1-9. OPTICAL UNIT BLOCK REMOVAL
Use caution not to damage the lens when removing the Optical Unit Block Assembly
1
Remove 2 screws, +BVTP2 4x16
Caution:
When replacing the Optics Unit Block Assembly be sure to remove any dust particles.
If necessary,
gently cut the foam
above the connector cable
to detach from the
Optical Unti Block
Assembly.
NOTE: The connector is
NOT included with the
Optical Block Assembly.
KDF-37H1000
Optical Unit
Block Assembly
1
Rear Cover
KDF-37H1000
17