hit counter script
Sony SRW-5800 Installation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. VCR
  5. HDCAM-SR SRW5800
  6. Installation manual
Sony SRW-5800 Installation Manual

Sony SRW-5800 Installation Manual

Hd digital videocassette recorder
Hide thumbs Also See for SRW-5800:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
HD DIGITAL VIDEOCASSETTE RECORDER
SRW-5800
INSTALLATION MANUAL
1st Edition
Serial No. 10001 and Higher

Advertisement

Table of Contents
loading

Related Manuals for Sony SRW-5800

Summary of Contents for Sony SRW-5800

  • Page 1 HD DIGITAL VIDEOCASSETTE RECORDER SRW-5800 INSTALLATION MANUAL 1st Edition Serial No. 10001 and Higher...
  • Page 2 Right, Left: 4 cm (1.6 inches) or more rack is within the specified limit of this product. Rear: 10 cm (4 inches) or more When using a Ethernet cable: For safety,do not connect to the connector for peripheral device wiring that might have excessive voltage. SRW-5800...

  • Page 3: Table Of Contents

    Settings for Time Code ........ 1-35 (E) 1-14-2. Settings for Setup Menu ....... 1-35 (E) 1-14-3. VTR Constant Values Settings of Editor ..1-35 (E) 1-15. Removing/Reattaching Plug-in Board ....1-36 (E) 1-16. Taking Out the Cassette in Tape Slacking ..... 1-37 (E) 1 (E) SRW-5800...

  • Page 4: Manual Structure

    Related manuals Besides this “installation manual”, the following manuals are available for this unit. If these manuals are required, please contact your local Sony Sales Office/Service Center..Operation Manual (PDF) (Supplied with this unit. (CD-ROM)) This manual is necessary for application and operation (and installation) of this unit.

  • Page 5: Installation

    1-13. Reference System 1-14. Settings when Editor is Connected *Operation check If an error message appears on the time data display area, refer to the operation manual. (For more details, refer to the maintenance manual volume 1.) 1-1 (E) SRW-5800...

  • Page 6: Power Supply

    AC inlet 1-4-2. Recommeded Power Cord This unit does not come with a power cord. To get a power cord, please contact your local Sony Sales Office/Service Center. For customers in the China: 1 Power cord 250 V 10 A (1.8 m):...

  • Page 7: Installation Space

    538.5 (Mass of this unit : approx. 30 kg) 45.5 577(Maximum traveling distance) 153.5 39.5 15.9 12.7 31.5 123.8 263.5 415.9 (38.5) 42.5 457.5 Unit : mm n Remove the feet when rack mounting. Dimensions when Rack-Mounting 1-3 (E) SRW-5800...

  • Page 8: Rack Mounting

    . When installing the unit in an Outside Broadcasting van, be sure to fix the unit to the rack using the screws and . When mounting this unit into Sony LMS (Library ornamental washers supplied with the rack mount kit.
  • Page 9 When operating the unit after demounting it from the rack, will be unenabled. be sure to reattach the feet. Tightening torque: 98 x 10 N.m {10 kgf.cm} Inner rail B4 x 6 B4 x 6 Inner rail 1-5 (E) SRW-5800...
  • Page 10 (PSW4 x 16) supplied with the rack mount kit. Ball retainer Tightening torque: 120 x 10 N.m {12.2 kgf.cm} B4 x 8 PSW4 x 16 Rack angle PSW4 x 16 Rack angle PSW4 x 16 1-6 (E) SRW-5800...
  • Page 11 Rack angle Rail bracket fixing screws B4 x 8 16. To fix the two outer rails to the rack, fully tighten the eight loosely fitted hexagon socket head cap screws in step 12 using the L-shaped hexagon wrench. 1-7 (E) SRW-5800...
  • Page 12 Be careful not to catch your finger or hand in rack mount rail. Ornamental washer RK5 x 14 Stopper Ornamental RK5 x 14 washer Intermediate rail Stopper Inner rail 1-8 (E) SRW-5800...

  • Page 13: Matching Connectors And Cables

    1-7. Matching Connectors and Cables When external cables are connected to the connector of this unit, the hardware listed below (or equiva- lents) must be used. Panel indication Matching connector (cable) Sony part No. Remarks TIME CODE IN XLR 3P, MALE 1-508-084-00...

  • Page 14: Signal Inputs And Outputs

    D-SUB 9P connector (RS-422A interface), Remote control 4 VIDEO CONTROL (9P) D-SUB 9P connector for a HD digital video controller (HKDV-900) connection 4 NETWORK 1 RJ-45 modular jack Complied with 10BASE-T/100BASE-TX * : Refer to Optional “Interface manual” for details. 1-10 (E) SRW-5800...
  • Page 15 Memory stick x 1 (Lower control panel) Applicable memory stick : 8 MB to 2 GB Insert the memory stick adaptor into the PCMCIA card slot under the lower control panel. For details, refer to the maintenance manual volume 1. 1-11 (E) SRW-5800...
  • Page 16 EJECT STATUS ETHERNET ETHERNET STATUS REEL HUB REEL HUB STATUS CURRENT SETUP DATA CHANGE CURRENT SETUP DATA CHANGE STATUS ALL REC INHIBIT ALL REC INHIBIT STATUS —— —— PLAY CLOSURE SW (PLAY) STOP CLOSURE SW (STOP) (Continue) 1-12 (E) SRW-5800...
  • Page 17 TXD ; Transmitted Data (Output) DTR ; Data Terminal Ready (Output) PRIORITY SG ; Signal Ground DSR ; Data Set Ready (Input) RM TX(+) RTS ; Request to Send (Output) RM RX(_) CTS ; Clear to Send (Input) 1-13 (E) SRW-5800...

  • Page 18: Switch Settings On Connector Panel

    RM TX (+) RM RX (_) NETWORK 1: RJ-45 modular jack Standard : Complied with IEEE 802.3u (100BASE-TX) and IEEE 802.3 (10BASE-T) External view Pin No. Signal TXD (+) TXD (_) RXD (+) — — RXD (_) — — 1-14 (E) SRW-5800...

  • Page 19: Switch Settings On Circuit Boards

    . The switches S2201 and S2202 are used for the audio monitor output adjustment. Never change the setting since the adjustment is completed at factory. S2201 S2202 S2200 S1200 < Top View > APR-81 Board (Side A) 1-15 (E) SRW-5800...

  • Page 20: Cue-13 Board

    < Top View > CUE-13 Board (Side A) CUE output level settings Switches state (\ \ \ \ \ : Knob position) Ref. No. S101 +4 dBm/600 Z 0 dBm/600 Z _3 dBm/600 Z _20 dBm/600 Z (Factory setting) 1-16 (E) SRW-5800...

  • Page 21: System Setting

    [F4]SYSTEM SIGNAL MODE 422 YPbPr SYSTEM FRAME [F6]FRAME CONVERT 444 1080/59.94i [F7]ACTIVE LINE (HDCAM) OFF SYSTEM [F8]CANCEL [F9]Exec of Reset VTR Sys SIGNAL (STOP & STANDBY OFF/EJECT) FRAME ACTIVE CANCEL EXEC EXIT DIAG CNVERT LINE F9 F10 1-17 (E) SRW-5800...
  • Page 22 [F8]CANCEL [F9]Exec of Reset VTR Sys SIGNAL SIGNAL 60Hz (STOP & STANDBY OFF/EJECT) (STOP & STANDBY OFF/EJECT) FRAME ACTIVE CANCEL EXEC EXIT FRAME ACTIVE CANCEL EXEC EXIT DIAG DIAG CNVERT LINE CNVERT LINE F9 F10 F9 F10 1-18 (E) SRW-5800...
  • Page 23 SYSTEM [F8]CANCEL [F9]Exec of Reset VTR Sys SIGNAL (STOP & STANDBY OFF/EJECT) FRAME ACTIVE CANCEL EXEC EXIT DIAG CNVERT LINE (3) Check that the system is restarted, and turn OFF the POWER switch and turn ON again. 1-19 (E) SRW-5800...

  • Page 24: Compatibility Of Rec And Pb

    720/50P, 59.94P: HDCAM-SR only It is common the case playback a HDCAM-SR formatted tape with 4:2:2/1080 video date while system setting is 4:2:2/1080. RGB 4:4:4: HDCAM-SR 1080 only Tapes with different sampling method cannot be played back (4:4:4/4:2:2). 1-20 (E) SRW-5800...

  • Page 25: Meta Data Setting

    (6) Press the [F1] (META DATA) key. META DATA MENU SELECT The format selection menu appears. HDCAM SELECT FORMAT F2 : HDCAM-SR [F1] [SFT] + DIAG F4 : DOWN CONV. OUT DOWN CONV. EXIT DIAG [SFT] + [F8] DIAG F9 F10 [ALT] [F9] 1-21 (E) SRW-5800...
  • Page 26 (1080) or Meta Data 3 (1080). (3) Press the [F10] (EXIT) key several times to return to the OTHERS CHECK menu. When setting input/ output phases continuously, proceed to Section 1-11-4. (4) Turn OFF the POWER switch and turn ON again. 1-22 (E) SRW-5800...
  • Page 27 Line 3 (HDCAM-SR). (3) Press the [F10] (EXIT) key several times to return to the OTHERS CHECK menu. When setting input/ output phases continuously, proceed to Section 1-11-4. (4) Turn OFF the POWER switch and turn ON again. 1-23 (E) SRW-5800...

  • Page 28: Input/Output Phase Settings

    AUDIO PB OUTPUT ADV. : -1FRAME SD SDI AUDIO INPUT DELAY : +1FRAME DIAG TC INPUT DELAY : +1FRAME AES/EBU & F9 F10 MONITOR OUTPUT : LINE AU PB LTC OUTPUT : LINE [ALT] [F9] AUDIO AES/MO EXIT DIAG INPUT INPUT 1-24 (E) SRW-5800...
  • Page 29 : +1FRAME AES/EBU & AES/EBU & MONITOR OUTPUT : LINE AU PB MONITOR OUTPUT : LINE AU PB LTC OUTPUT : LINE LTC OUTPUT : LINE AUDIO AES/MO EXIT AUDIO AES/MO EXIT DIAG INPUT INPUT DIAG INPUT INPUT 1-25 (E) SRW-5800...

  • Page 30: Storing And Reading System Settings In

    To reset the NV-RAM to the factory setting. OTHERS CHECK NVRAM CONTROL NO OPERATION SAVE ALL DATA ALL DATA PREVIOUS RESET ALL DATA EXIT DIAG (3) Press the [F10] (EXIT) key several times to return to the HOME menu. 1-26 (E) SRW-5800...
  • Page 31 (5) Press the [F10] (EXIT) key several times to return to the HOME menu. CURRENT SYSTEM SYSTEM BANK 1 (Preset) 1 (Preset) 2 (Preset) 3 (Preset) 4 (Preset) 5 (Preset) 6 (Preset) 7 (Preset) 8 (Preset) F (Preset) DATA DETAIL EDIT DIREC- COPY EXIT DIAG TITLE TION 1-27 (E) SRW-5800...

  • Page 32: Storing/Reading System Settings In

    After the unit restarts, the title of the read bank number appears at the left item [C]. If the system settings are updated after reading, the title displayed at [C] remains unchanged. (5) Press the [F10] (EXIT) key several times to return to the HOME menu. 1-28 (E) SRW-5800...
  • Page 33 C (Preset) (Preset) 1 (Preset) (Preset) 2 (Preset) (Preset) 3 (Preset) (Preset) 4 (Preset) (Preset) 5 (Preset) (Preset) 6 (Preset) (Preset) 7 (Preset) (Preset) 8 (Preset) DATA F (Preset) DETAIL EDIT SELECT DIREC- COPY EXIT DIAG TITLE TION 1-29 (E) SRW-5800...
  • Page 34 Stick) using the [(]/[)] keys. (4) Press the [&] key to move to the left (Memory Stick side), and position the blinking cursor bar at the bank number of the save destination (system bank of Memory Stick) using the [(]/[)] keys. 1-30 (E) SRW-5800...

  • Page 35: Editing Titles Of The System Bank

    [C]. (4) Type characters. (7) Press the [F10] (EXIT) key several times to return to For typing characters, refer to the operation manual. (5) Press the [F10] (SAVE/EXIT) key. the HOME menu. The entered title is fixed. 1-31 (E) SRW-5800...

  • Page 36: Checking Saved System Bank Data In

    . META DATA SETUP menu: Section 1-11-3 The system bank data of SRW-5000/5500 is not compati- . PHASE SET menu: Section 1-11-4 ble with that of SRW-5800. (1) Display the SYSTEM BANK menu or SYSTEM CARD BANK menu. (2) Position at the item to be checked in detail using the [&]/[*]/[(]/[)] keys.

  • Page 37: Opening/Closing The Lower Control Panel

    (about 18d each time) between vertical and horizontal. Unlock button Unlock button Lower control panel Close the Lower Control Panel 1. While lifting the outer stays by the forefinger, close the lower control panel as shown in the figure. Outer stay 1-33 (E) SRW-5800...

  • Page 38: Reference System

    In the PB mode, when no reference signal is input to REF. INPUT 1 connector or when no reference video signal (REF. INPUT 1) is input. Table 1-13-1. Reference System ITEM-005 setting external auto input Operation mode PB/EDIT/REC EDIT PB/EDIT/REC Selected reference signal REF. INPUT 1 HD SDI INPUT A 1-34 (E) SRW-5800...

  • Page 39: Settings When Editor Is Connected

    VTR constant values is connected. Table 1-14-3. VTR Constant Values Settings of Editor (Standard Value/Hexadecimal) VTR CONSTANT 1 VTR CONSTANT 2 Data No. Data No. Frame rate 59.94i, 60i, 60P, 29.97PsF, 30PsF 50i, 50P, 25PsF 24PsF, 23.98PsF 1-35 (E) SRW-5800...

  • Page 40: Removing/Reattaching Plug-In Board

    Upper lid (front) assembly 6. Open the eject levers on both ends of the board in the Knob Fixing screw direction of the arrows. 7. Hold the eject levers and slowly pull the board out. Pulling out Insertion Removal Installation 1-36 (E) SRW-5800...

  • Page 41: Taking Out The Cassette In Tape Slacking

    2. Slide the knobs on upper lid (front) assembly each in the inside. (Move the knobs to the outside to fix the upper lid (front) assembly.) 3. Remove the upper lid (front) assembly in the arrow direction. Knob Upper lid (front) assembly Knob Fixing screw Removal Installation 1-37 (E) SRW-5800...
  • Page 42 8. Pull the ME wire for a few times with short steps in the arrow direction on the EJECT label to take up the tape inside the cassette. AE-31 board Board holder M gear EJECT EJECT label label ME wire Wire holder Gear box assembly 1-38 (E) SRW-5800...
  • Page 43 Write down the value of hours meter when checking, servicing, and maintaining. ITEM Date Hours meter H01: OPERATION HOURS H02: DRUM RUNNING HOURS H03: TAPE RUNNING HOURS H04: THREADING COUNTER H12: DRUM RUNNING HOURS (Resettable) H13: TAPE RUNNING HOURS (Resettable) H14: THREADING COUNTER (Resettable) A-1 (E) SRW-5800...
  • Page 44 Factory use — APR-81 Monitor output level/ S2201 Factory use — output headroom S2202 Factory use — CUE-13 CUE audio output level — S101 +4 dBm/600 Z dBm/600 Z) *1: Setting at shipping vary with the circuit board. A-2 (E) SRW-5800...
  • Page 45 S1200 HIF-46 S501 S900 S1400 S1900 S2402 S2200 HPR-22 S101 S102 S104 CP-393 SS-102 S100 S101 S300 S600 CUE-13 S100 S601 DVP-43 S200 (HKSR-5802) S800 S1000 S1301 EQ-102 S400 S403 S601 S2200 S2901 S3300 S3301 S4000 (Continued) A-3 (E) SRW-5800...
  • Page 47 The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.
  • Page 48 Printed in Japan Sony Corporation SRW-5800 (SY) J, E 2007. 10 08 3-286-476-01 ©2007...

Table of Contents