hit counter script
Sony SRW-5000 Installation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. VCR
  5. SRW-5000
  6. Installation manual
Sony SRW-5000 Installation Manual

Sony SRW-5000 Installation Manual

Hd digital videocassette recorder
Hide thumbs Also See for SRW-5000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Maintenance Manual, Installation Manual
HD DIGITAL VIDEOCASSETTE RECORDER
SRW-5000
INSTALLATION MANUAL
1st Edition
Serial No. 10001 and Higher

Advertisement

Table of Contents
loading

Related Manuals for Sony SRW-5000

Summary of Contents for Sony SRW-5000

  • Page 1 HD DIGITAL VIDEOCASSETTE RECORDER SRW-5000 INSTALLATION MANUAL 1st Edition Serial No. 10001 and Higher...
  • Page 2 Right, Left: 4 cm (1.6 inches) or more rack is within the specified limit of this product. Rear: 10 cm (4 inches) or more When using a Ethernet cable: For safety,do not connect to the connector for peripheral device wiring that might have excessive voltage. SRW-5000...
  • Page 3 For more information regarding recycling of re- chargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Caution: Do not handle damaged or leaking Lithium-Ion batteries. 1 (P) SRW-5000...

  • Page 5: Table Of Contents

    1-14. Settings when Editor is Connected ............1-21 1-14-1. Settings for Time Code ............1-21 1-14-2. VTR Constant Values Settings of Editor ......... 1-21 1-15. Removing/Reattaching Plug-in Board ............1-22 1-16. Taking Out the Cassette in Tape Slacking ..........1-23 Appendix A Setting Check Sheet SRW-5000...

  • Page 6: Manual Structure

    Related manuals Besides this “installation manual”, the following manuals are available for this unit. If these manuals are required, please contact your local Sony Sales Office/Service Center..Operation Manual (Supplied with this unit.) This manual is necessary for application and operation (and installation) of this unit.

  • Page 7: Installation

    Fix the unit securely to avoid drop when the unit is operat- ed at not-horizontal place. *Operation check If an error message appears on the time data display area, refer to the operation manual. (For more details, refer to the maintenance manual volume 1.) SRW-5000...

  • Page 8: Power Supply

    AC inlet 1-4-2. Recommeded Power Cord This unit does not come with a power cord. To get a power cord, please contact your local Sony Sales Office/Service Center. For customers in the China: 1 Power cord 250 V 10 A (1.8 m):...

  • Page 9: Installation Space

    538.5 (Mass of this unit : approx. 30 kg) 45.5 577(Maximum traveling distance) 153.5 39.5 15.9 12.7 31.5 123.8 263.5 415.9 (38.5) 42.5 457.5 Unit : mm n Remove the feet when rack mounting. Dimensions when Rack-Mounting SRW-5000...

  • Page 10: Rack Mounting

    . When installing the unit in an Outside Broadcasting van, . When mounting this unit into Sony LMS (Library be sure to fix the unit to the rack using the screws and ornamental washers supplied with the rack mount kit.
  • Page 11 Keep these screws, spacers and the feet. When operating the unit after demounting it from the rack, will be unenabled. be sure to reattach the feet. Tightening torque: 98 x 10 N.m {10 kgf.cm} Inner rail B4 x 6 B4 x 6 Inner rail SRW-5000...
  • Page 12 (PSW4 x 16) supplied with the rack mount kit. Ball retainer Tightening torque: 120 x 10 N.m {12.2 kgf.cm} B4 x 8 PSW4 x 16 Rack angle PSW4 x 16 Rack angle PSW4 x 16 SRW-5000...
  • Page 13 50 to 55 mm Rack angle Rail bracket fixing screws B4 x 8 16. To fix the two outer rails to the rack, fully tighten the eight loosely fitted hexagon socket head cap screws in step 12 using the L-shaped hexagon wrench. SRW-5000...
  • Page 14 20. While pressing each stopper of inner rails on both sides, slowly push the unit into the rack. Be careful not to catch your finger or hand in rack mount rail. Ornamental washer RK5 x 14 Stopper Ornamental RK5 x 14 washer Intermediate rail Stopper Inner rail SRW-5000...

  • Page 15: Matching Connectors And Cables

    1-7. Matching Connectors and Cables When external cables are connected to the connector of this unit, the hardware listed below (or equiva- lents) must be used. Panel indication Matching connector (cable) Sony part No. Remarks TIME CODE IN XLR 3P, MALE 1-508-084-00...

  • Page 16: Signal Inputs And Outputs

    D-SUB 9P connector for a HD digital video controller (HKDV-900) connection 4 ETHERNET RJ-45 modular jack Complied with 10BASE-T/100BASE-TX 4 USB USB series B Complied with USB standard Ver 1.1 * : Refer to Optional “Interface manual” for details. 1-10 SRW-5000...
  • Page 17 Applicable memory stick : 8 MB to 128 MB The memory card (PCMCIA type) can be used by removing the memory stick adaptor under the lower control panel. For removing the memory stick adaptor, refer to the maintenance manual volume 1. 1-11 SRW-5000...
  • Page 18 EJECT OUT EJECT STATUS ANALOG/DIGITAL ANALOG/DIGITAL STATUS REEL HUB REEL HUB STATUS REM2 SETTING DATA RESET REMOTE2 SETTING DATA RESET STATUS ALL REC INHIBIT ALL REC INHIBIT STATUS —— —— PLAY CLOSURE SW (PLAY) STOP CLOSURE SW (STOP) (Continue) 1-12 SRW-5000...
  • Page 19 TXD ; Transmitted Data (Output) DTR ; Data Terminal Ready (Output) PRIORITY SG ; Signal Ground DSR ; Data Set Ready (Input) RM TX(+) RTS ; Request to Send (Output) RM RX(_) CTS ; Clear to Send (Input) 1-13 SRW-5000...

  • Page 20: Switch Settings On Connector Panel

    ETHERNET: RJ-45 modular jack Standard : Complied with IEEE 802.3u (100BASE-TX) . 75 Z termination switch of reference video input and IEEE 802.3 (10BASE-T) External view Pin No. Signal TXD (+) TXD (_) RXD (+) — — RXD (_) — — 1-14 SRW-5000...

  • Page 21: Switch Settings On Circuit Boards

    Output level (600 Z Z Z Z Z )/Output headroom S1200 S2200 S3200 S4200 +4 dBm/_20 dBm _3 dBm/_18 dBm +1 dBm/_18 dBm 0 dBm/_18 dBm (Factory setting) S1300 S2300 0 dBm/_12 dBm +4 dBm/_18 dBm +4 dBm/_16 dBm +6 dBm/_20 dBm 1-15 SRW-5000...

  • Page 22: Cue-13 Board

    < Top View > CUE-13 Board (Side A) CUE output level settings Ref. No. Switches state (\ \ \ \ \ : Knob position) S101 +4 dBm/600 Z 0 dBm/600 Z _3 dBm/600 Z _20 dBm/600 Z (Factory setting) 1-16 SRW-5000...

  • Page 23: System Setting

    *2 : If the signal is played back at a different system frequency from REC, the audio may be muted. *3 : The video output signal is converted to the system scanning method selected by the system of this unit. 1-17 SRW-5000...
  • Page 24 [F4]SYSTEM SIGNAL MODE 422 29.97Hz SYSTEM FREQ 30Hz [F6]FRAME CONVERT 1080/59.94i 50Hz [F7]ACTIVE LINE 1080 SYSTEM 59.94Hz [F8]CANCEL [F9]Exec of Reset VTR Sys SIGNAL 60Hz (STOP & STANDBY OFF/EJECT) FRAME ACTIVE CANCEL EXEC EXIT DIAG CNVERT LINE F9 F10 1-18 SRW-5000...

  • Page 25: Opening/Closing The Lower Control Panel

    Close the Lower Control Panel While lifting the outer stay by the forefinger, close the lower control panel as shown in the figure. (3) Check that the system is restarted, and turn OFF the POWER switch and turn ON again. Outer stay 1-19 SRW-5000...

  • Page 26: Reference System

    No signal is input to the HD SDI INPUT A connector when the REC/EDIT mode. No reference signal is input to REF. INPUT connector when the PB mode. Table 1-13-1. Reference System ITEM-005 setting external auto input Operation mode PB/EDIT/REC EDIT PB/EDIT/REC Selected reference signal REF. INPUT HD SDI INPUT A 1-20 SRW-5000...

  • Page 27: Settings When Editor Is Connected

    VTR constant values is connected. Table 1-14-2. VTR Constant Values Settings of Editor VTR CONSTANT 1 VTR CONSTANT 2 Data No. Data No. Frame rate 59.94, 29.97P 50, 25P 24P, 23.98P (Standard value is expressed in hexadecimal.) 1-21 SRW-5000...

  • Page 28: Removing/Reattaching Plug-In Board

    Upper lid (front) assembly Knob Fixing screw 6. Open the eject levers on both ends of the board in the direction of the arrows. 7. Hold the eject levers and slowly pull the board out. Pulling out Insertion Removal Installation 1-22 SRW-5000...

  • Page 29: Taking Out The Cassette In Tape Slacking

    2. Slide the knobs on upper lid (front) assembly each in the inside. (Move the knobs to the outside to fix the upper lid (front) assembly. 3. Remove the upper lid (front) assembly. Knob Upper lid (front) assembly Knob Fixing screw Removal Installation 1-23 SRW-5000...
  • Page 30 8. Pull the ME wire for a few times with short steps in the arrow direction on the EJECT label to take up the tape inside the cassette. AE-31 board Board holder M gear EJECT EJECT label label ME wire Wire holder Gear box assembly 1-24 SRW-5000...

  • Page 31: Appendix A Setting Check Sheet

    Write down the value of hours meter when checking, servicing, and maintaining. ITEM Date Hours meter H01: OPERATION HOURS H02: DRUM RUNNING HOURS H03: TAPE RUNNING HOURS H04: THREADING COUNTER H12: DRUM RUNNING HOURS (Resettable) H13: TAPE RUNNING HOURS (Resettable) H14: THREADING COUNTER (Resettable) SRW-5000...
  • Page 32 +6 dBm/_16 dB only 8-bit to ON +4 dBm/_20 dB dBm/ Monitor output level/ S1300 output headroom +4 dBm/_20 dB dBm/ S2300 +4 dBm/_20 dB dBm/ CUE-13 CUE audio output level — S101 +4 dBm/600 Z dBm/600 Z) (Continued) SRW-5000...
  • Page 33 Board Switch No. Factory setting Board Switch No. Factory setting APR-62 S400 IRC-5 S400 S701 S700 CP-382 S800 SS-95 S100 S300 S101 EQ-94 S2201 S500 S2901 S501 HIF-8 S900 S600 HPR-8 S200 S802 S600 VPR-79 S100 S2000 S700 (Continued) SRW-5000...
  • Page 35 The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.
  • Page 36 Printed in Japan Sony Corporation SRW-5000 (SY) E 2003. 6 08 B&P Company 3-791-086-01 ©2003...

Table of Contents