Sony CFD-S550 Service Manual
Cd radio cassette-corder
Hide thumbs
Also See for CFD-S550:
- Operating instructions (2 pages) ,
- Specifications (2 pages) ,
- Limited warranty (1 page)
Table of Contents
Advertisement
Quick Links
SERVICE MANUAL
Ver. 1.3 2006.02
AUDIO POWER SPECIFICATIONS (US model)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 3.2-ohm loads, both channels driven from
150 - 6,300 Hz; rated 1.8 W per channel-
minimum RMS power, with no more than 10%
total harmonic distortion in AC operation.
Other Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20,000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Sony Corporation
9-877-082-04
2006B04-1
Personal Audio Division
© 2006.02
Published by Sony Techno Create Corporation
CFD-S550
Model Name Using Similar Mechanism CFD-S200
CD
CD Mechanism Type
Section
Optical Pick-up Name
Model Name Using Similar Mechanism CFD-S200
TC
Section Tape Transport Mechanism Type
SPECIFICATIONS
Radio section
Frequency range
FM: 87.5 - 108 MHz
US, CND, E92, MX model:
AM: 530 - 1,710 kHz
EA, KR, SP model:
AM: 531 - 1,611 kHz (9 kHz step)
530 - 1,610 kHz (10 kHz step)
IF
FM: 10.7 MHz
AM: 450 kHz
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 120 sec. with Sony cassette C-60
Frequency response
TYPE I (normal): 80 - 10,000 Hz
CD RADIO CASSETTE-CORDER
US Model
Canadian Model
E Model
KSM-213RDP
KSS-213R
MF-S200
– Continued on next page –
1
Advertisement
Table of Contents
Related Manuals for Sony CFD-S550
Summary of Contents for Sony CFD-S550
- Page 1 Laser output: Less than 44.6 µW Fast winding time (This output is the value measured at a distance of Approx. 120 sec. with Sony cassette C-60 about 200 mm from the objective lens surface on Frequency response the optical pick-up block with 7 mm aperture.)
- Page 2 LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
-
Page 3: Table Of Contents
CFD-S550 Ver. 1.3 SAFETY CHECK-OUT (US MODEL) TABLE OF CONTENTS After correcting the original service problem, perform the following safety check before releasing the set to the customer: 1. SERVICING NOTES ............4 Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. -
Page 4: Servicing Notes
CFD-S550 SECTION 1 SERVICING NOTES LASER DIODE AND FOCUS SEARCH OPERATION CHUCK PLATE JIG ON REPAIRING CHECK 1. Turn ON the [POWER] button and press [CD] button to CD On repairing CD section, playing a disc without the lid (CD), use position. -
Page 5: General
CFD-S550 SECTION 2 GENERAL This section is extracted from instruction manual. Location of controls Remote Control Loading a CD Inserting a cassette With the side you want SLEEP to play facing you POWER FUNCTION Number buttons With the labeled side up MODE VOL +*,–... -
Page 6: Disassembly
CFD-S550 SECTION 3 DISASSEMBLY • The equipment can be removed using the following procedure. 3-1. CABINET (UPPER) ASSY (Page 7) 3-2. CABINET (FRONT) ASSY, 3-10. CD LID 3-11. CD BLOCK ASSY CABINET (REAR) ASSY (Page 11) (Page 12) (Page 7) 3-12. -
Page 7: Cabinet (Upper) Assy
CFD-S550 Note : Follow the disassembly procedure in the numerical order given. 3-1. CABINET (UPPER) ASSY 2 screw (2.6) handle 3 screw (2.6) CD lid 4 screw (2.6) 9 cabinet (upper) assy 1 BTP 2.6x10 6 CNP804 8 CNP808 5 connector... -
Page 8: Wires
CFD-S550 3-3. WIRES Put flat cable and wires between the cabinets and push them in the grooves located at A to E in the figure to prevent disconnection before assembling the set. from HEADPHONE board cabinet front cabinet rear 3-4. MD BLOCK 1 BVTP 2.6x8... -
Page 9: Holder (Cassette)
CFD-S550 3-5. HOLDER (CASSETTE) 1 BVTP 2.6x8 2 damper 4 spring (cassette) 3 holder (cassette) 3-6. LCD BOARD 1 BVTP 2.6x8 3 LCD board 2 BVTP 2.6x8 4 bracket (LCD board) -
Page 10: Main Board
CFD-S550 3-7. MAIN BOARD 6 BVTP 2.6x8 7 MAIN board 1 PWH 2.6x10 2 HEADPHONE board 3 CNP322 4 CNP902 5 CNP1 3-8. TUNER BOARD 2 telescopic antenna 1 B 3x8 TU chassis 4 BVTP 2.6x8 7 TUNER board 3 CNP1... -
Page 11: Power Board, Vol Sel Board
CFD-S550 3-9. POWER BOARD, VOL SEL BOARD 0 POWER board 7 BVTP 2.6x8 1 BVTP 2.6x10 8 BVTP 2.6x8 2 chassis (VOL PWB) 6 CNP901 9 BVTP 2.6x8 3 BTP 2.6x6 5 CNP902 4 VOL SEL board Saudi Arabia model only 3-10. -
Page 12: Cd Block Assy
CFD-S550 3-11. CD BLOCK ASSY 3 CD cover claws claws 4 CD block assy 2 PWH 2.6x10 1 PWH 2.6x10 3-12. OPTICAL PICK-UP 6 optical pick-up 5 sled shaft claw 1 gear (A) 2 PWB tapping (M2) 3 PWB tapping (M2) -
Page 13: R/P Head (Hrp301), Tc Board
CFD-S550 3-13. R/P HEAD (HRP301), TC BOARD 4 Removal the solders. claws 2 BVTT 2x4 3 TC board 1 R/P head (HRP301) 3-14. MOTOR ASSY (M801), MAIN BELT (B), SUB BELT (B) 6 motor assy (M801) motor bracket 3 main belt (B) 5 pan M2.6x4.5... -
Page 14: Mechanical Adjustments
CFD-S550 SECTION 4 SECTION 5 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS PRECAUTION TAPE SECTION 0 dB = 0.775 V 1. Clean the following parts with a denatured-alcohol-moistened swab : • Standard Output Level record/playback head pinch roller Output terminal HP OUT erase head rubber belts 32 Ω... -
Page 15: Tuner Section
CFD-S550 TUNER SECTION 0 dB = 1 µV FM IF ADJUSTMENT • FM Section Adjust for a maximum reading on level meter. Setting: RADIO BAND•AUTO PRESET button: FM 10.7 MHz FM RF signal generator FM FREQUENCY COVERAGE TP (FM IN) ADJUSTMENT 0.01 µ... -
Page 16: Cd Section
CFD-S550 Adjustment Location: CT3, L3 TRACKING ADJUSTMENT – MAIN board (component side) – TP (VT) (CONDUCTOR SIDE) CT1, L1 TP (FM IN) TRACKING (CONDUCTOR SIDE) ADJUSTMENT ADJUSTMENT FREQUENCY COVERAGE ADJUSTMENT ADJUSTMENT FREQUENCY COVERAGE ADJUSTMENT CD SECTION CD section adjustments are done automatically in this set. -
Page 17: Diagrams
CFD-S550 SECTION 6 DIAGRAMS 6-1. IC PIN DESCRIPTION • IC802 uPD789477GC-A27-8BT (SYSTEM CONTROLLER) Pin No. Pin Name Pin Description Pin No. Pin Name Pin Description 1, 2 — Not used. (Open) Main system oscillation output (4.19 MHz) 3 to 5... -
Page 18: Block Diagram - Cd Section
CFD-S550 6-3. BLOCK DIAGRAM — CD SECTION — LCHO INTERPOLATION CD_IN_ L SLICE ERROR MUTE DIGITAL FIN2 EFMIN (Page 19) LEVEL CORRECTION & FILTER CONTROL AUDIO CD ATTENUATION & RCHO CD_IN_R DEEMPHASIS 1-bit DAC PH/BH AUDIO DOUT FIN1 CLV,CAV RF AMP,... -
Page 19: Block Diagram - Main Section
CFD-S550 6-4. BLOCK DIAGRAM — MAIN SECTION — US,CND MODEL Q205 J303 LINE IN US,CND MODEL Q111 IC303 R.RO ELECTRONIC VOLUME Q204 R.IN R.LINE REC/PB POWER AMP CD_IN_R PRE AMP IC304 R-CH (Page 18) IC301 L.RO VOL AMP J321 ALC 2... -
Page 20: Printed Wiring Board - Cd Section
CFD-S550 6-5. PRINTED WIRING BOARD — CD SECTION — • Refer to page 17 for Circuit Boards Location. THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) Common Note on Schematic Diagrams: •... -
Page 21: Schematic Diagram - Cd Section
CFD-S550 6-6. SCHEMATIC DIAGRAM — CD SECTION — • Refer to page 20 for Common Note on Schematic Diagrams and page 33 for IC Block Diagrams. C727 C726 C724 C725 C721 R717 C730 C720 R716 R728 R727 C722 R718 C723... -
Page 22: Printed Wiring Board - Tuner Section
CFD-S550 6-7. PRINTED WIRING BOARD — TUNER SECTION — • Refer to page 17 for Circuit Boards Location and page 20 for Common Note on Printed Wiring Boards. (Page 24) (Page 24) 1-688-455- (11) • Semiconductor Location Ref. No. Location... -
Page 23: Schematic Diagram - Tuner Section
CFD-S550 6-8. SCHEMATIC DIAGRAM — TUNER SECTION — • Refer to page 20 for Common Note on Schematic Diagrams and page 34 for IC Block Diagrams. JC12 JC11 C51 C52 JC24 IC B/D IC B/D JC13 ANT1 CNP2 CNP1 (Page 25) -
Page 24: Printed Wiring Boards - Main Section
CFD-S550 6-9. PRINTED WIRING BOARDS — MAIN SECTION — • Refer to page 17 for Circuit Boards Location and page 20 for Common Note on Printed Wiring Boards. (Page 20) J321 C111 D323 JW366 R112 C212 C211 C324 C210 Q224... -
Page 25: Schematic Diagram - Main Section (1/2)
CFD-S550 6-10. SCHEMATIC DIAGRAM — MAIN SECTION (1/2) — • Refer to page 20 for Common Note on Schematic Diagrams, page 24 for Waveforms and page 35 for IC Block Diagrams. R120 R220 C220 Q205 R221 CNP808 JC318 R121 R321... -
Page 26: Schematic Diagram - Main Section (2/2)
CFD-S550 6-11. SCHEMATIC DIAGRAM — MAIN SECTION (2/2) — • Refer to page 20 for Common Note on Schematic Diagrams and page 35 for IC Block Diagrams. R104 C105 D323 C323 R323 R324 C324 R215 R115 C101 C104 IC B/D... -
Page 27: Printed Wiring Board - Tc Section
CFD-S550 6-12. PRINTED WIRING BOARD — TC SECTION — • Refer to page 17 for Circuit Boards Location and page 20 for Common Note on Printed Wiring Boards. T301 C308 C307 C310 C305 R307 R308 C304 R306 C306 CN303 IC301... -
Page 28: Schematic Diagram - Tc Section
CFD-S550 6-13. SCHEMATIC DIAGRAM — TC SECTION — • Refer to page 20 for Common Note on Schematic Diagrams and page 35 for IC Block Diagrams. IC301 R103 R112 IC B/D R301 R102 C102 C103 R104 R111 C301 C104 C101... -
Page 29: Printed Wiring Boards - Control Section
CFD-S550 6-14. PRINTED WIRING BOARDS — CONTROL SECTION — • Refer to page 17 for Circuit Boards Location and page 20 for Common Note on Printed Wiring Boards. (Page 24) (Page 24) D402 FFC411 (Page 24) S431 R444 R447 R437... -
Page 30: Schematic Diagram - Control Section
CFD-S550 6-15. SCHEMATIC DIAGRAM — CONTROL SECTION — • Refer to page 20 for Common Note on Schematic Diagrams. CNP410 FFC408 CNP401 FFC402 JC411 JC401 JC410 R459 CNP409 FFC411 S417 R458 D404 D401 D402 D403 S438 FFC403 R434 R427 S425... -
Page 31: Printed Wiring Boards - Power Supply Section
CFD-S550 6-16. PRINTED WIRING BOARDS — POWER SUPPLY SECTION — • Refer to page 17 for Circuit Boards Location and page 20 for Common Note on Printed Wiring Boards. CNP904 JW901 JW902 J901 JW904 (Page 24) CNP902 (Page 24) CNP901... -
Page 32: Schematic Diagram - Power Supply Section
CFD-S550 6-17. SCHEMATIC DIAGRAM — POWER SUPPLY SECTION — • Refer to page 20 for Common Note on Schematic Diagrams. CNP902 T901 (Page 26) JW904 JW903 C901 D901 J901 JW908 F902 D902 JW907 C902 C903 F901 CNP901 CNB901 D903 TP901... -
Page 33: Ic Block Diagrams
CFD-S550 6-18. IC BLOCK DIAGRAMS IC701 LC78646E-E (CD Board) 78 77 76 75 74 73 72 71 69 68 67 66 65 64 63 62 61 FIN1 – FIN2 – TIN1 TBAL – – TIN2 – – TBAL – RFMON... - Page 34 CFD-S550 IC702 BA5826FP-E2 (CD Board) IC1 TA2149BN (TUNER Board) GND1 FM RF-OUT FM RF SP– D.BUFF VCC1 FM RF-IN SL– AM RF-IN D.BUFF AM LOW CUT LEVEL D.BUFF SHIFT MIX OUT FM OSC D.BUFF SPIN LEVEL SHIFT AM OSC BUFF...
- Page 35 CFD-S550 IC803 CAT24WC02JI-1.8-TE13 (MAIN Board) 1K BIT EEPROM ARRAY 8BIT 7BIT SLAVE • WORD ADDRESS DATA ADDRESS 7BIT DECODER REGISTER REGISTER START STOP CONTROL CIRCUIT HIGH VOLTAGE POWER SUPPLY OCCURENCE CIRCUIT VOLTAGE DETECTION IC303 BD3870FS (MAIN Board) TREBLE1 TREBLE2 BASS2...
-
Page 36: Exploded Views
CFD-S550 SECTION 7 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Color Indication of Appearance Parts The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. Example : 0 are critical for safety. -
Page 37: Cabinet (Front) Section
CFD-S550 7-2. CABINET (FRONT) SECTION SP301 supplied LCD401 MD block supplied supplied SP302 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3382-906-1 CABINET (FRONT) SUB ASSY (US) 3-248-288-31 BUTTON (PAUSE), MD X-3382-907-1 CABINET (FRONT) SUB ASSY (EXCEPT US) -
Page 38: Cabinet (Upper) (1) Section
CFD-S550 7-3. CABINET (UPPER) (1) SECTION S801 KSM-213RDP not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-923-736-01 COVER, CD 3-019-395-01 PLATE, CHUCKING 3-931-379-21 RUBBER, VIBRATION PROOF 1-452-899-11 MAGNET 3-931-379-31 RUBBER, VIBRATION PROOF 3-248-297-71 LID, CD 3-921-725-11 SCREW (2.6X10), +PWH... -
Page 39: Cabinet (Upper) (2) Section
CFD-S550 7-4. CABINET (UPPER) (2) SECTION not supplied not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * 151 A-3347-782-A SOUND BOARD, COMPLETE * 159 A-3347-775-A TEN KEY BOARD, COMPLETE... -
Page 40: Cabinet (Rear) Section
CFD-S550 Ver 1.1 7-5. CABINET (REAR) SECTION ANT1 not supplied F901 T901 F902 not supplied not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. -
Page 41: Tape Mechanism Section
CFD-S550 7-6. TAPE MECHANISM SECTION not supplied M801 not supplied HRP301 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-244-086-01 ARM, PINCH ROLLER 3-237-719-01 CHASSIS, TC 3-244-079-01 BELT (B), SUB 3-030-741-01 SCREW (M2X2) 3-244-080-01 BELT (B), MAIN... -
Page 42: Cd Mechanism Section
CFD-S550 7-7. CD MECHANISM SECTION (KSM-213RDP) M701 M702 The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piéce... -
Page 43: Electrical Parts List
CFD-S550 SECTION 8 BATTERY (1) ELECTRICAL PARTS LIST BATTERY (2) NOTE: • Due to standardization, replacements in • Items marked “*” are not stocked since The components identified by mark 0 or dotted line with mark the parts list may be different from the they are seldom required for routine service. - Page 44 CFD-S550 CD BUTTON FUNCTION KEY POWER KEY HEADPHONE Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R703 1-216-835-11 METAL CHIP 1/10W R452 1-216-825-11 METAL CHIP 2.2K 1/10W R704 1-216-835-11 METAL CHIP 1/10W R453 1-216-821-11 METAL CHIP...
- Page 45 CFD-S550 HEADPHONE LINE IN MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > A-3347-813-A MAIN BOARD, COMPLETE (US,CND) A-3347-993-A MAIN BOARD, COMPLETE (E92,MX) R116 1-216-809-11 METAL CHIP 1/10W A-3683-327-A MAIN BOARD, COMPLETE (KR)
- Page 46 CFD-S550 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C321 1-104-665-11 ELECT 100uF CNP808 1-815-446-11 PIN, CONNECTOR (PWB) 5P (US,CND) C322 1-126-947-11 ELECT 47uF C323 1-126-964-11 ELECT 10uF < DIODE > C324 1-164-245-11 CERAMIC CHIP 0.015uF...
- Page 47 CFD-S550 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < COIL > R142 1-216-825-11 METAL CHIP 2.2K 1/10W (US,CND) L801 1-414-137-31 INDUCTOR 0.22uH R204 1-216-825-11 METAL CHIP 2.2K 1/10W L802 1-410-521-11 INDUCTOR 100uH R205 1-216-825-11 METAL CHIP 2.2K...
- Page 48 CFD-S550 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R813 1-216-829-11 METAL CHIP 4.7K 1/10W R858 1-216-829-11 METAL CHIP 4.7K 1/10W R814 1-216-829-11 METAL CHIP 4.7K 1/10W R859 1-216-821-11 METAL CHIP 1/10W R815 1-216-829-11 METAL CHIP 4.7K...
- Page 49 CFD-S550 Ver 1.1 MAIN POWER SOUND Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X802 1-795-866-21 VIBRATOR, CERAMIC (4.19MHz) < DIODE > ************************************************************* D401 6-500-655-01 LED SLI-343DC3FW (VOCAL) A-3347-776-A POWER BOARD, COMPLETE (US) D402 6-500-655-01 LED SLI-343DC3FW (JAZZ)
- Page 50 CFD-S550 TEN KEY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C307 1-162-964-11 CERAMIC CHIP 0.001uF R315 1-216-817-11 METAL CHIP 1/10W C308 1-162-927-11 CERAMIC CHIP 100PF C310 1-164-230-11 CERAMIC CHIP 220PF < SWITCH > < CONNECTOR >...
- Page 51 CFD-S550 Ver 1.1 TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3683-859-A TUNER BOARD, COMPLETE (EA,KR,SP) 1-126-963-11 ELECT 4.7uF A-3683-865-A TUNER BOARD, COMPLETE (US,CND,E92,MX) 1-162-927-11 CERAMIC CHIP 100PF 1-162-927-11 CERAMIC CHIP 100PF ********************** 1-162-968-11 CERAMIC CHIP 0.0047uF 10%...
- Page 52 CFD-S550 Ver. 1.2 TUNER VOL SEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-216-817-11 METAL CHIP 1/10W S427 1-786-050-21 SWITCH, KEYBOARD (MEGA Xpand) 1-216-833-11 METAL CHIP 1/10W S428 1-786-050-21 SWITCH, KEYBOARD (MEGA BASS) 1-216-833-11 METAL CHIP...
- Page 53 CFD-S550 US Model Canadian Model SERVICE MANUAL E Model Ver 1.1 2004. 09 SUPPLEMENT-1 File this supplement with the service manual. Subject: Change of CD Mechanism Block (KSM-213RDP→KSM-213CDP) (SPM-04041) CD mechanism block is changed from KSM-213RDP to KSM-213CDP in the midway of production.
- Page 54 CFD-S550 CD MECHANISM SECTION (KSM-213CDP) not supplied not supplied (M701 (SPINDLE)) M702 The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité.
- Page 55 CFD-S550 MEMO...
- Page 56 CFD-S550 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2003.02 2004.09...