hit counter script
Sony KP-46WT520 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projection TV
  5. KP-46WT520 - Wide Screen Projection Tv
  6. Service manual

Sony KP-46WT520 Service Manual

Sony color rear video projection
Hide thumbs Also See for KP-46WT520:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
HISTORY INFORMATION FOR THE FOLLOWING MANUAL:
SERVICE MANUAL
MODEL NAME
KP-46WT520
KP-51WS520
KP-57WS520
ORIGINAL MANUAL ISSUE DATE: 7/2004
REVISION DATE
7/2004
9-965-968-01
REMOTE COMMANDER
RM-Y916
RM-Y916
RM-Y916
REVISION TYPE
SUBJECT
No revisions or updates are applicable at this time.
COLOR REAR VIDEO PROJECTION
AX-1X
DESTINATION
CHASSIS NO.
US/CND/MX
SCC-M37B-A
US/CND/MX
SCC-M37C-A
US/CND/MX
SCC-M37A-A
CHASSIS

Advertisement

Table of Contents
loading

Related Manuals for Sony KP-46WT520

Summary of Contents for Sony KP-46WT520

  • Page 1 HISTORY INFORMATION FOR THE FOLLOWING MANUAL: AX-1X SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KP-46WT520 RM-Y916 US/CND/MX SCC-M37B-A KP-51WS520 RM-Y916 US/CND/MX SCC-M37C-A KP-57WS520 RM-Y916 US/CND/MX SCC-M37A-A ORIGINAL MANUAL ISSUE DATE: 7/2004 REVISION DATE REVISION TYPE SUBJECT 7/2004 No revisions or updates are applicable at this time.
  • Page 2 Self Diagnosis Supported model AX-1X SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KP-46WT520 RM-Y916 US/CND/MX SCC-M37B-A KP-51WS520 RM-Y916 US/CND/MX SCC-M37C-A KP-57WS520 RM-Y916 US/CND/MX SCC-M37A-A KP-51WS520 RM-Y916 COLOR REAR VIDEO PROJECTION 9-965-968-01...

  • Page 3: Table Of Contents

    2-13-2. Copying All Registration Data to Other Modes ..55 SECTION 6: EXPLODED VIEWS............102 2-14. Auto Registration Offsets ............. 55 6-1. Cover (KP-46WT520 Only) ..........102 2-15. Auto Registration Error Codes ..........56 6-2. Cover (KP-51WS520/57WS520 Only) ....... 103 2-16.

  • Page 4: Specifi Cations

    75 ohm external terminal for VHF/UHF Component Video Cable (VMC-10/30 HG) Television System Control S Cable (RK-G69HG) TV Stand SU-46WT11 (For KP-46WT520 Only) NTSC, American TV Standard Channel Coverage VHF: 2-13/UHF: 14-69/CATV: 1-125 Design and specifi cations are subject to change without notice.

  • Page 5: Warnings And Cautions

    Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi...

  • Page 6: Safety Check-Out

    KP-46WT520/51WS520/57WS520 SAFETY CHECK-OUT Leakage Test After correcting the original service problem, perform the following The AC leakage from any exposed metal part to earth ground and from safety checks before releasing the set to the customer: all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes).

  • Page 7: Self-Diagnostic Function

    KP-46WT520/51WS520/57WS520 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY/TIMER LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 8 KP-46WT520/51WS520/57WS520 Display of Standby/Timer LED Flash Count TIMER Indicator STAND BY Indicator Diagnostic items Flash count +B Overcurrent 2 times Low +B Overvoltage 3 times Vert. Deflection Stopped 4 times White Balance Failure 5 times Low +B OCP/OVP 6 times Horiz.
  • Page 9 KP-46WT520/51WS520/57WS520 Self-Diagnosis Function Operation +B overcurrent (OCP) Occurs when excessive current fl ows through R6812. The increase in voltage across Q6803 causes it to turn on which sends a high signal to the micro. +B overvoltage (OVP) IC6801 detects +B OVP condition and turns on Q6802. This sends a high signal to the micro and also shuts down the AC relay.

  • Page 10: Section 1: Disassembly

    KP-46WT520/51WS520/57WS520 SECTION 1: DISASSEMBLY 1-1. REAR BOARD REMOVAL Rear board 10 Screws (KP-46WT520 Only) 13 Screws (KP-51WS520 Only) 12 Screws (KP-57WS520 Only) Dome Washer Hex Tap 4 x 20 1-2. CHASSIS ASSEMBLY REMOVAL Three screws Dome Washer (Hex Tap 4 x 20)

  • Page 11: Service Position

    KP-46WT520/51WS520/57WS520 1-3. SERVICE POSITION Free wiring from purse locks. NOTE: Observe wire dress and return to original condition. Covers Remove covers from chassis assembly with pliers when checking printed circuit boards. After checking, turn the covers over and re-secure them with the screws.

  • Page 12: Bm Board Board Removal

    KP-46WT520/51WS520/57WS520 1-5. BM BOARD BOARD REMOVAL Pry apart shield to remove BM board BM board Pull gently back on clips to release Main bracket 1-6. A BOARD, D BOARD, AND G BOARD REMOVAL Four screws (+BVTP 3x12) Seven screws (+BVTP 3x12)

  • Page 13: High-Voltage Cable Installation And Removal

    KP-46WT520/51WS520/57WS520 1-7. HIGH-VOLTAGE CABLE INSTALLATION AND REMOVAL (1) Removal (2) Installation Gutter Rubber cap HV cable Hook HV cable turn 90 1-8. PICTURE TUBE REMOVAL CAUTION: Removing the arrow-marked screws is strictly prohibited. If removed, it may cause liquid to spill.

  • Page 14: Speaker Grille, Ha1 Board, And Hb2 Board Removal (Kp-46Wt520 Only)

    KP-46WT520/51WS520/57WS520 1-9. SPEAKER GRILLE, HA1 BOARD, AND HB2 BOARD REMOVAL (KP-46WT520 ONLY) HB2 board 6 Two screws (+BVTP 3x12) Input Terminal Plate Input Terminal Bracket Four screws Dome Washer Hex Tap 4 x 20 Input Terminal Cover Two screws (+BVTP 3x12)

  • Page 15: Beznet Assembly Removal

    Four screws Dome Washer Hex Tap 4x20 Six screws Dome Washer Hex Tap 4x20 -3 per side (KP-46WT520 Only) Four screws Dome Washer Hex Tap 4x20 -2 per side (KP-51WS520/57WS520 Only) 1-11-1. SCREEN TAPE METHOD The following demonstrates the taping method when replacing the Contrast Screen or Diffusion Plates.

  • Page 16: Sr Board Removal

    KP-46WT520/51WS520/57WS520 1-12.SR BOARD REMOVAL The Screen Holder does not need to be removed in order to remove the SR boards. Sensor bracket (A) Sensor bracket (B) One screw SR board (+BVTP 4x12) Claws Four screws (+BVTP 4x12) L screen holder...

  • Page 17: Wire Dressing

    KP-46WT520/51WS520/57WS520 WIRE DRESSING 46 Cabinet 46" HB KP-46WT520/51WS520/57WS520...
  • Page 18 KP-46WT520/51WS520/57WS520 46 Cabinet 46" HA Wire 2nd Tape Position 46 Cabinet 46" HB 46" HA KP-46WT520/51WS520/57WS520...
  • Page 19 KP-46WT520/51WS520/57WS520 51 & 57 Cabinet 51" & 57" HB 51 & 57 Cabinet 51" & 57" HB 51" & 57" HA KP-46WT520/51WS520/57WS520...
  • Page 20 KP-46WT520/51WS520/57WS520 HV Wire HV wire HV Wire HV wire KP-46WT520/51WS520/57WS520...
  • Page 21 KP-46WT520/51WS520/57WS520 HV/MV Wire HV/MV wire VM Connect VM wire KP-46WT520/51WS520/57WS520...
  • Page 22 KP-46WT520/51WS520/57WS520 PWB Block Docking PWB Block Docking HA Connect SP Connect HB Connect KP-46WT520/51WS520/57WS520...
  • Page 23 KP-46WT520/51WS520/57WS520 C, FP Connect RGB signal wire 46 DY 46" DY wire Into the 1st purselock VM,RGB C/N DY-B DY-G DY-R KP-46WT520/51WS520/57WS520...
  • Page 24 KP-46WT520/51WS520/57WS520 51 & 57 DY 51" & 57"DY wire dressing Into the free purselock (8dia) Into the 2nd purselock VM,RGB C/N DY-R DY-G DY-B DY-B DY-G DY-R KP-46WT520/51WS520/57WS520...
  • Page 25 KP-46WT520/51WS520/57WS520 DY-B DY-G Excess wire KP-46WT520/51WS520/57WS520...
  • Page 26 KP-46WT520/51WS520/57WS520 Terminal Bracket Assy ANT SW 5v C/N Sub TU PP HB C/N Main TU PP ANT SW GND KP-46WT520/51WS520/57WS520...
  • Page 27 KP-46WT520/51WS520/57WS520 51" & 57" F.P Wire Dressing 51 & 57 V2 Block Assy 51" & 57" V2 BLK 2nd-Assy V2 1st-Assy Test Up(lock)/Dow KP-46WT520/51WS520/57WS520...
  • Page 28 KP-46WT520/51WS520/57WS520 AR Sensor 46" & 51"AR Sensor Wire AR Sensor 57" AR Sensor Wire Excess Wire KP-46WT520/51WS520/57WS520...
  • Page 29 KP-46WT520/51WS520/57WS520 AR Sensor Excess Wire AR Sensor KP-46WT520/51WS520/57WS520...
  • Page 30 KP-46WT520/51WS520/57WS520 AR Sensor 46 V2 Assy HB Wire Connection KP-46WT520/51WS520/57WS520...

  • Page 31: Section 2: Set-Up Adjustments

    KP-46WT520/51WS520/57WS520 SECTION 2: SET-UP ADJUSTMENTS 2-3. DEFLECTION YOKE TILT ADJUSTMENT 2-1. SCREEN VOLTAGE ADJUSTMENT (G2) (COARSE ADJUSTMENT) 1. Connect the color bar generator monoscope pattern to Video 1 input. 2. Cover the red and blue CRT lenses with lens caps to allow only green 1.

  • Page 32: Focus Lens Adjustment

    KP-46WT520/51WS520/57WS520 2-4. FOCUS LENS ADJUSTMENT 2-5. FOCUS VR ADJUSTMENT In this adjustment, use the remote commander while in service mode. 1. Set generator to crosshatch. For details on the usage of the service mode and the remote commander, 2. Cover the red and blue CRT lenses with lens caps to allow only green...

  • Page 33: Centering Magnet Adjustment

    (or use the method shown in the note below for turning off the 6. Adjust the blue spot for: CRTs individually without using lens caps) and you will adjust the red a. KP-46WT520/51WS520 to a round shape X:Y=1:1 centering magnet. b. KP-57WS520 to an oval shape X:Y=1.2:1 6.

  • Page 34: Electrical Adjustments By Remote Commander

    KP-46WT520/51WS520/57WS520 2-10.ELECTRICAL ADJUSTMENTS BY 7. If you want to go back to the most recently saved value, press “0” then “ENTER” to read the memory. REMOTE COMMANDER 8. Press “MUTING” then “ENTER” to write the new adjustment data into memory.

  • Page 35: Adjustable Service Data Lists

    A complete set of the service data, Fixed and Adjustable, can be downloaded at: http://www-ec.sdp.sel.sony.com/padics/Model_Data_List.htm Only Sony authorized Service Technician can access this site. To request a complete list of the service data in PDF format please contact Nita Wardlaw at Nita.Wardlaw@am.sony.com.
  • Page 36 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION R0GH Ratio Offset S0 G H (common) -128 R0RH Ratio Offset S0 R H (common) -128 R0BH Ratio Offset S0 B H (common) -128 R1GH Ratio Offset S1 G H (common) -128...
  • Page 37 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 141 CENT R H Cent Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 R V Cent Full / Normal -512 Zoom...
  • Page 38 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION B H Cent Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 B V Cent Full / Normal -512 Zoom -512 WideZoom...
  • Page 39 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 142 SIZE G H Size Full / Normal -120 -120 -120 -512 Zoom -120 -120 -120 -512 WideZoom -120 -120 -120 -512 1080i Full / Normal -120 -120 -120 -512 1080i Zoom...
  • Page 40 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 143 LIN R H Lin Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 R V Lin Full / Normal -512 Zoom...
  • Page 41 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 143 LIN B H Lin Full / Normal -300 -300 -300 -512 Zoom -300 -300 -300 -512 WideZoom -300 -300 -300 -512 1080i Full / Normal -300 -300 -300 -512 1080i Zoom...
  • Page 42 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 144 SKEW G H Skew Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 G V Skew Full / Normal -512 Zoom...
  • Page 43 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 145 BOW R H Bow Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 R V Bow Full / Normal -512 Zoom...
  • Page 44 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 145 BOW B H Bow Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 B V Bow Full / Normal -512 Zoom...
  • Page 45 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 146 KEY G H Key Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 G V Key Full / Normal -512 Zoom...
  • Page 46 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 147 PIN R H Pin Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 R V Pin Full / Normal -512 Zoom...
  • Page 47 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 147 PIN B H Pin Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 B V Pin Full / Normal -512 Zoom...
  • Page 48 KP-46WT520/51WS520/57WS520 SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION 148 MLIN B H Middle Lin Full / Normal -512 Zoom -512 WideZoom -512 1080i Full / Normal -512 1080i Zoom -512 1080i WideZoom -512 149 MSIZ R H Middle Size Full / Normal...

  • Page 49: Id Map Table

    KP-46WT520/51WS520/57WS520 2-11-1. ID MAP TABLE SERVICE DATA (dec) CATEGORY ITEM DESCRIPTION CONDITION ID Byte 0 (common) ID Byte 1 (common) ID Byte 2 (common) ID Byte 3 (common) ID Byte 4 (common) ID Byte 5 (common) ID Byte 6 (common)

  • Page 50: Registration Adjustment (Pje Mode Only)

    KP-46WT520/51WS520/57WS520 2-12.REGISTRATION ADJUSTMENT 2-12-1. SETUP FOR ADJUSTMENT (PJE MODE ONLY) MARKING • At the 4 sides of the screen, locate the middle. Use a tape measure to *ADJUSTING FLOW identify the middle. START Turn on the power and wait for 10 minutes.

  • Page 51: Operation Method For Projector Engine Mode

    KP-46WT520/51WS520/57WS520 2-12-3. OPERATION METHOD FOR Press Switches marker moving method. PROJECTOR ENGINE MODE Joystick (In Fine Adjustment mode) DISPLAY Pressing down on the joystick in Fine Adjustment mode switches between selecting and un-selecting a point. POWER MUTING When a point is selected, the cursor changes to that color to indicate...

  • Page 52: Pje Adjustment (Sub Defl Ection Adjustment)

    KP-46WT520/51WS520/57WS520 3. OPERATION METHOD FOR FINE ADJUSTMENT 2-13.PJE ADJUSTMENT (SUB DEFLECTION 1. Enter the service mode and select “PJE”. ADJUSTMENT) 2. Select FDIS and set the data to “01” so that the data at each position can be displayed in fi ne adjustment mode.

  • Page 53: Adjustment For Ntsc Full Mode

    KP-46WT520/51WS520/57WS520 2-13-1. ADJUSTMENT FOR NTSC FULL MODE GRN SIZE (Horizontally/Vertically) Push the joystick Push the joystick • The adjustment should be done in the numerical order given. 1) GREEN ADJUSTMENT 1. Cover the red and blue CRT lenses with lens caps to allow only green to show (or use the method shown in the note below for turning off the CRTs individually without using lens caps).
  • Page 54 KP-46WT520/51WS520/57WS520 10. Select “GRN MSIZ”, and correct the space intervals for the horizontal 14. Press the “9” button on the remote commander to enter fi ne section so the screen is equal. adjustment mode. 15. Make the fi ne adjustment so that horizontal lines and vertical lines become straight.

  • Page 55: Copying All Registration Data To Other Modes

    KP-46WT520/51WS520/57WS520 2-14.AUTO REGISTRATION OFFSETS 4) REGISTRATION DATA WRITING IMPORTANT 1. After completing each adjustment of green, blue, and red for the This adjustment must be performed after registration adjustment NTSC Full mode press the “MUTING”+ “ENTER” buttons in PJE or after readjustment for any reason! service mode on the remote commander to write the registration data to the NVM.

  • Page 56: Auto Registration Error Codes

    KP-46WT520/51WS520/57WS520 2-15.AUTO REGISTRATION ERROR CODES If an error code is displayed after the set has been correctly adjusted, check the following items: position, tilt and sizing. If any of these adjustments are off, even slightly, the auto-registration pattern will not hit the four sensors properly. This occurs when the internal generator patterns are being fl...

  • Page 57: Auto Registration Diagnostics

    KP-46WT520/51WS520/57WS520 SENSOR POSITIONS • ERROR CODE SCREEN DISPLAY In service mode, the error will be displayed in text format. Error codes in normal (customer) mode are not displayed. You must enter PJE service mode to see the error code. ERROR B...

  • Page 58: Section 3: Safety-Related Adjustments

    KP-46WT520/51WS520/57WS520 SECTION 3: SAFETY-RELATED ADJUSTMENTS D BOARD 3-2. HV HOLD DOWN CIRCUIT OPERATION CHECK 3-1. HV REGULATION CIRCUIT CHECK AND When replacing the following components marked with a Y on the ADJUSTMENT schematic diagram always check the hold-down operation. When replacing the following components marked with a Y on the...

  • Page 59: G Board

    KP-46WT520/51WS520/57WS520 G BOARD 3-3. +B MAX VOLTAGE CONFIRMATION The following adjustments should always be performed when replacing IC6503 R6590. 1. Supply 130VAC to variable autotransformer. 2. Receive dot signal pattern and set the PICTURE and BRIGHTNESS settings to their minimum.

  • Page 60: Section 4: Circuit Adjustments

    KP-46WT520/51WS520/57WS520 SECTION 4: CIRCUIT ADJUSTMENTS 4-1. P & P SUB CONTRAST ADJUSTMENT 4-3. P & P SUB-HUE AND SUB-COLOR (VIDEO) (SCON) ADJUSTMENT VIDEO (SHUE, SCOL) 1. Receive the signal. 1. Receive the signal. VIDEO 1 terminal Composite: Color-bar VIDEO 1 terminal Composite: Color-bar (white-75%, 7.5% setup)

  • Page 61: Blue Offset Adjustment

    KP-46WT520/51WS520/57WS520 4-5. BLUE OFFSET ADJUSTMENT 1. Receive the all black (1080i, component) signal with VIDEO 5 input, and set PICTURE to maximum. 2. Connect an oscilloscope between CN5 7 pin (B) on the (A Board) and ground. 3. Set in the service mode and select the category “DEF2-SLIN”.

  • Page 62: Section 5: Diagrams

    KP-46WT520/51WS520/57WS520 SECTION 5: DIAGRAMS 5-1. CIRCUIT BOARDS LOCATION HB1 (KP-51WS520/57WS520 Only) HB2 (KP-46WT520 Only) 5-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS INFORMATION All capacitors are in µF unless otherwise noted. pF : µµF 50WV or less The components identifi ed by shading and symbol are critical for safety.
  • Page 63 KP-46WT520/51WS520/57WS520 Circled numbers are waveform references. The components identifi ed by X in this basic schematic diagram have been carefully factory-selected for each set in order to satisfy regulations regarding X-ray radiation. Should replacement be necessary, replace only with the value Terminal name of semiconductors in silk screen originally used.

  • Page 64: Block Diagrams

    KP-46WT520/51WS520/57WS520 5-3. BLOCK DIAGRAMS SIGNAL FLOW BLOCK DIAGRAM Main H/V 64MSDRAM MT48LC2M32B2TG 64MSDRAM 16MSDRAM MT48LCMB2B2TG MSM56V16160F-8T TLC2933 IPWR Main Y,CV OP AMP Main Y,CV Y/Cb/Cr DRC-MF A-M-Tuner 34M LPF LMH6658 CATV 4:2:2(24bit) HREF/RPLLHD BTF-WA421 CXD2097BQ CCP2 MID-XA Main Y/Cb/Cr Main CB,C...

  • Page 65: Power Block Diagram

    KP-46WT520/51WS520/57WS520 POWER BLOCK DIAGRAM CRT 31.5KV I HOP 3.3V Reg Master micro STBY Audio Amp -22V AC Rect AC IN AC IN Rect Rect DC-DC Power Main 3.3V Supply Power PRI VCC PRI VCC Supply -5V Reg 12V Reg DC-DC 3.3V Reg...

  • Page 66: Audio Signal Path Block Diagram

    KP-46WT520/51WS520/57WS520 AUDIO SIGNAL PATH BLOCK DIAGRAM MICRO MAIN TUNER TUNER VIDEO 1 VIDEO 2 16 / 17 VIDEO 3 IC 603 IC601 CXA2188Q NJW1148 TDA7490 PWM OUPUT AUDIO AUDIO FILTER VIDEO 4 SWITCH PROCESSOR VIDEO 5 VIDEO 6 VIDEO 7...

  • Page 67: Video Path Block Diagram

    KP-46WT520/51WS520/57WS520 VIDEO PATH BLOCK DIAGRAM 86 3DWK  < <  G% $WW  &9 0DLQ 7XQHU 6XE &9<  <  ,& G% $WW  &9 3E  &;'4 :$ 3U  &   & ,&  <...

  • Page 68: Sync/Osd Path Block Diagram

    KP-46WT520/51WS520/57WS520 SYNC/OSD PATH BLOCK DIAGRAM 6\QF 3DWK 26' 3DWK 86 3DWK 6XE <  < IURP VXE FRPE 6XE & ,&  & +6   +6 ,& IURP VXE FRPE &;$$4 96  96   96 3) 0LFUR 6XE &...

  • Page 69: Schematics And Supporting Information

    KP-46WT520/51WS520/57WS520 5-4. SCHEMATICS AND SUPPORTING INFORMATION CR BOARD SCHEMATIC DIAGRAM CR BOARD WAVEFORMS TO F.BLOCK 2.4 Vp-p (H) 101 Vp-p (H) — CN9110 F GND R CRT DRIVE J9101 :FASTON TO F.BLOCK CHASSIS_GND CN9107 CN9104 R9104 :ONE TOUCH 560k 1/2W...

  • Page 70: Cb Board Schematic Diagram

    KP-46WT520/51WS520/57WS520 CB BOARD SCHEMATIC DIAGRAM CB BOARD WAVEFORMS CN9305 G2_MUTE R5575 470k 1/2W +15V R5576 R5580 Q5520 FB5206 1/10W 1/10W 2SC4634LS-YB11 1.1UH :CHIP :CHIP G2-STOP — 85.7 Vp-p (H) TO_F.BLOCK 2.0Vp-p (H) TO F.BLOCK D5520 PDZ11B-115 J9301 F GND C5550 0.001...

  • Page 71: Cg Board Schematic Diagram

    KP-46WT520/51WS520/57WS520 CG BOARD SCHEMATIC DIAGRAM CG BOARD WAVEFORMS TO F.BLOCK TO F.BLOCK CN9209 G CRT DRIVE F GND :ONE TOUCH J9201 99.5 Vp-p (H) 2.1 Vp-p (H) — R9202 SG9203 CN9201 560k :S-MICRO 1/2W C9216 TO CR:CN9101 0.0022 CN9210 NL9202...
  • Page 72 KP-46WT520/51WS520/57WS520 [R CRT DRIVE] [B CRT DRIVE] [G CRT DRIVE] COMPONENT SIDE KP-46WT520/51WS520/57WS520...
  • Page 73 KP-46WT520/51WS520/57WS520 [R CRT DRIVE] [B CRT DRIVE] [G CRT DRIVE] CONDUCTOR SIDE KP-46WT520/51WS520/57WS520...

  • Page 74: Vm Board Schematic Diagram

    KP-46WT520/51WS520/57WS520 VM BOARD SCHEMATIC DIAGRAM [VELOCITY MODULATION] COMPONENT SIDE VELOCITY MODULATION D:CN5019 CN9001 CN9003 R9001 — :S-MICRO :B TO B-P 1/4W FB9001 :FPRD MPZ2012S331 +135V TO :VM COIL +135V +135V C9004 C9006 VM COIL ASSY 0.0047 160V 500V C9002 C9001...

  • Page 75: A Board Schematic Diagram (1 Of 6)

    KP-46WT520/51WS520/57WS520 A BOARD SCHEMATIC DIAGRAM (1 OF 6) A BOARD WAVEFORMS TO P BOARD :S-MICRO CN9504 — 2.2 Vp-p (H) CN30 :TAB MAIN YPBPR (P3-10J) WA421(20) FA421(10) TO P.3 R116 R122 R125 1/10W (P1-8B) :CHIP (P1-5B) (P1-7D) 3.3k 470p 1/10W...

  • Page 76: A Board Schematic Diagram (2 Of 6)

    KP-46WT520/51WS520/57WS520 A BOARD SCHEMATIC DIAGRAM (2 OF 6) L302 SUB_OSD (P5-15F) :GLF2012 TO P.5 (P1-8B) (P1-5B) (P1-7D) SUB_OSD_RGB (P1-9B) — (P1-11E) (P6-12L) (P5-5C) FB305 (P5-3F) SUB_OSD_YS (P5-11K) BLM11A601S (P5-14C) (P5-10K) Q313 C336 :1608 (P3-6D) MSD601 SUB_CV/YC (P3-8J) R308 C304 (P3-3J)

  • Page 77: A Board Schematic Diagram (3 Of 6)

    KP-46WT520/51WS520/57WS520 A BOARD SCHEMATIC DIAGRAM (3 OF 6) A BOARD WAVEFORMS :BTOB :BTOB TO D: CN5004 TO D: CN5005 3.0 Vp-p (V) 2.3 Vp-p (V). 2.4 Vp-p (H) — TO CR:CN9103 DEFLECTION_2 (P3-3G) — D470 MMDL914T1 TO CG:CN9205 DEFLECTION_1 (P3-4E)

  • Page 78: A Board Schematic Diagram (4 Of 6)

    KP-46WT520/51WS520/57WS520 A BOARD SCHEMATIC DIAGRAM (4 OF 6) — HEATSINK OF IC601 IC601 TDA7490 AUDIO-22V AUDIO C692 0.01 F:1608 — C613 C646 560p 560p SL:1608 C634 C638 SL:1608 C648 0.001 R616 F:1608 F:1608 R646 100V R652 CH:1608 1/10W :CHIP C631...

  • Page 79: A Board Schematic Diagram (5 Of 6)

    KP-46WT520/51WS520/57WS520 A BOARD SCHEMATIC DIAGRAM (5 OF 6) CN17 CN15 CN18 :S-MICRO TO P BOARD CN26 :S-MICRO TO ANT SW CN9504 :S-MICRO TO HA1 CN1201 — (P1-8B) (P1-10H) (P1-10K) (P1-12B) (P1-6F) (P1-14C) (P3-6G) (P3-15F) (P3-5G) (P3-12K) (P4-3E) (P2-10H) R803 PF_IIC...

  • Page 80: A Board Schematic Diagram (6 Of 6)

    KP-46WT520/51WS520/57WS520 A BOARD SCHEMATIC DIAGRAM (6 OF 6) A BOARD WAVEFORMS C868 C870 R864 R872 +3.3V 2.1 Vp-p (V) 2.3 Vp-p (V) 2.1 Vp-p (V) R913 1/10W 1/10W B:1608 R917 +3.3V C859 :RN-CP :RN-CP 1/10W — 1000p :CHIP 1/10W :CHIP...
  • Page 81 KP-46WT520/51WS520/57WS520 A BOARD IC VOLTAGE LIST IC602 IC854 IC859 VOLT IC452 VOLT VOLT VOLT -15.0 VOLT -5.0 IC305 VOLT IC855 IC860 VOLT VOLT IC707 VOLT -5.0 IC603 IC856 VOLT VOLT IC604 VOLT 11.0 IC861 VOLT IC851 VOLT 11.0 -5.0 IC601...
  • Page 82 KP-46WT520/51WS520/57WS520 A BOARD TRANSISTOR VOLTAGE LIST A BOARD LOCATOR LIST COMPONENT SIDE A BOARD LOCATOR LIST CONDUCTOR SIDE DIODE TRANSISTOR DIODE TRANSISTOR E-13 E-11 F-12 IC302 H-13 Q703 C-10 Q313 Q603 E-12 C-11 F-12 IC303 E-13 Q706 Q322 Q604 E-13...
  • Page 83 KP-46WT520/51WS520/57WS520 [TERMINAL BLOCK, TUNER SUB COMB/ENCODER, POWER REGS, CRT DRIVE, AUDIO AMP, AUDIO PROCESSOR MICRO, DREGI-3, PJED3-CPU] COMPONENT SIDE KP-46WT520/51WS520/57WS520...
  • Page 84 KP-46WT520/51WS520/57WS520 [TERMINAL BLOCK, TUNER SUB COMB/ENCODER, POWER REGS, CRT DRIVE, AUDIO AMP, AUDIO PROCESSOR MICRO, DREGI-3, PJED3-CPU] CONDUCTOR SIDE KP-46WT520/51WS520/57WS520...

  • Page 85: D Board Schematic Diagram (1 Of 2)

    KP-46WT520/51WS520/57WS520 D BOARD SCHEMATIC DIAGRAM (1 OF 2) D BOARD IC VOLTAGE LIST IC5101 IC6400 IC6503 IC8002 IC8005 IC9401 R5415 C5410 0.001 VOLT VOLT VOLT VOLT VOLT VOLT 200V 134.0 R5243 1/10W :CHIP R5247 R6612 15.0 4.7k T5002 0.47 1/10W...

  • Page 86: D Board Schematic Diagram (2 Of 2)

    KP-46WT520/51WS520/57WS520 D BOARD SCHEMATIC DIAGRAM (2 OF 2) D BOARD W AVEFORMS +135V R8166 MAIN Q8003 1/10W MSD601RT1 :CHIP FB8002 FB8003 0.45UH 0.45UH HV-PROT C8037 T8001 0.056 RHT(NX-6030) D8038 IC8002 800V MM3Z15VT1 FB8001 :MPP D8024 MCZ3001DB Q8014 R8056 0.45UH MM3Z5V1ST1...
  • Page 87 KP-46WT520/51WS520/57WS520 [H/V DRIVE, H/V DY, DYNAMIC FOCUS, POWER SUPPLY, AC RECT] COMPONENT SIDE KP-46WT520/51WS520/57WS520...
  • Page 88 KP-46WT520/51WS520/57WS520 [H/V DRIVE, H/V DY, DYNAMIC FOCUS, POWER SUPPLY, AC RECT] CONDUCTOR SIDE KP-46WT520/51WS520/57WS520...
  • Page 89 KP-46WT520/51WS520/57WS520 D BOARD LOCATOR LIST CONDUCTOR SIDE DIODE DIODE TRANSISTOR D5003 D8010 Q5001 D-10 F-10 D5005 D8011 Q5004 E-10 D-10 D5101 D8012 Q5005 D-10 D5102 D8015 Q5006 C-10 E-11 D5201 D8019 Q5008 A-10 D-10 D5202 D8022 Q5009 C-11 D5203 D8023...

  • Page 90: Bm Board Schematic Diagram (1 Of 3)

    KP-46WT520/51WS520/57WS520 BM BOARD SCHEMATIC DIAGRAM (1 OF 3) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.

  • Page 91: Bm Board Schematic Diagram (2 Of 3)

    KP-46WT520/51WS520/57WS520 BM BOARD SCHEMATIC DIAGRAM (2 OF 3) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.

  • Page 92: Bm Board Schematic Diagram (3 Of 3)

    KP-46WT520/51WS520/57WS520 BM BOARD SCHEMATIC DIAGRAM (3 OF 3) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.
  • Page 93 KP-46WT520/51WS520/57WS520 [A/D, AD-DRC, MID-XA] [A/D, AD-DRC, MID-XA] COMPONENT SIDE CONDUCTOR SIDE KP-46WT520/51WS520/57WS520...

  • Page 94: G Board Schematic Diagram

    KP-46WT520/51WS520/57WS520 G BOARD SCHEMATIC DIAGRAM G BOARD IC VOLTAGE LIST IC6100 VOLT RECT + (R6012) All voltages are in V. — L6002 RECT+ RECT- CN6000 TO D C6013 JW6000 C6002 2200pF (CN6400) REC - F6000 2200pF 250V JW6021 (6013) 6.3A...
  • Page 95 KP-46WT520/51WS520/57WS520 [POWER SUPPLY, AC RECT] COMPONENT SIDE KP-46WT520/51WS520/57WS520...
  • Page 96 KP-46WT520/51WS520/57WS520 [POWER SUPPLY, AC RECT] CONDUCTOR SIDE KP-46WT520/51WS520/57WS520...

  • Page 97: Ha1 Board Schematic Diagram

    KP-46WT520/51WS520/57WS520 HA1 BOARD SCHEMATIC DIAGRAM [KEY INPUT, LED, SIRCS] COMPONENT SIDE IC1201 SBX3071-71 TO A: CN15 STBY C1201 D1201 SLR-325VCT31 R1201 CN1201 1/10W WHT-L :CHIP :S-MICRO TIMER D1203 — D1202 UDZSTE-1710B R1202 R1203 R1204 R1205 STBY 5V SLR-325VCT31 2.2k 1/10W...

  • Page 98: P Board Schematic Diagram

    KP-46WT520/51WS520/57WS520 P BOARD SCHEMATIC DIAGRAM Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. P BOARD WAVEFORMS...

  • Page 99: Sr Board Schematic Diagram

    SENSOR — 9-965-968-01<AX1>SR HB1 BOARD SCHEMATIC DIAGRAM (KP-51WS520/57WS520 ONLY) R1107 1/10W CN1101 J1101 :CHIP WHT-L :S-MICRO R1103 R1106 TO A:CN2 HB2 BOARD SCHEMATIC DIAGRAM (KP-46WT520 ONLY) 1/10W 1/10W :CHIP :CHIP — D1103 UDZSTE-1710B V2SW R1102 1/10W :CHIP R1157 1/10W CN1151...
  • Page 100 KP-46WT520/51WS520/57WS520 [FRONT TERMINAL] (KP-51WS520/57WS520 ONLY) [FRONT TERMINAL] (KP-51WS520/57WS520 ONLY) [FRONT TERMINAL] (KP-46WT520 ONLY) [FRONT TERMINAL] (KP-46WT520 ONLY) COMPONENT SIDE CONDUCTOR SIDE KP-46WT520/51WS520/57WS520...

  • Page 101: Semiconductors

    KP-46WT520/51WS520/57WS520 5-5. SEMICONDUCTORS AN77L12-TA CXA2069Q MAX4450EUK-TG069 M24C04-WMN6T(A) PST9143NL µPC393C 2SC5681-YB DTZ10B D2L20U-F FMQ-G5FMS NJM78L12A-T3 CXA2150AQ M24C32-WMN6T(A) MA111-TX ERC04-06SE PG124S15 NJM79L05A NJM2068V-TE2 UDZ-TE-17- 8.2B NJM79L05A-T3 NJM2521M(TE2) UDZ-TE-17-7.5B CATHODE NJM2903M UDZS-TE17-12B NJM2903M-TE2 UDZS-TE17-22B TOP VIEW NJM2904M UDZS-TE17-33B 1 2 3 4 5...

  • Page 102: Section 6: Exploded Views

    ASSEMBLY INCLUDES X-2021-272-1 BEZEL (46) ASSY X-2021-175-1 CABINET(46) ASSY,BOTTOM [17-18] 3-704-179-01 EMBLEM (NO.9), SONY 4-084-920-01 FOOT 6-1. COVER (KP-46WT520 ONLY) 4-090-943-11 SCREEN (46W), CONTRAST 4-084-932-21 CATCH (S) 2-059-421-11 PLATE (46WL), DIFFUSION 2-023-378-02 BOARD(46), FRONT 7-685-661-14 SCREW +BVTP 4X12 TYPE2 IT-3...

  • Page 103: Cover (Kp-51Ws520/57Ws520 Only)

    6-2. COVER (KP-51WS520/57WS520 ONLY) X-2021-281-1 BEZNET (57) ASSY 2-022-468-01 BOARD (57), REAR (KP-57WS520 ONLY) (KP-57WS520 ONLY) 7-685-661-14 SCREW +BVTP 4X12 TYPE2 IT-3 3-704-179-01 EMBLEM (NO.9), SONY X-2021-270-1 CABINET(51)ASSY, BOTTOM [17] (KP-51WS520 ONLY) (KP-51WS520 ONLY) 4-381-079-01 EMBLEM (NO.10), SONY X-2021-166-1 CABINET (57), ASSY...

  • Page 104: Chassis

    PART NO. DESCRIPTION ASSEMBLY INCLUDES REF.NO. PART NO. DESCRIPTION 4-081-063-11 SCREW,DOME WASHER HEX TAP 4X20 A-1063-104-A BM BOARD, COMPLETE (KP-46WT520 ONLY) A-1068-754-A P BOARD, COMPLETE 6-3. CHASSIS 4-081-063-01 SCREW,DOME WASHER HEX TAP 4X20 4-069-675-01 CAP, TERMINAL BOARD (KP-51WS520/57WS520 ONLY) 2-023-279-02...

  • Page 105: Picture Tube

    DESCRIPTION REF.NO. PART NO. DESCRIPTION A-1054-147-A CB BOARD, MOUNTED 8-735-182-05 CRT 07MRC21(G) 16LWP12HAA A-1054-148-A CG BOARD, MOUNTED (KP-46WT520/51WS520 ONLY) 6-4. PICTURE TUBE A-1054-146-A CR BOARD, MOUNTED A-1604-483-A COUPLER (G) ASSY, CRT A-1405-662-A VM BOARD, MOUNTED (KP-57WS520 ONLY) 7-685-648-79 SCREW +BVTP 3X12 TYPE2 IT-3...

  • Page 106: Section 7: Electrical Parts List

    US Models: For US models, the Custom Rating Menu includes the following options. (For Canadian models, see page 71.) Selecting Custom Rating Options Option Description Movie Rating All children and General Audience. Parental Guidance suggested. PG-13 The Content-Based Ratings Parental Guidance for children under 13. are linked to the level of the Restricted viewing, parental guidance is Age-Based Rating.
  • Page 107 Canadian Models: For Canadian models, the Custom Rating Menu includes the following options. (For US models, see page 70 Selecting Custom Rating Options Option Description English Rating All children. Children 8 years and older. General programming. Parental Guidance. Viewers 14 and older. Adult programming.

  • Page 108: Using The Setup Menu

    Using the Setup Menu To access the Setup Menu, follow these steps: Caption Vision: Off Display Menu Highlight Select Info Banner Video Label MENU Language: English Clock/Timers Flash Focus Convergence To change settings, press V v B Press to confirm the selection. To exit the Menu, press MENU Selecting...
  • Page 109 Option Description Video Label Allows you to identify A/V equipment you connected to the TV, such as a VCR, DVD, etc. For example, if you have a DVD player connected to the VIDEO 5 jack, you can select the label for the VIDEO 5 input.
  • Page 110 Option Description Current Time Clock/Timers (continued) Press to select Current Time. Press to set the current time (day, hour, and minute). Press (or press ) to confirm each setting and move to the next setting. Press to go back to the previous setting. Press MENU to exit the Menu.

This manual is also suitable for:

Kp-51ws520Kp-57ws520

Table of Contents