <+> or <-> keys to adjust the value. The values range from 0.001 V to 0.999 V with a 0.001 V interval. The following item appears only when you set the CPU Core Voltage to [Adaptive Mode]. Additional Turbo Mode CPU Core Voltage [Auto] This item allows you to set the amount of voltage fed to the CPU cores when running in turbo mode.
  • Page 107 PCIE controller and the PCU (power control unit). Increase the voltage to enhance the overclocking capability. You can use the <+> or <-> keys to adjust the value. The values range from 0.001 V to 0.999 V with a 0.001 V interval. ASUS Z97-PRO Series 3-29...
  • Page 108 CPU Analog I/O Voltage Offset Mode Sign [+] To offset the voltage by a positive value. [–] To offset the voltage by a negative value. CPU Analog I/O Voltage Offset [Auto] This item allows you to set the amount of voltage fed to the analog portion of the I/O on the CPU.
  • Page 109 BCLK DN is equal to the falling edge of the BCLK D+. You can use the <+> or <-> keys to adjust the value. The values range from 0.1 V to 1.9 V with a 0.00625 V interval. ASUS Z97-PRO Series 3-31...

  • Page 110: Advanced Menu

    Clock Crossing Voltage [Auto] This item allows you to increase the value of the clock crossing voltage when the rising edge of the BCLK DN is equal to the falling edge of the BCLK D+. You can use the <+> or <-> keys to adjust the value.

  • Page 111: Cpu Configuration

    Configuration options: [All] [1] [2] [3] Limit CPUID Maximum [Disabled] When set to [Enabled], this item allows the legacy OS to boot even without support for CPUs with extended CPUID functions. Configuration options: [Disabled] [Enabled] ASUS Z97-PRO Series 3-33...
  • Page 112 Execute Disable Bit [Enabled] Execute Disable prevents certain classes of malicious buffer overflow attacks when combined with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Configuration options: [Disabled] [Enabled] Intel Virtualization Technology [Disabled] When set to [Enabled], a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.
  • Page 113 This item allows you to set the duration of C7 latency for C7 state. Configuration options: [Short] [Long] Package C State Support [Auto] This item allows you to set the a C-state support for the CPU package. Configuration options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s] ASUS Z97-PRO Series 3-35...

  • Page 114: Pch Configuration

    3.6.2 PCH Configuration PCI Express Configuration This item allows you to configure the PCI Express slots. PCI-E Speed [Auto] This item allows your system to automatically select the PCI Express port speed. When set to [Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E port runs at PCI-E 2.0 speed.

  • Page 115: Pch Storage Configuration

    The system automatically detects the connected SATA Express and M.2 devices and set a higher priority to M.2 over SATA Express interface. [SATA Express] The system assigns the priority bandwidth to SATA Express interface. [M.2] The system assigns the priority bandwidth to M.2 Socket 3. ASUS Z97-PRO Series 3-37...
  • Page 116 The system will automatically adjust the SRIS(Separate Reference Clock Independent Spread Spectrum Clocking Architecture) support for connected M.2 or SATA Express devices. [Disabled] Select this option for ASUS RUNWAY SATA Express bridge card. SATA Mode Selection [AHCI] This item allows you to set the SATA configuration. [Disabled] Disables the SATA function.

  • Page 117: System Agent Configuration

    This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed. DMI Gen 2 [Auto] Set this item to [Enabled] to run DMI at PCI-E 2.0 speed. Configuration options: [Enabled] [Disabled] ASUS Z97-PRO Series 3-39...

  • Page 118: Usb Configuration

    NB PCI-E Configuration This item allows you to configure the NB PCI Express settings. PCIEx16_1/2 Link Speed [Auto] This item allows you to configure the PCIEx16 speed for slots 1 and 2. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] Memory Configuration This item allows you to configure the memory configuration parameters.

  • Page 119: Platform Misc Configuration

    This item allows you to enable or disable the individual USB ports. Refer to section 1.2.2 Motherboard layout for the location of the USB ports. 3.6.6 Platform Misc Configuration The items in this menu allow you to configure the platform-related features. ASUS Z97-PRO Series 3-41...
  • Page 120 ASPM to take effect. Configuration options: [Disabled] [L0s] [L1] [L0sL1] PEG ASPM Support [Disabled] This item allows you to select the ASPM state for energy-saving conditions, or use the ASUS optimized energy saving profile. Configuration options: [Disabled] [L0s] [L1] [L0sL1] [Auto]...

  • Page 121: Onboard Devices Configuration

    Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97 SPDIF Out Type [SPDIF] [SPDIF] Sets to an SPDIF audio output. [HDMI] Sets to an HDMI audio output. ASUS Z97-PRO Series 3-43...
  • Page 122 Bluetooth Controller [Enabled] This item allows you to enable or disable the Bluetooth controller. Configuration options: [Disabled] [Enabled] Wi-Fi Controller [Enabled] This item allows you to enable to disable the Wi-Fi controller. Configuration options: [Disabled] [Enabled] ASMedia USB 3.0 Controller [Enabled] This item allows you to enable the ASMedia USB 3.0 controller of your system.

  • Page 123: Apm Configuration

    This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)] ASUS Z97-PRO Series 3-45...

  • Page 124: Network Stack Configuration

    Restore AC Power Loss [Power Off] This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss.

  • Page 125: Intel Rapid Storage Technology

    X to set up the RAID. Strip Size: [32KB] This item allows you to strip the size of your RAID setup. Configuration options: [4KB] [8KB] [16KB] [32KB] [64KB] [128KB] Capacity (MB): [0] This item allows you to set the RAID capacity. ASUS Z97-PRO Series 3-47...

  • Page 126: Monitor Menu

    Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. Qfan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan.
  • Page 127 Use the <+> or <-> keys to adjust the CPU fan’s lower temperature. The values range from 20% to 75%. CPU Fan Min. Duty Cycle(%) [20] Use the <+> or <-> keys to adjust the minimum CPU fan duty cycle. The values may differ via Qfan tuning. ASUS Z97-PRO Series 3-49...
  • Page 128 Chassis Fan 1/4 Q-Fan Control 1/4 [Enabled] These items allow you to set the chassis fans’ Q-Fan control feature into DC Mode, PWM Mode, or disable these Q-Fan controls from your motherboard. Configuration options: [Disabled] [DC Mode] [PWM Mode] The following items appear only when you set the Chassis Fan 1/4 Q-Fan Control to [PWM Mode] or [DC Mode].

  • Page 129: Boot Menu

    This item allows your system to go back to its normal boot speed. [Enabled] This item allows your system to accelerate the boot speed. The following items appear only when you set the Fast Boot to [Enabled]. ASUS Z97-PRO Series 3-51...
  • Page 130 SATA Support [All Devices] [All Devices] All devices connected to SATA ports are available during POST. This process extends the POST time. [Hard Drive Only] Only hard drives connected to SATA ports are detected during POST. [Boot Drive Only] Only boot drives connected to a SATA ports are detected during POST.
  • Page 131 Option ROM Messages [Enabled] [Enabled] The third-party ROM messages will be displayed during POST. [Disabled] Disables the ROM messages and displays only the ASUS logo during POST. Interrupt 19 Capture [Disabled] This item allows you to trap Interrupt 19 by the option ROMs.
  • Page 132 Above 4G Decoding [Disabled] This item allows you to decode the 64-bit capable devices above 4G address space. Ensure that your system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] Setup Mode [EZ Mode] [Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST. [EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST.

  • Page 133: Secure Boot

    The system verifies the PK before your system enters the OS. Delete PK This item allows you to delete the PK from your system. Once the PK is deleted, all the system’s Secure Boot keys will not be active. Configuration options: [Yes] [No] ASUS Z97-PRO Series 3-55...
  • Page 134 Load Default PK This item allows you to load the downloaded PK from a USB storage device. The PK file must be formatted as a UEFI variable structure with time-based authenticated variable. KEK Management The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database (db) and Revoked Signature database (dbx).

  • Page 135: Boot Option Priorities

    OS in Safe Mode, press <F8 > after POST (Windows 8 not supported). • To select the boot device during system startup, press <F8> when ASUS Logo appears. Boot Override These item displays the available devices. The number of device items that appear on the screen depends on the number of devices installed in the system.

  • Page 136: Tool Menu

    3.9.1 ASUS EZ Flash 2 Utility This item allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice.

  • Page 137: Asus O.c. Profile

    3.9.2 ASUS O.C. Profile This item allows you to store or load multiple BIOS settings. Load from Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press <Enter>, and then select Yes.

  • Page 138: Asus Dram Spd Information

    3.9.3 ASUS DRAM SPD Information This item allows you to view the DRAM SPD information. Chapter 3: BIOS setup 3-60...

  • Page 139: Exit Menu

    <Esc>, a confirmation window appears. Select Yes to discard changes and exit. Launch EFI Shell from USB drives This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available USB devices. ASUS Z97-PRO Series 3-61...

  • Page 140: Updating Bios

    ® ASUS EZ Flash 2: Updates the BIOS using a USB flash drive. ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a USB flash drive when the BIOS file fails or gets corrupted. ASUS BIOS Updater: Updates the BIOS in DOS environment using the motherboard support DVD and a USB flash disk drive.

  • Page 141: Asus Ez Flash 2

    3.11.2 ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk or an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com.

  • Page 142: Asus Crashfree Bios 3

    The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at http://support.asus.com and save it to a USB flash drive.

  • Page 143: Asus Bios Updater

    3.11.4 ASUS BIOS Updater ASUS BIOS Updater allows you to update the BIOS in DOS environment. The screen captures used in this section are for reference only and may not be exactly the same as actually shown on your computer screen.
  • Page 144 When the booting message appears, press <Enter> within five (5) seconds to enter FreeDOS prompt. ISOLINUX 3.20 2006-08-26 Copyright (C) 1994-2005 H. Peter Anvin A Bootable DVD/CD is detected. Press ENTER to boot from the DVD/CD. If no key is pressed within 5 seconds, the system will boot next priority device automatically.
  • Page 145 DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select Load Optimized Defaults item under the Exit BIOS menu. See section 3.10 Exit menu for details. ASUS Z97-PRO Series 3-67...
  • Page 146 Chapter 3: BIOS setup 3-68...

  • Page 147: Chapter 4: Software Support

    32-bit/64-bit Windows 8.1 operating systems (OS). ® • Motherboard settings and hardware options vary. The setup procedures presented in this chapter are for reference only. Refer to Windows operating system ® documentation for detailed information. Support DVD information The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website at www.asus.com for updates. 4.2.1 Running the support DVD Ensure that you have an Administrator account before running the support DVD in Windows 7, Windows 8, or Windows 8.1 operating systems. ® ® ® To run the support DVD: Place the Support DVD into the optical drive. In the AutoPlay dialog box, click or tap Run ASSETUP.EXE. If the AutoPlay dialog box does not appear, browse the contents of the support DVD and double-click or tap \\bin\ASSETUP.EXE to launch the ASUS motherboard support DVD main menu. ASUS Z97-PRO Series...
  • Page 148 RAID/AHCI driver disk. Click or tap to display the The Utilities menu ASUS contact shows the applications information. and other software that the motherboard supports. Click or tap an icon to display...

  • Page 149: Obtaining The Software Manuals

    4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat Reader from the Utilities tab before opening the files. ® To read about your motherboard’s utility guide: Click or tap Manual tab > ASUS Motherboard Utility Guide. From the Manual folder, open the folder of the software manual that you wish to read. Some software manuals are provided in different languages. Open the language’s folder to view the software manual. The screenshots in this section are for reference only. The actual software manuals containing in the support DVD vary by models. ASUS Z97-PRO Series...

  • Page 150: Software Information

    Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. AI Suite 3 AI Suite 3 is an all-in-one interface that integrates several ASUS utilities and allows you to launch and operate these utilities simultaneously. Installing AI Suite 3 Ensure that you have an Administrator account before installing AI Suite 3 in Windows 7, ® Windows 8, or Windows 8.1 operating systems. ® ® To install AI Suite 3 on your computer: Windows 7 OS ® Place the Support DVD into the optical drive. 2. In the AutoPlay dialog box, click or tap Run ASSETUP.exe then select the Utilities tab. 3. From the Utilities tab, click or tap AI Suite 3 then follow the succeeding onscreen instructions. Chapter 4: Software support...
  • Page 151 Go to the Start Screen then click or tap the Desktop app. On the lower left corner of the Desktop, click or tap File Explorer then select your DVD drive and tap or double-click or tap the Setup application. Launching AI Suite 3 Windows ® 7 OS From the Desktop, click or tap Start > All Programs > ASUS > AI Suite 3 > AI Suite 3. You can also launch AI Suite in Windows 7 by clicking or tapping on the Notification ® area. Windows 8 and Windows 8.1 OS ®...
  • Page 152 AI Suite 3 Main menu The AI Suite 3 main menu gives you easy-access controls and insight to what’s going on with your computer - allowing you to optimize performance settings while at the same time ensuring system stability. The AI Suite main menu includes is a quick-access menu bar that allows you to swiftly launch any of the integrated ASUS utilities. Click or tap on the top-right corner of the menu to launch the menu bar. Click or tap to launch AI Suite 3 menu bar The AI Suite 3 screenshots in this section are for reference only and can vary depending on motherboard model. AI Suite 3 main menu bar Dual Intelligent USB BIOS Processors 5 Ai Charger+ EZ Update Flashback USB 3.0 Boost...

  • Page 153: Ai Charger

    Launching Ai Charger+ To launch Ai Charger+, click or tap on the top-right corner of the AI Suite 3 main menu, then select Ai Charger+. Ai Charger+ is available only in selected motherboard models. Ai Charger+ screen Tick to enable or Click or tap to apply disable Ai Charger+ the selection • * Check the manufacturer if your USB device is a Battery Charging Specification 1.1 (BC 1.1) compliant or compatible device. • ** Actual charging speeds may vary depending on the charging rate and specifications of your USB device. • To ensure normal charging function, disconnect and reconnect your USB device every time you enable or disable Ai Charger+. • Ai Charger+ does not support USB hubs, USB extension cables, and generic USB cables. ASUS Z97-PRO Series...

  • Page 154: Usb 3.0 Boost

    Click or tap to enable UASP or Click or tap to select a USB device Turbo Mode for a faster data transfer rate Ensure to connect your USB 3.0 device to the USB 3.0 ports that support USB 3.0 Boost. Refer to section 2.3.1 Rear I/O connection of your user guide for more details. • USB 3.0 Boost automatically detects the USB 3.0 devices that support UASP. For a list of UASP-supported USB 3.0 devices, visit the ASUS website at www.asus.com. • The data transfer speed varies with USB devices. For a higher data transfer performance, use a USB 3.0 device. Chapter 4: Software support...

  • Page 155: Ez Update

    Click or tap to automatically update your motherboard driver, software and firmware Click or tap to search and Click or tap to Click or tap to select a select the BIOS file update the BIOS boot logo ASUS Z97-PRO Series...
  • Page 156 Manually update the BIOS and selecting a boot logo Click or tap to search an image file for your boot logo Click or tap to go back to Click or tap to proceed the updating EZ Update main screen BIOS and boot logo After you click or tap BIOS Update button, click or tap Flash to update the BIOS and upload the boot logo in your system.

  • Page 157: Usb Bios Flashback

    Click or tap to cancel the download schedule setting Click or tap to apply the download Click or tap to check for a new BIOS schedule setting update available for download Scheduling the BIOS download In the Download Setting field, tick Schedule (days) then select the number of days for the BIOS download schedule. Click or tap Apply to save the BIOS download schedule. Click or tap Cancel to cancel the download schedule. ASUS Z97-PRO Series 4-11...
  • Page 158 Downloading the latest BIOS Before you start downloading, ensure that you have installed the USB storage device to your computer’s USB port that supports USB BIOS Flashback. Refer to section 2.3.1 Rear I/O connection of this user guide for more details. To download the updated BIOS: From the USB BIOS Flashback screen, click or tap Check for New BIOS Update. Wait for the system to check the latest BIOS version. After the utility detects a new BIOS, click or tap from the Save to: field, select the USB flash drive, then click or tap Download. After the download is complete, click or tap OK. Chapter 4: Software support 4-12...

  • Page 159: Usb Charger

    Click or tap to discard the settings Click or tap to select the type of USB device that you wish to charge when the system is off Ensure to connect your USB device into the USB port that supports this utility. Refer to section 2.3.1 Rear I/O connection of your user guide for more details. • The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables. • The USB Charger+ may not recognize some ASUS devices due to a special design. ASUS Z97-PRO Series 4-13...

  • Page 160: Push Notice

    4.4.6 Push Notice This utility allows you get the detailed status of your system to your smart device. You can also send messages to your smart device using this utility. Before using this utility, ensure that you pair your computer with your smart device. For pairing information, refer to section Pairing your computer and smart device. Launching Push Notice on your computer To launch Push Notice, click or tap on the top-right corner of the AI Suite 3 main menu, then select Push Notice. Push Notice screen Click or tap to enable Push Notice Tick to select the smart device Click or tap to Click or tap to apply the settings discard the settings...
  • Page 161 Setting up PC Status alerts This feature allows you to send alerts of the unusual activities of the voltage, temperature, and fan settings of your computer to your smart device. Tick to select the smart device Tick to select and send alerts to your smart device Tick to send alert when the components selected are back to its normal status ASUS Z97-PRO Series 4-15...

  • Page 162: Sending Messages To Your Smart Device

    Sending messages to your smart device This feature allows you to send messages to your smart device. You can also send messages via the Push Notice messaging shortcut on the lower-right corner of your screen. To do this, click or tap << then click or tap then select Tick to select the smart device Click or tap to send your message Click or tap to key in your message Viewing your computer status on your smart device Tap on your smart device to launch Push Notice.

  • Page 163: System Information

    4.4.7 System Information This utility allows you get the detailed information of the motherboard, CPU, and memory settings. Launching the System Information To launch System Information, click or tap on the top-right corner of the AI Suite 3 main menu, then select System Information. Viewing the motherboard information Click or tap the MB tab to view the motherboard’s information. Viewing the CPU information Click or tap the CPU tab to view the processor’s information. ASUS Z97-PRO Series 4-17...

  • Page 164: Audio Configurations

    Viewing the SPD information Click or tap the SPD tab to view the memory’s information. Audio configurations The Realtek audio CODEC provides 8-channel audio capability to deliver the ultimate audio ® experience on your computer. The software provides Jack-Sensing function, S/PDIF Out support, and interrupt capability. The CODEC also includes the Realtek proprietary UAJ ® ® (Universal Audio Jack) technology for all audio ports, eliminating cable connection errors, and giving users plug and play convenience. Follow the installation wizard to install the Realtek Audio Driver from the support DVD that ® came with the motherboard package. If the Realtek audio software is correctly installed, you will find the Realtek HD Audio ® ® Manager icon on the taskbar. Double-click or tap on the icon to display the Realtek HD ® Audio Manager. Realtek HD Audio Manager ® Chapter 4: Software support 4-18...
  • Page 165 HD Audio Manager with DTS UltraPC II for ® Windows 8.1 / Windows 8 / Windows ® ® ® Configuration option tabs (vary with the audio devices connected) Advanced settings Set default device button Control settings panel Analog and digital connector status ASUS Z97-PRO Series 4-19...
  • Page 166 Selecting an audio output Realtek HD Audio Manager allows you to select the type of audio output depending on the output device that you are using. To select an audio output: Insert the audio device’s jack to the Line Out (lime) port. If the audio device’s jack is already inserted to the corresponding port, click or tap on the Realtek HD Audio Manager. On the pop-up window, tick the audio device that you plugged to the Line Out port then click or tap Next. If you select Headphone, click or tap to select the type of headphone installed then click or tap OK. If you select Front Speaker Out, click or tap to select the type of speaker installed then click or tap OK. Chapter 4: Software support 4-20...

  • Page 167: Chapter 5: Raid Support

    With the RAID 10 configuration you get all the benefits of both RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive and three new drives for this setup. ASUS Z97-PRO Series...

  • Page 168: Installing Serial Ata Hard Disks

    5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: Install the SATA hard disks into the drive bays.

  • Page 169: Intel ® Rapid Storage Technology Option Rom Utility

    The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. ASUS Z97-PRO Series...
  • Page 170 Creating a RAID set To create a RAID set: From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears: Name: Volume 0 RAID Level: aaaaaaaaaaaaaaa Disks: dssdsdsds Strip Size:aaaaaaaaaaaaaaaa Capacity:aaaaaaaaaaaaaa Sync:aaaaaaaaaa Create volume [HELP] Enter a unique volume name that has no special characters and is 16 characters or less.
  • Page 171 ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N) Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the CREATE VOLUME menu. ASUS Z97-PRO Series...
  • Page 172 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears: [DELETE VOLUME MENU] Name...

  • Page 173: Creating A Raid Driver Disk

    Select 32bit or 64bit folder depending on your operating system. Copy the files of the selected folder to the root path of your USB storage device. To set up a Windows UEFI operating system under RAID mode, ensure to load the UEFI ® driver for your optical drive. ASUS Z97-PRO Series...

  • Page 174: Installing The Raid Driver During Windows ® Os Installation

    5.2.2 Installing the RAID driver during Windows ® installation To install the RAID driver for Windows ® During the OS installation, click Load Driver to allow you to select the installation media containing the RAID driver. Insert the USB flash drive with RAID driver into the USB port or the support DVD into the optical drive, and then click Browse.

  • Page 175: Appendices

    Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. ASUS Z97-PRO Series...

  • Page 176: Canadian Department Of Communications Statement

    IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

  • Page 177: Rf Equipment Notices

    ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
  • Page 178 Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. NCC: Taiwan Wireless Statement Japan RF Equipment Statement KC (RF Equipment) Google™...

  • Page 179: Asus Contact Information

    800 Corporate Way, Fremont, CA 94539, USA Telephone +1-510-739-3777 +1-510-608-4555 Web site http://www.asus.com/us/ Technical Support Support fax +1-812-284-0883 Telephone +1-812-282-2787 Online support http://www.service.asus.com/ ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany +49-2102-959911 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-1805-010923* Support Fax +49-2102-9599-11 Online support http://www.asus.com/de/support/...
  • Page 180 Appendices...

This manual is also suitable for:

Z97-pro/usb 3.1Z97-pro series

Table of Contents