Page 1
Thank you for choosing Huwei E589 4G Mobile WiFi This guide briefly describes the functions of your Huawei E589 4G Mobile WiFi. For more details, see help on the web management page. See” Accessing the Web Management Page” on page 13.
Getting to Know Huawei E589 4G Mobile WiFi Connection Scenario Any WiFi device can be connected to the Internet through your Huawei E589 4G Mobile WiFi. You can connect up to 10 different devices. The actual connection procedure depends on the operating system of the WiFi device. The connection scenario illustrated...
Getting to know your Huawei E589 4G Mobile WiFi Item Screen WPS button Press it twice consecutively to display the SSID and wireless network key. Press and hold it until a WPS activation animation is displayed to enable the WPS function.
Page 4
Screen Item Signal strength Network Wi-Fi enabled Number of devices connected Internet connection status New messages Number of new messages 00:00 Battery level International roaming state Traffic data Connection duration A: Auto mode M: Manual mode ...
Page 5
Note: WiFi: Wireless Fidelity WPS: WiFi Protected Setup Traffic statistics are for your reference only. To obtain the actual traffic data, contact your service provider. SSID and Wireless Network Key To connect a WiFi device to your Mobile WiFi, an SSID and a wireless network key are required.
Before You Start Inserting the SIM Card Caution: Do not use any SIM card that is not standard or is incompatible with the Mobile WiFi. Otherwise, the Mobile WiFi may be damaged. Insert the SIM card in the card slot. Be sure that the SIM card is facing in the right direction, as shown in the following picture , and then slide the SIM card into the slot.
Page 7
Inserting the micro SD Card Insert the micro SD card into the Mobile WiFi, as shown in the picture below. Note: The microSD card is an optional accessory. You may purchase one yourself to enhance data memory. To remove the microSD or SIM card, press in the card gently. The microSD or SIM card ...
Page 8
Charging the Battery Charge your Mobile WiFi the first time you use it or if it has not been used for a long time. Method 1: Using the charge Caution: Only use the charger provided with your Mobile WiFi device. Use of an incompatible charger or one from an unknown manufacturer may cause the Mobile WiFi to malfunction, fail, or could...
Page 9
Method 2: Connecting to a PC for charging Connect the Mobile WiFi to a PC using a compatible data cable.
Accessing the Internet via Wi-Fi Connection By default, management parameters are preset on the Mobile WiFi according to the requirements of the service provider. Follow the steps below to quickly access the Internet. For details on how to set management parameters, see help on the web management page.
Step2: Establish a WiFi Connection Make sure that the WiFi is enabled Select Start > Control Panel > Network Connections > Wireless Network Connection. Note: To set up a WiFi connection, the PC must have a wireless network adapter installed. If Wireless Network Connection is displayed, a wireless network adapter is available.
Step3: Access the Internet After you establish a WiFi connection successfully, you can access the Internet using the following modes. Caution: Please select a proper Internet connection mode based on your service expense. For example, if you are subscribed to the time-based network service, you are recommended to select Manual mode.
Note: Launch the web management page to select the mode for accessing the Internet. You can choose whether to enable the Mobile WiFi to connect to the Internet automatically even while you are roaming. If this function is disabled, the Mobile WiFi automatically disconnects from the Internet while you are roaming.
Daily Use Power Saving Mode If no operation is performed on the Mobile WiFi within a preset period, the screen turns off. Press any key to light up the screen. If the Mobile WiFi is powered by the battery only, choose whether to enable the Mobile WiFi to turn off WiFi automatically.
Establishing a WPS Connection If a WiFi client connected to the Mobile WiFi supports the WPS function, a wireless network key will be automatically generated without manual input. To establish a WPS connection, perform the following steps: Power on the Mobile WiFi. Start the client.
Restoring Factory Defaults If you forget the changes you have made to some parameters, you may restore factory defaults and reconfigure the Mobile WiFi. To restore the factory defaults, press and hold the RESET button until the screen turns off. All factory default settings are successfully restored.
Page 17
Example 1: Wi-Fi Connection to Game Machine (Sony PSP) Turn on the PSP WLAN switch. Select “Settings > Network Settings”. Select “Infrastructure Mode” to connect to your local Wi-Fi access point. Select “New Connection” to specify an easy to remember connection name. Select “Scan”...
Page 18
Note: Press twice consecutively to display the current SSID and wireless network key on the screen. Press the “►“ button of your game machine to continue, and then press the “X” button to save the settings. Select “Test Connection“ to check the connection.
Example 2: WiFi Connection to a Smart Phone (iPhone) Select “Settings > WiFi”, and then turn on WiFi. Automatically detect the networks in range and display the access point list. Select a network indicated by the SSID of the Mobile WiFi. If necessary, enter a password and tap “Join”.
Tips If the Mobile WiFi is placed in an environment with poor ventilation, it may overheat after extended use. When the Mobile WiFi overheats, it will switch off and disconnect from the network automatically to protect itself. If this happens, place the Mobile WiFi in a well-ventilated location, then restart the Mobile WiFi.