Storage temperature: -20˚C to + 60˚C (-4 ˚F to recording. + 140 ˚F) ** The unique pixel array of Sony's ClearVid Dimensions (approx.): 48 × 29 × 81 mm (1 15/16 CMOS Sensor and image processing system × 1 3/16 × 3 1/4 in.)(w × h × d)
Page 3
× 1 3/16 × 3 1/4 in.)(w × h × d) recording. excluding the projecting parts ** The unique pixel array of Sony's ClearVid CMOS Sensor and image processing system Mass (approx.): 170 g (6.0 oz) excluding the (BIONZ) allows still image resolution power cord (mains lead) equivalent to the sizes described.
Page 4
ENGLISH JAPANESE ENGLISH JAPANESE HDR-CX11E/CX12/CX12E_L2 — 4 —...
Page 5
Model information table Model HDR-CX11E HDR-CX12 HDR-CX12E US, CND, E, KR, NE, CH, AUS, HK, Destination AEP, UK, NE JE, J E, JE Color system NTSC Data copy Supplied accessory 4 GB : EXCEPT J 4 GB 4 GB "Memory Stick PRO Duo"...
Page 6
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
Page 7
ENGLISH JAPANESE ENGLISH JAPANESE • • • Lead Free • • • • • HDR-CX11E/CX12/CX12E_L2 — 7 —...
C : Corrected by customer Refer to “1-2-3. Self-diagnosis Code Table”. Indicates the appropriate H : Corrected by dealer step to be taken. E : Corrected by service E.g. engineer 31 ..Reload the tape. 32 ..Turn on power again. HDR-CX11E/CX12/CX12E_L2...
Page 9
Note 1 : Refer to Service Manual, ADJ (“1-3. DESTINATION DATA WRITE”). Note 2 : When the lens block was replaced, execute the necessary adjustment items referring to Service Manual, ADJ. After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the handheld operation. HDR-CX11E/CX12/CX12E_L2...
(IC1301 of VC-535 board) periphery. Note: When the lens block was replaced, execute a necessary adjustment items referring to Service Manual, ADJ. After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the handheld operation. HDR-CX11E/CX12/CX12E_L2...
Page 11
F948, data: 00, and then retry. Note 2: When the lens block was replaced, execute the necessary adjustment items referring to Service Manual, ADJ. After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the handheld operation. HDR-CX11E/CX12/CX12E_L2...
Page 12
LD-241 board with new one. Note: When the lens block was replaced, execute the necessary adjustment items referring to Service Manual, ADJ. After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the handheld operation. HDR-CX11E/CX12/CX12E_L2...
Page 13
Therefore, in case of replacing VC-535 board, the data for the PITCH sensor (SE9001) on LD-241 board is lost. On replacing VC-535 board, cope with one procedure as following mentioned. • Replace VC-535 and LD-241 boards at the same time. • Replace VC-535 board and the PITCH sensor (SE9001) on LD-241 board at the same time. HDR-CX11E/CX12/CX12E_L2...
Page 14
ENGLISH JAPANESE ENGLISH JAPANESE 1. SERVICE NOTE 1-1. 8.4Vdc AC-L200/L200B 1-2. 1-2-2. 1-2-1. L C D 3.2Hz C : 3 1 : 1 1 3.2Hz 1-2-3. HDR-CX11E/CX12/CX12E_L2...
Page 15
ENGLISH JAPANESE ENGLISH JAPANESE w; wa HDR-CX11E/CX12/CX12E_L2...
Page 16
ENGLISH JAPANESE ENGLISH JAPANESE LD-241 BOARD (SIDE B) VC-535 BOARD (SIDE A) R5526 IC5501 IC1301 R5549 R5534 HDR-CX11E/CX12/CX12E_L2...
Page 17
ENGLISH JAPANESE ENGLISH JAPANESE 7430 F946 F948 F948 F946 F948 F948 7430 HDR-CX11E/CX12/CX12E_L2 1-10...
Page 18
ENGLISH JAPANESE ENGLISH JAPANESE 7430 F947 F949 F949 F947 F949 F949 7430 HDR-CX11E/CX12/CX12E_L2 1-11...
Page 19
ENGLISH JAPANESE ENGLISH JAPANESE 1-4. VC-535 DESTINATION DATA WRITE ID USB Serial No. USB SERIAL No. INPUT PITCH/YAW LD-241 PITCH (SE9001) PITCH VC-535 VC-535 LD-241 PITCH (SE9001) VC-535 • VC-535 LD-241 • VC-535 LD-241 PITCH (SE9001) HDR-CX11E/CX12/CX12E_L2 1-12...
Page 20
(ENGLISH) HDR-CX11E (AEP, UK Models) 1-5. PRECAUTION ON REPLACING THE HOLDER (MS) (HDR-CX11E) The model display adopts the laser printing method.Therefore, the holder (MS) for replacement differs depending on the destination. As similar displays are provided, choose the suitable one for order.
Page 21
Description A-1556-660-A HOLDER (CX12-E23),(MS) HDR-CX12 (Korea Model) Affix the label Serial No. (MS) (MS) Manufacturing year Part No. Description 3: Korean Japanese (MS) A-1556-661-A HOLDER (CX12-KR2),(MS) HDR-CX12 (Tourist Model) (MS) Serial No. Part No. Description A-1556-662-A HOLDER (CX12-JE3),(MS) HDR-CX11E/CX12/CX12E_L2 1-14...
Page 22
1-7. (MS) (HDR-CX12E) ( M S ) Serial No. Part No. Description A-1556-663-A HOLDER (CX12E-E34),(MS) (MS) HDR-CX12E (Chinese Model) Serial No. Part No. Description A-1556-664-A HOLDER (CX12E-CN2),(MS) HDR-CX12E (Tourist Model) Serial No. Part No. Description A-1556-666-A HOLDER (CX12E-JE3),(MS) HDR-CX11E/CX12/CX12E_L2 1-15E...
Elect Cap 70uF 330V (C5206) ST-201 Board NOTE FOR DISCONNECTING THE HARNESS (COAXIAL CABLE) When disconnecting the harness (COAXIAL CABLE), do not pull the harness part but pull off the connector body with tweezers etc. Harness (coaxial cable) Tweezers etc. HDR-CX11E/CX12/CX12E_L2...
EXPLODED VIEW HARDWARE LIST Follow the disassembly in the numerical order given. 1 LCD Panel Section (1-1 to 1-9) Cabinet R Section (#2/#10) (See Page 2-5) (#2/#10) HELP02 HELP02 1-6 (Claw) 1-7 (Claw) (Claw) (#2/#10) 1 LCD Panel Section HDR-CX11E/CX12/CX12E_L2...
Page 27
2 CK-203 Board HELP03 Note: On installation of the CK-203 board, adjust the position of the "NIGHTSHOT" switch and the "NIGHTSHOT" nob. HELP04 3 Loud - 2 0 3-1 (#3) Speaker 2-6 (#3) (SP901) HELP05 1-3 (#2) 1 Hinge Block HDR-CX11E/CX12/CX12E_L2...
Page 30
2 Insert the flexible board lens barrier unit to the groove as shown in figure. Be sure not to set the flexible board out of upper side from groove portion (red line in the figure). Groove Flexible Board HDR-CX11E/CX12/CX12E_L2 HELP...
Page 31
(Note: It is the same order on removal and on assembling.) Disassembly Re-assembly 1Claw A 1Claw A Inner Mold Inner Mold 2Claw B 2Claw B HELP03 CK-203 Board Adhesive Sheet (9 x 14mm) Loud Speaker (SP901) Harness arrangement HELP04 Sheild Sheet (BtoB) FP-736 Flexible Board HDR-CX11E/CX12/CX12E_L2 HELP...
Page 32
2 Pass FP-737 flexible board through the flexible clamp 3 Install the flexible clamp in the hinge assy as shown in figure. as shown in figure. Stopper of FP-737 flexible board Flexible clamp Concave side of hinge Flexible clamp HDR-CX11E/CX12/CX12E_L2 HELP...
Page 33
6 Install the FP-934 flexible board in the hinge cover (rear) as shown in figure. FP-934 flexible board Hinge cover (rear) Switch 7 Install the hinge cover (rear) in the hinge assy as shown in figure. Hinge cover (rear) Switch FP-737 flexible board Plate of hinge HDR-CX11E/CX12/CX12E_L2 HELP...
Page 34
HELP06 Claws Attach the adhesive part of the FP-939 Flexible Board Flexible Board of the Control switch block (PS27700) Flexible Board of the Microphone Unit Printed Valley fold Printed Flexible Board of the Microphone Unit Mountain fold Printed HDR-CX11E/CX12/CX12E_L2 HELP...
Page 35
2 Remove the belt bracket (rear) as shown. Grip Belt HELP08 CMOS Block Assy (CM-094 Board) CM Radiation Sheet (900) Be sure not to load to CM-094 Board and not to bend the sheet. Lens Radiation Frame (L) HDR-CX11E/CX12/CX12E_L2 HELP...
CONTROL SWITCH BLOCK (CK-VC CONNECTION) (PS27700) FP-737 FLEXIBLE BOARD CONTROL SWITCH BLOCK (PD-CK CONNECTION) (RS27700) FP-933 FLEXIBLE BOARD CONTROL SWITCH BLOCK (REMOTE SENSOR) (SB27700) FP-934 FLEXIBLE BOARD FLASH UNIT (PANEL REVERSE) FP-935 FLEXIBLE BOARD (A/V CONNECTOR) COMMON NOTE FOR SCHEMATIC DIAGRAMS HDR-CX11E/CX12/CX12E_L2...
Page 47
In addition, ensure that the receiver is not covered with Replace only with part number specified. dusts nor exposed to strong light. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifie. HDR-CX11E/CX12/CX12E_L2...
Page 48
ENGLISH JAPANESE 4-2. SCHEMATIC DIAGRAMS ENGLISH JAPANESE 4-2. SCHEMATIC DIAGRAMS (JAPANESE) Pattern box PTB-450 For PTB-450: J-6020-250-A J-6082-200-A For PTB-1450: Small pattern box J-6082-559-A PTB-1450 J-6082-557-A L = 1 m (PTB-450) L = 40 cm (PTB-1450) Ω HDR-CX11E/CX12/CX12E_L2...
Page 49
Schematic diagrams of the CM-094, VC-535 and LD-241 boards are not shown. Pages 4-4 to 4-26 are not shown. HDR-CX11E/CX12/CX12E_L2...
Page 50
L C D D R I V E X X M A R K : N O M O U N T N O M A R K : R E C / P B M O D E HDR-CX11E/CX12/CX12E_L2 PD-371 4-27...
Page 51
N o t e : S P 9 0 1 i s n o t i n c l u d e d i n C K - 2 0 3 c o m p l e t e b o a r d . HDR-CX11E/CX12/CX12E_L2...
Page 52
F L A S H D R I V E X X M A R K : N O M O U N T N O M A R K : R E C / P B M O D E HDR-CX11E/CX12/CX12E_L2 ST-201 4-29...
Page 53
V D 7 3 0 5 I N T E R F A C E C O N N E C T O R X X M A R K : N O M O U N T HDR-CX11E/CX12/CX12E_L2 CR-092 4-30...
Page 54
M I C , H O T S H O E E X T E N S I O N B O A R D X X M A R K : N O M O U N T N O M A R K : R E C / P B M O D E HDR-CX11E/CX12/CX12E_L2 PH-003 4-31...
Page 55
FP-712 FLEXIBLE BOARD C K - V C C O N N E C T I O N BARRIER UNIT CONNECTION FP-712 FLEXIBLE BOARD is replaced as block, so that PRINTED WIRING BOARD is omitted. HDR-CX11E/CX12/CX12E_L2 MS-402, FP-712, FP-736 4-32...
Page 56
P A N E L R E V E R S E ( P R I N T E D W I R I N G B O A R D i s o m i t t e d . ) HDR-CX11E/CX12/CX12E_L2 FP-735, FP-737, FP-933, FP-934...
Page 57
( P R I N T E D W I R I N G B O A R D i s o m i t t e d . ) F P - 9 3 7 F L E X I B L E B O A R D H D M I C O N N E C T O R HDR-CX11E/CX12/CX12E_L2 FP-935, FP-937, FP-938 4-34...
Page 58
S T - V C C O N N E C T I O N ( P R I N T E D W I R I N G B O A R D i s o m i t t e d . ) HDR-CX11E/CX12/CX12E_L2 FP-939, FP-940, FP-941...
Page 59
( P R I N T E D W I R I N G B O A R D i s o m i t t e d . ) F P - 9 4 9 F L E X I B L E B O A R D D C I N HDR-CX11E/CX12/CX12E_L2 FP-942, FP-948, FP-949 4-36...
Page 60
C O N T R O L S W I T C H B L O C K ( S B 2 7 7 0 0 ) i s r e p l a c e d a s b l o c k , s o t h a t P R I N T E D W I R I N G B O A R D i s o m i t t e d . HDR-CX11E/CX12/CX12E_L2 PS27700, RS27700, SB27700...
12PIN N.C. R001 13PIN N.C. 14PIN 1/8W XE_A LND014 15PIN XE_A LND015 16PIN XE_A XE_A LND016 17PIN XE_A LND017 18PIN LND051 FLASH UNIT FLASH UNIT is replaced as block, so that PRINTED WIRING BOARD is omitted. HDR-CX11E/CX12/CX12E_L2 FLASH UNIT 4-38...
Page 63
: pattern of the rear side (The other layers’ patterns are not indicated) • Through hole is omitted. • There are a few cases that the part printed on diagram isn’t mounted in this model. • C: panel designation (JAPANESE) HDR-CX11E/CX12/CX12E_L2 4-39...
Page 64
Printed wiring boards of the CM-094, VC-535 and LD-241 boards are not shown. Pages 4-40 to 4-43 are not shown. HDR-CX11E/CX12/CX12E_L2...
Page 70
FP-948 FLEXIBLE BOARD CN1001 HDMI OUT 1-876-201- FP-949 FLEXIBLE BOARD 1-876-212- BH001 (BATTERY TERMINAL BOARD) J001 DC IN Note: BH001 is not included in FP-948 flexible board. 1-876-213- Note: J001 is not included in FP-949 flexible board. HDR-CX11E/CX12/CX12E_L2 FP-937, FP-948, FP-949 4-49E...
Page 72
• • • • • • Abbreviation AUS : Australian model CH : Chinese model CND : Canadian model HK : Hong Kong model : Japanese model : Tourist model KR : Korea model NE : North European model HDR-CX11E/CX12/CX12E_L2...
1-771-138-21 SWITCH, KEY BOARD (EASY) S6005 1-771-138-21 SWITCH, KEY BOARD (PLAY) S6006 1-771-138-21 SWITCH, KEY BOARD (BACK LIGHT) S6007 1-786-148-11 SWITCH, PUSH (1 KEY) (PANEL OPEN/CLOSE) ************************************************************ Electrical parts list of the CM-094 is not shown. Pages 5-13 is not shown. HDR-CX11E/CX12/CX12E_L2 5-12...
Page 84
1-876-205-11 FP-941 FLEXIBLE BOARD 1-873-336-11 FP-737 FLEXIBLE BOARD ******************** (There isn’t mounted electrical parts in FP-941 flexible board.) ******************** (There isn’t mounted electrical parts in FP-737 flexible board.) ************************************************************ ************************************************************ • Refer to page 5-1 for mark 0. HDR-CX11E/CX12/CX12E_L2 5-14...
Page 85
(J001 is not included in FP-949 flexible board.) < JACK > 0 J001 1-815-792-11 CONNECTOR, DC-IN (7.2V) (DC IN) ************************************************************ Electrical parts list of the LD-241 is not shown. Pages 5-16 to 5-17 are not shown. • Refer to page 5-1 for mark 0. HDR-CX11E/CX12/CX12E_L2 5-15...
Page 87
When mounting these parts, mount new battery holder first < TRANSISTOR > and attach new lithium storage battery next. 0*Q5201 6-551-686-01 TRANSISTOR TIG030TS-S-TL-E < RESISTOR > R5201 1-208-947-11 METAL CHIP 330K 0.5% 1/16W • Refer to page 5-1 for mark 0. HDR-CX11E/CX12/CX12E_L2 5-19...
Page 89
“É G É ì É W É á É C É n É ì É f É B Å [ É J É Ä ” 1-823-156-61 1-829-868-31 3-282-264-01 ‰pŒê / ŠØ • ‘Œê / “ú – {Œê ƒ•ƒCƒ„ƒŒƒXƒŠƒ‚ƒRƒ“ (RMT-835) 1-479-275-41 ƒnƒ“ƒfƒBƒJƒ€ƒnƒ“ƒhƒuƒbƒN (PDF) CD-ROM•u Handycam Application Software•v -•u PMB•v (ƒ\ƒtƒgƒEƒFƒA -•u PMB ƒKƒCƒh•v -•uƒnƒ“ƒfƒBƒJƒ€ƒnƒ“ƒhƒuƒbƒN•v 3-876-054-01(“ú – {Œê ) 3-879-527-01 • 0 HDR-CX11E/CX12/CX12E_L2 5-28E...
Page 90
HARDWARE LIST (1/8) #1: M1.7 X 2.5 #2: M1.7 X 4.0 #3: M1.7 X 2.5 #4: M1.4 X 2.5 (Tapping) (Black) (Black) (Red) (Dark Silver) 2-635-562-11 2-635-562-31 2-660-401-01 3-348-998-81 #5: M1.7 X 3.5 (Tapping) #6: M1.4 X 1.7 #7: M1.7 X 1.6 #8: M1.7 X 3.5 (Tapping) (Black) (Silver)
Page 91
HARDWARE LIST (2/8) #21: M1.4 X 3.0 #22: M1.7 X 5.0 (Tapping) #23: M1.7 X 4.0 (Tapping) #24: B1.7 X 5.5 (Tapping) (Black) (Silver) (Black) (Black) 2-662-396-21 3-083-261-01 3-080-204-11 4-679-805-11 #25: M1.7 X 3.0 #26: M1.4 X 2.0 #27: M1.4 X 2.0 #28: M1.4 X 4.0 (Tapping) (Black) (Silver)
Page 92
HARDWARE LIST (3/8) #41: M3.0 X 8.0 (Tapping) #42: M2.0 X 4.0 (Tapping) #43: M1.7 X 4.0 #44: M1.7 X 3.0 (Tapping) (Silver) (Silver) (Red) (Silver) 3-065-748-01 7-628-253-00 2-660-401-31 3-078-890-61 #45: M1.4 X 2.5 #46: M1.7 X 3.0 #47: M1.4 X 3.0 (Tapping) #48: M1.7 X 2.5 (Silver) (Red)
Page 93
HARDWARE LIST (4/8) #64: M1.7 X 5.0 (Tapping) #61: M3.0 X 10.0 #62: M2.0 X 3.0 #63: M5.0 X 12.5 (Silver) (Black) (Silver) (Black) 2-666-551-21 7-682-549-09 3-080-202-21 3-060-811-21 12.5 10.0 #65: M1.4 X 3.5 #66: M1.4 X 1.4 #67: M1.4 X 2.0 #68: M1.7 X 4.0 (Silver) (Silver)
Page 94
HARDWARE LIST (5/8) #81: M1.7 X 2.5 #82: M1.4 X 1.4 #83: M1.7 X 7.0 (Tapping) #84: M2.0 X 3.0 (Silver) (Silver) (Black) (Silver) 2-515-756-01 3-272-251-01 3-080-204-41 3-072-453-11 #85: M1.7 X 2.5 #86: M1.7 X 4.0 (Tapping) #87: M1.6 X 5.3 #88: M1.6 X 5.9 (Tapping) (Black) (Silver)
Page 95
HARDWARE LIST (6/8) #101: M2.0 X 5.0 #102: M2.6 X 8.0 #103: M2.6 X 10.0 #104: M3.0 X 8.0 (Silver) (Black) (Silver) (Black) 7-621-555-39 7-621-284-30 7-685-794-09 7-682-548-09 10.0 #105: M2.0 X 4.0 #106: M2.0 X 6.0 #107: M2.0 X 5.0 #108: M1.7 X 3.0 (Tapping) (Red) (Black)
Page 96
HARDWARE LIST (7/8) #121: M2.0 X 4.0 (Tapping) #122: M3.0 X 6.0 #123: M4.0 X 8.0 #124: M1.7 X 2.0 (Silver) (Black) (Black) (Silver) 7-682-547-09 3-080-205-11 7-682-561-09 2-599-475-01 #125: M1.4 X 3.0 #126: M2.9 X 3.5 #127: M3.0 X 25.0 #128: M4.0 X 12.0 (Black)
Page 97
HARDWARE LIST (8/8) #141: M2.6 X 5.0 (Tapping) (Silver) 7-685-791-01...
Page 99
0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié. HDR-CX11E/CX12/CX12E_L2 — 2 —...
Page 100
Lens frame (R). and press it securely. Lens frame (R) Non woven (T0.25) (7mm x 16mm) VC-535 board CN1011 Fit Non woven (T0.25) (7mm x 16mm) (FP-938 flexible to the surface of VC-535 board. board connection) HDR-CX11E/CX12/CX12E_L2 — 3 —...
Reverse 985260132.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2008.06 Official Release — — 2008.11 Supplement-1 • Addition and Change of Repair Parts List (DI08-291) • Addition of HELP • Revision of Accessories S.M. Revised: Page 5-27 HDR-CX11E/CX12/CX12E_L2...