hit counter script
Sony HCD-RXD7AV Service Manual
Sony HCD-RXD7AV Service Manual

Sony HCD-RXD7AV Service Manual

Mini hi-fi component system
Hide thumbs Also See for HCD-RXD7AV:

Advertisement

Quick Links

SERVICE MANUAL
Ver 1.1 2002. 03
HCD-RXD7AV is the Amplifier, CD
player, Tape Deck and Tuner section in
MHC-RXD7AV.
Manufactured under license from Dolby Laboratories
Licensing Corporation.
"DOLBY" and the double-D symbol a are trademarks
of Dolby Laboratories Licensing Corporation.
U.S and foreign patents licensed from Dolby
Laboratories Licensing Corporation.
AUDIO POWER SPECIFICATIONS:
US model
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION :
with 6 Ω loads, both channels driven, from 70 - 20,000
Hz; rates 60 W per channel minimum RMS power,
with no more than 0.9% total harmonic distortion from
250 mW to rated output.
Amplifier section
Front Speaker :
Continuous RMS power output (reference)
70 + 70 W
(6 Ω at 1 kHz, 10% THD)
Total harmonic distortion less than 0.07%
(6 Ω at 1 kHz, 35 W)
Center Surround Speaker :
Continuous RMS power output (reference)
30 W
(6 Ω at 1 kHz, 1% THD)
Rear Surround Speaker :
Continuous RMS power output (reference)
30 + 30 W
(6 Ω at 1 kHz, 1% THD)
Sony Corporation
9-928-974-12
2002C1600-1
Home Audio Company
© 2002.03
Published by Sony Engineering Corporation
HCD-RXD7AV
Model Name Using Similar Mechanism HCD-RXD3
CD
CD Mechanism Type
Section
Base Unit Name
Optical Pick-up Name
Tape deck
Model Name Using Similar Mechanism HCD-RXD6
Section
Tape Transport Mechanism Type
SPECIFICATIONS
Inputs
MD/VIDEO IN :
voltage 450/250 mV,
(phono jacks)
inpedance 47 k
DVD INPUT
FRONT IN :
voltage 450 mV,
(phono jacks)
inpedance 47 k
CENTER IN :
voltage 450 mV,
(phono jacks)
inpedance 47 k
REAR IN :
voltage 450 mV,
(phono jacks)
inpedance 47 k
WOOFER IN :
voltage 450 mV,
(phono jacks)
inpedance 47 k
Outputs
MD/VIDEO OUT : voltage 250 mV
(phono jacks)
impedance 1 k
PHONES :
accepts headphones of
(stereo phone jack)
8
or more
FRONT SPEAKER : accepts impedance of
6 to 16
or more
CENTER SPEAKER: accepts impedance of
6 to 16
or more
SUPER WOOFER : Voltage 1 V, impedance
1 k
MINI Hi-Fi COMPONENT SYSTEM
Canadian Model
CD player section
System
Laser
Laser output
Frequency response
Wavelength
Signal-to-noise ratio
Dynamic range
CD DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
Output Level
US Model
CX3
KSM-213ECM
KSS-213ECM/C2NP
CWL-44-RR
Compact disc and digital audio
system
Semiconductor laser (λ=780nm)
Emission duration: continuous
Max. 44.6 µW*
*This output is the value
measured at a distance of 200
mm from the objective lens
surface on the Optical Pick-up
Block with 7 mm aperture.
20 Hz - 20 kHz (±0.5 dB)
780 -790 nm
More than 90 dB
More than 90 dB
600 nm
–18 dBm
Continued on next page

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-RXD7AV

  • Page 1 HCD-RXD7AV SERVICE MANUAL US Model Canadian Model Ver 1.1 2002. 03 HCD-RXD7AV is the Amplifier, CD player, Tape Deck and Tuner section in MHC-RXD7AV. Manufactured under license from Dolby Laboratories Model Name Using Similar Mechanism HCD-RXD3 Licensing Corporation. CD Mechanism Type “DOLBY”...
  • Page 2: Leakage Test

    CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
  • Page 3: Table Of Contents

    SECTION 1 SERVICING NOTES TABLE OF CONTENTS SERVICING NOTES ··················································· 3 NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT GENERAL ······································································ 4 The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the DISASSEMBLY charged electrostatic load, etc.
  • Page 4: General

    SECTION 2 GENARAL 1/u (Power) button and indicator DISC 1 to 3 button and indicators DISC SKIP button § (CD) button CD disc tray p button CD, ^ button and indicator @£ TUNER/BAND button @™ FILE SELECT button @¡ DBFB button !¡...
  • Page 5 This section is extracted from instruction manual.
  • Page 6: Disassembly

    SECTION 3 DISASSEMBLY Note : Follow the disassembly procedure in the numerical order given. 3-1. CD DOOR 2 CD door Three claws 1 Pull out the CD tray and remove the CD door with releasing claws into the direction of arrow. 3-2.
  • Page 7: Front Panel

    3-3. FRONT PANEL 8 Screws (BVTP 3 × 10) 2 Connector (CN502) 5 Screw (PTPWH 3 × 10) 7 Screws (BVTP 3 × 14) 1 Connector (CN301) (CN302) 6 Screws (BVTP 3 × 10) 4 Screw (PTPWH 3 × 10) 9 Front panel 3 Screws (BVTT 3 ×...
  • Page 8: Key Board

    3-5. CD KEY BOARD Two claws 3 Connector (CN607) 1 Screws (BVTP 3 × 12) 6 CD KEY board 2 CD PC board bracket 4 Connector (CN606) 5 Button 3-6. MECH DECK, FLD BOARD 7 FLD board 4 Screws (BVTP 3 × 10) 1 Flat type wire (CN603) 3 Mech deck 5 Connector (CN601)
  • Page 9: Front Panel (B)

    3-7. FRONT PANEL (B) 1 Screws (BVTP 3 × 10) 2 Front panel (B) Three claws Two claws Three claws 3-8. FRONT BOARD, H/P BOARD 7 Screw (BVTP 3 × 10) 5 Screws (BVTP 3 × 10) 9 H/P board 8 Holder Washer (VR601)
  • Page 10: Front Amp Board, Amp Board, Photo Socket Board, Fuse

    3-9. FRONT AMP BOARD, AMP BOARD, PHOTO SOCKET BOARD, FUSE BOARD 5 Front amp/Amp board 7 Photo socket board 6 Screw (BVTP 3 × 10) 1 Connector (CN501) 3 Screws (BVTP 3 × 10) 9 Screws (BVTP 3 × 10) 2 Screws (BVTP 3 ×...
  • Page 11: Cd Decord Board

    3-11. CD DECORD BOARD 1 Two screws (+BVTP 3 × 10) 6 Flat type wire (CN06) 5 Flat type wire (CN01) 0 CD decord board 7 Two screw (+BVTP 3 × 10) 8 Sheet 4 Connector (CN05) Claw 9 Connector (CN03) Claw Two claws 3 Belt...
  • Page 12: Base Unit

    4 Screw (+PTPWH 2.6 × 8) 3-12. BASE UNIT 2 Screw (+PTPWH 3 × 8) 3 UD-gear 5 UD-cam 7 Spring 6 Spring 8 Spring 1 Two screws (+KTP 3 × 8) 9 Base unit 3-13. CASSETTE LID (A)/(B) 1 Remove the cassette lids in the direction of arrow. Four claws Four claws...
  • Page 13: Test Mode

    SECTION 4 TEST MODE Initialization CD service mode Press the STOP button and POWER OFF button at the same time. All preset data is re-set to the initial (default) value. Press the STOP button and OPEN/CLOSE button at the same time. The message “CD S - -”...
  • Page 14: Mechanical Adjustments

    SECTION 5 SECTION 6 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS Precaution DECK SECTION 0 dB=0.775V 1. Clean the following parts with a denatured alcohol-moistened Demagnetize the record/playback head with a head swab: demagnetizer. record/playback head pinch rollers Do not use a magnetized screwdriver for the adjustments. erase head rubber belts After the adjustments, apply suitable locking compound to the...
  • Page 15 Mode: Playback Tape Speed Adjustment (Deck A) test tape Procedure: SPEAKER P-4-A100 Mode: Playback terminal (JK401) (10kHz, –10dB) (L-CH) oscilloscope test tape WS-48B frequency counter (3kHz, 0dB) – SPEAKER SPEAKER terminal (JK401) terminal (JK401) (R-CH) Waveform of oscilloscope Adjust the SFR601 so that the frequency counter reads 3,000 Hz ±...
  • Page 16 TUNER SECTION 0 dB=1µV AM Tuning Voltage Adjustment DC voltmeter Main board – Procedure: Set the reception frequency of the unit to 530 kHz. Adjust L107 for 1.2 ± 0.05 V reading on the DC voltmeter. Set the reception frequency of the unit to 1,710 kHz. Confirm that the voltage reading on the DC voltmeter is within 8.0 ±...
  • Page 17 FM Tuned Level Adjustment FM RF SSG 75 Ω coaxial Carrier frequency : 98 MHz Modulation : AUDIO 1 kHz, 75 kHz FM ANTENNA terminal deviation (100%) (JK101) Output level : 28 dB (at 75 W open) Procedure: Supply a 28 dB 98 MHz signal from the ANTENNA terminal. Tune the set to 98 MHz.
  • Page 18 CD SECTION Note: CD Block is basically constructed to operate without adjustment. Therefore, check each item in order given. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. Use an oscilloscope with more than 10MΩ impedance. Clean the object lens by an applicator with neutral detergent when the signal level is low than specified value with the following checks.
  • Page 19: Diagrams

    HCD-RXD7AV SECTION 7 DIAGRAMS 7-1. BLOCK DIAGRAMS TUNER/CD SECTION FM/AM MPX FM FRONT END IC102 FE101 JK101 Q101 CF102 CF101 10.7MHz 10.7MHz TU L FM IF AM/FM RF IF MUTE DECODER IF BUFF R CH TUB+ Q109 CF104 FM DET MUTE 10.7MHz...
  • Page 20: Main Section

    HCD-RXD7AV MAIN SECTION JK301 FRONT R CH REAR REAR R CH CENTER R CH DBFB MD/VIDEO D419 IC305 IC502 JK401 R CH IC306 RL401 LINE AMP POWER L OUT DBFB IC301 CD L Q511 Q515 REC/PB EQ AMP Q513 IC201...
  • Page 21: Circrit Boards Location

    HCD-RXD7AV 7-2. CIRCUIT BOARD LOCATION THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. PHOTO SOCKET board (In addition to this, the necessary note is printed in each block.) SW (B) board SW (D) board MOTOR (6P) (S) board...
  • Page 22: Printed Wiring Board Main Section

    HCD-RXD7AV 7-3. PRINTED WIRING BOARD MAIN SECTION • Refer to page 21 for Circuit Boards Location. • Refer to page 21 for Note on Printed Wiring Boards. • Semiconductor Location Ref. No. Location D001 D002 D103 AMP BOARD FRONT AMP BOARD...
  • Page 23: Schematic Diagram Tuner Section

    HCD-RXD7AV 7-4. SCHEMATIC DIAGRAM TUNER SECTION • Refer to page 21 for Note on Schematic Diagrams. • Refer to page 39 for IC Block Diagrams. C120A 0.022µ C127 10µ 50V 47µF...
  • Page 24: Schematic Diagram Dolby Section

    HCD-RXD7AV 7-5. SCHEMATIC DIAGRAM DOLBY SECTION • Refer to page 21 for Note on Schematic Diagrams. • Refer to page 22 for Printed Wiring Board. (1/2) (2/2) MUTE...
  • Page 25: Schematic Diagram Tape Power Section

    HCD-RXD7AV 7-6. SCHEMATIC DIAGRAM TEPE/POWER SECTION • Refer to page 21 for Note on Schematic Diagrams. • Refer to page 22 for Printed Wiring Board. • Refer to page 39 for IC Block Diagrams. TO FRONT AMP BOARD CN301 TO AMP...
  • Page 26: Printed Wiring Board Front Section

    HCD-RXD7AV 7-7. PRINTED WIRING BOARD FRONT SECTION • Refer to page 21 for Note on Printed Wiring Boards. • Refer to page 21 for Circuit Boards Location. • Semiconductor Location Ref. No. Location CD KEY BOARD D631 IC701 IC702 CN606...
  • Page 27: Schematic Diagram Front Section

    HCD-RXD7AV 7-8. SCHEMATIC DIAGRAM FRONT SECTION • Refer to page 21 for Note on Schematic Diagrams. • Refer to page 38 for IC Block Diagrams.
  • Page 28: Printed Wiring Board Fld Section

    HCD-RXD7AV 7-9. PRINTED WIRING BOARD FLD SECTION • Refer to page 21 for Note on Printed Wiring Boards. • Refer to page 21 for Circuit Boards Location. FLD BOARD SENSOR BOARD CN604 RA601 RM601 48 49 SFR601 C644 C608 RA603...
  • Page 29: Schematic Diagram Fld Section

    HCD-RXD7AV 7-10. SCHEMATIC DIAGRAM FLD SECTION • Refer to page 21 for Note on Schematic Diagrams. • Refer to page 21 for Wavefoms. • Refer to page 38 for IC Block Diagrams. • Refer to page 40 for IC Pin Function Description.
  • Page 30: Printed Wiring Board Cd Section

    HCD-RXD7AV 7-11. PRINTED WIRING BOARD CD SECTION • Refer to page 21 for Note on Printed Wiring Boards. • Refer to page 21 for Circuit Boards Location. • Semiconductor Location SW (C) BOARD Ref. No. Location SW (D) BOARD CN16...
  • Page 31: Schematic Diagram Cd Section

    HCD-RXD7AV 7-12. SCHEMATIC DIAGRAM CD SECTION • Refer to page 21 for Note on Schematic Diagrams. • Refer to page 21 for Wavefoms. • Refer to page 36 for IC Block Diagrams. NOTE The components identified by Les composants identifiés par...
  • Page 32: Printed Wiring Board Center/Rear Amp Section

    HCD-RXD7AV 7-13. PRINTED WIRING BOARD CENTER/REAR AMP SECTION • Refer to page 21 for Note on Printed Wiring Boards. • Refer to page 21 for Circuit Boards Location. TO FRONT AMP BOARD TO MAIN BOARD TO MAIN BOARD TO MAIN BOARD...
  • Page 33: Schematic Diagram Center/Rear Amp Section

    HCD-RXD7AV 7-14. SCHEMATIC DIAGRAM CENTER/REAR AMP SECTION • Refer to page 21 for Note on Schematic Diagrams. F001 5A/125V MAIN BOARD CN502 (Page 25) MAIN BOARD CN305 (Page 25) MAIN BOARD CN302 (Page 25) NOTE : • Voltages and waveforms are dc with respect to ground under no-signal conditions.
  • Page 34: Schematic Diagram Front Amp Section

    HCD-RXD7AV 7-15. SCHEMATIC DIAGRAM FRONT AMP SECTION • Refer to page 21 for Note on Schematic Diagrams.
  • Page 35: Printed Wiring Board Front Amp Section

    7-16. PRINTED WIRING BOARD FRONT AMP SECTION • Refer to page 21 for Note on Printed Wiring Boards. • Refer to page 21 for Circuit Boards Location. TO MAIN BOARD CN301 (Page 22) FRONT AMP BOARD MOTOR TH501 CN505 Q508 Q507 R577 IC502...
  • Page 36: Ic Block Diagrams

    7-17. IC BLOCK DIAGRAMS CD DECORD Board) IC701 CXA1992BR ( 33 32 31 30 PD 2 PD 1 I-V AMP I-V AMP RF SUMMING FOCUS OK COMPARATOR LASER POWER CONTROL IFB1 – IFB6 PEAK/BOTTOM MIRR HOLD COMPARATOR ↓ DEFECT PEAK/BOTTOM BIAS HOLD FOCUS BIAS...
  • Page 37 IC702 CXD2589Q (CD DECORD Board) 25 26 47 49 54 56 50 39 41 55 40 42 44 62 TES1 TEST XRST Clock Error Generator RMUT Corrector LMUT Serial In demoduretor Interface Interface ASYI XTAI Asymmetry Timing ASYO Corrector XTAO Logic BIAS Over Sampling...
  • Page 38 IC701, 702 BU2092 (FRONT Board) 16 15 14 13 12 11 12 BIT CONTROL SHIFT CIRCUIT REGISTER OUTPUT 12 BIT BUFFER STORAGE (OPEN DRAIN) REGISTER 5 6 7 8 9 IC603 74HC165 (FLD Board) PARALLEL INPUTS CLOCK SERIAL OUTPUT INHIBIT INPUT CLOCK SERIAL...
  • Page 39 IC103 LC72131 (MAIN Board) PHASE DETECTOR CHARGE PUMP POWER REFERENCE UNLOCK DIVIDER DETECTOR RESET SWALLOW COUNTER 1/16, 1/17 4BITS 12BITS PROGRAMMABLE DRIVER UNIVERSAL DATA SHIFT REGISTER LATCH INTERFACE COUNTER 2 3 4 5 6 7 8 9 IC201 TA8189N (MAIN Board) METAL TAPE A CH2/A CH2/B...
  • Page 40: Ic Pin Function Description

    7-18. IC PIN FUNCTION DESCRIPTION • FLD BOARD IC601 CXP82040-109Q (SYSTEM CONTROL) Pin No. Pin Name Description 2G,1G FLD grid output. — Not used. SCOR CXD2589Q SCOR input. COUNT CXD2589Q COUNT input. POWER DOWN IN Power data input. FOK input. REMOTE IN Remote signal input.
  • Page 41 Pin No. Pin Name Description TRAY C. SW Tray close switch signal input. VR UP Volume up signal input. VR DN Volume down signal input. CD ENCODER IN A CD JOG encode signal A input. CD ENCODER IN B CD JOG encode signal B input. 5.1CH LED 5.1CH LED ON/OFF output.
  • Page 42: Exploded Views

    SECTION 8 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • The mechanical parts with no reference number The components identified by mark ! or have some differences from the original one. in the exploded views are not supplied. dotted line with mark ! are critical for safety.
  • Page 43: Front Panel Section-1

    Ver 1.1 2002. 03 8-2. FRONT PANEL SECTION-1 front panel section-1 front panel section-2 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-223-020-01 PANEL (A), FRONT 4-223-022-01 LENS(1), CD DISC 4-220-602-01 RUBBER, FOOT 4-223-023-01 LENS(2), CD DISC 4-223-029-01 SPRING (B), EJECT 4-223-024-01 LENS(3), CD DISC 4-223-028-01 SPRING (A), EJECT...
  • Page 44: Front Panel Section-2

    8-3. FRONT PANEL SECTION-2 Supplied with VR601 Supplied with VR602 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-223-659-01 PANEL (B), FRONT 4-223-054-01 BUTTON, SKIP (+/-) 4-223-057-01 KNOB, VOLUME 4-223-047-01 KNOB, GROOVE 4-223-046-01 LENS, JOG RING 4-223-048-01 KNOB, ENTER 4-223-045-01 RING, JOG 4-223-050-01 LENS, SKIP (-)
  • Page 45: Cd Mechanism Deck Section-1

    8-4. CD MECHANISM DECK SECTION-1 M103 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-674-792-11 MOTOR BOARD 4-992-183-01 SCREW, RELAY GEAR (B) 4-221-891-01 BASE, CHANGER 4-992-174-01 GEAR, CHANGE 4-221-895-01 SHEET, BLIND 4-221-896-01 LEVER, SENSOR SW 4-992-184-01 WASHER, CHANGE GEAR 4-992-182-01 SPRING, SENSOR (SW) LEVER 4-992-176-01 SPRING, CHANGE GEAR 4-992-185-01 WASHER, CHANGE PLATE...
  • Page 46: Cd Mechanism Deck Section-2

    8-5. CD MECHANISM DECK SECTION-2 not supplied not supplied M104 Base unit block Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-769-856-11 WIRE (FLAT TYPE) (5 CORE) 4-992-193-01 LEVER, SW 4-221-897-01 CAM, UD 1-674-791-11 SW(D) BOARD 4-992-191-01 UD-GEAR 1-674-790-11 SW(C) BOARD 4-992-195-01 MAGNET...
  • Page 47: Base Unit Section (Ksm-213Ecm)

    8-6. BASE UNIT SECTION (KSM-213ECM) not supplied not supplied M101 M102 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-992-164-01 BASE, KSM MECHANICAL * 259 1-639-678-12 MOTOR (6P)(S) BOARD 4-992-165-01 DAMPER (GREEN) 1-783-740-11 WIRE (FLAT TYPE) 4-992-166-01 DAMPER (RED) ! 261 8-820-054-03 OPTICAL PICK-UP BLOCK KSM-213ECM/C2NP...
  • Page 48: Electrical Parts List

    SECTION 9 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • CAPACITORS: • SEMICONDUCTORS parts list may be different from the parts uF: µF In each case, u: µ, for example: specified in the diagrams or the components •...
  • Page 49 CD DECORD Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R513 1-260-072-11 CARBON 1/2W C728 1-137-398-11 FILM 0.068uF 100V R514 1-247-879-11 CARBON 100K 1/4W C729 1-126-962-11 ELECT 3.3uF R515 1-247-879-11 CARBON 100K 1/4W C730 1-162-215-31 CERAMIC 47PF R516 1-249-417-11 CARBON...
  • Page 50 CD DECORD Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C791 1-164-159-11 CERAMIC 0.1uF R725 1-247-899-11 CARBON 680K 1/4W C792 1-162-302-11 CERAMIC 0.0022uF 30% R726 1-249-440-11 CARBON 1/4W C793 1-162-302-11 CERAMIC 0.0022uF 30% R727 1-247-896-11 CARBON 510K 1/4W C794...
  • Page 51 CD DECORD CD KEY Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R787 1-247-839-11 CARBON 2.2K 1/4W C617 1-162-286-31 CERAMIC 220PF R788 1-247-839-11 CARBON 2.2K 1/4W C618 1-162-286-31 CERAMIC 220PF R789 1-247-847-11 CARBON 4.7K 1/4W C619 1-162-286-31 CERAMIC 220PF R790...
  • Page 52 FRONT Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks D628 8-719-911-19 DIODE 1SS133T-72 R637 1-247-855-11 CARBON 1/4W D629 8-719-911-19 DIODE 1SS133T-72 R638 1-249-417-11 CARBON 1/4W F D630 8-719-911-19 DIODE 1SS133T-72 R639 1-247-847-11 CARBON 4.7K 1/4W R640 1-247-855-11 CARBON 1/4W <...
  • Page 53 FRONT Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < DIODE > R726 1-247-839-11 CARBON 2.2K 1/4W R727 1-247-843-11 CARBON 3.3K 1/4W D631 8-719-911-19 DIODE 1SS133T-72 R728 1-247-847-11 CARBON 4.7K 1/4W R729 1-249-428-11 CARBON 8.2K 1/4W F <...
  • Page 54 FRONT FRONT AMP Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks S729 1-572-647-11 SWITCH, KEY BOARD (DVD 5.1CH) D517 8-719-991-33 DIODE 1SS133T-77 S730 1-572-647-11 SWITCH, KEY BOARD (DVD 5.1CH) D518 8-719-991-33 DIODE 1SS133T-77 S731 1-572-647-11 SWITCH, KEY BOARD (( TAPE B) D519 8-719-991-33 DIODE 1SS133T-77 S732...
  • Page 55 FRONT AMP FUSE MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R566 1-249-438-11 CARBON 1/4W C127 1-126-964-11 ELECT 10uF R567 1-247-847-11 CARBON 4.7K 1/4W C128 1-161-494-00 CERAMIC 0.022uF R568 1-247-847-11 CARBON 4.7K 1/4W C129 1-126-964-11 ELECT 10uF R569 1-247-855-11 CARBON...
  • Page 56 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C215 1-162-303-11 CERAMIC 0.0033uF 20% C328 1-126-963-11 ELECT 4.7uF C216 1-162-303-11 CERAMIC 0.0033uF 20% C330 1-126-964-11 ELECT 10uF C217 1-104-664-11 ELECT 47uF C331 1-126-961-11 ELECT 2.2uF C218 1-126-940-11 ELECT 330uF C332...
  • Page 57 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C392 1-137-162-11 FILM 0.22uF C3112 1-126-934-11 ELECT 220uF C393 1-137-162-11 FILM 0.22uF C3113 1-126-964-11 ELECT 10uF C394 1-130-495-11 MYLAR 0.1uF C3114 1-162-286-31 CERAMIC 220PF C395 1-130-491-00 MYLAR 0.047uF C3115 1-126-964-11 ELECT...
  • Page 58 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks D306 8-719-911-19 DIODE 1SS133 Q201 8-729-194-57 TRANSISTOR 2SC945TP-P D307 8-719-010-44 DIODE UZ-6.2BS Q202 8-729-194-57 TRANSISTOR 2SC945TP-P D308 8-719-010-44 DIODE UZ-6.2BS Q203 8-729-194-57 TRANSISTOR 2SC945TP-P D309 8-719-911-19 DIODE 1SS133 Q204 8-729-194-57 TRANSISTOR 2SC945TP-P D402...
  • Page 59 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R115 1-249-417-11 CARBON 1/4W F R227 1-247-881-00 CARBON 120K 1/4W R116 1-249-397-11 CARBON 1/4W F R228 1-247-881-00 CARBON 120K 1/4W R117 1-247-863-11 CARBON 1/4W R229 1-249-420-11 CARBON 1.8K 1/4W F R118...
  • Page 60 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R325 1-247-839-11 CARBON 2.2K 1/4W R402 1-247-807-11 CARBON 1/4W R327 1-247-841-11 CARBON 2.7K 1/4W R403 1-247-827-11 CARBON 1/4W R328 1-247-841-11 CARBON 2.7K 1/4W R405 1-215-863-11 METAL OXIDE R329 1-247-849-11 CARBON 5.6K...
  • Page 61 MAIN MOTOR MOTOR (6P) (S) SENSOR PHOTO SOCKET SW (A) SW (B) SW (C) SW (D) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R3128 1-247-855-11 CARBON 1/4W 1-639-678-12 MOTOR (6P) (S) BOARD R3129 1-247-855-11 CARBON 1/4W ******************** R3136...
  • Page 62 Ref. No. Part No. Description Remarks MISCELLANEOUS ************** 1-763-410-11 FAN, DC ! 13 1-783-531-51 CORD, POWER 1-769-273-11 WIRE (FLAT TYPE) (22 CORE) 1-783-579-11 WIRE (FLAT TYPE) (16 CORE) 1-772-164-11 DECK, MECH 1-769-856-11 WIRE (FLAT TYPE) (5 CORE) 1-783-740-11 WIRE (FLAT TYPE) ! 261 8-820-054-03 OPTICAL PICK-UP KSM-213ECM/C2NP M101...
  • Page 63 HCD-RXD7AV US Model Canadian Model SERVICE MANUAL SUPPLEMENT-1 File this supplement with the service manual. Subject: PART CHANGE (WIRE LENGTH OF THE B/D BLOCKS IS CHANGED) PARTS CHANGED Page FORMER Ref. No. Part No. Description Ref. No. Part No. Description...
  • Page 64 HCD-RXD7AV REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 1999.07...

Table of Contents