STR-SE581 SERVICE MANUAL US Model Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby” “Pro Logic” and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation. SPECIFICATIONS Audio power specifications Outputs TAPE/MD REC OUT: Voltage: 150 mV, POWER OUTPUT AND TOTAL HARMONIC DISTORTION Impedance: 10 kΩ...
MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE Earth Ground COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS Fig. A. Using an AC voltmeter to check AC leakage.
Page 3
SECTION 1 GENERAL LOCATION AND FUNCTION OF CONTROLS [FRONT PANEL] 2 #£ 3 4 5 !• !¶ !§ !¢ !£ #™ #¡ #º @• @§ @ª @¶ @∞ @¢ @£ @™ @¡ @º !ª !∞ !™ !¡ !º !• POWER switch (I/u) VIDEO FUNCTION button !ª...
Page 4
[REAR PANEL] 1 2 !¢ !∞ !™ 7 8 9 !§ !¡ !£ SIGNAL GND VIDEO 5.1/DVD INPUT (FRONT/REAR) SURROUND SPEAKERS (REAR) !¡ WOOFER FRONT SPEAKERS !™ ANTENNA (AM/FM) AC OUTLET !£ PHONO AC power code !¢ 5.1/DVD INPUT (CENTER) !∞...
SECTION 2 SECTION 3 TEST MODE DIAGRAMS INITIALIZATION MODE AM CHANNEL STEP 9 kHz/10 kHz 3-1. CIRCUIT BOARDS LOCATION All preset contents are cleared when this mode is activated. Use SELECTION MODE this mode before returning the product to clients upon SECONDARY BOARD Either the 9 kHz step or 10 kHz step can be selected for the AM completion of repair.
STR-SE581 3-6. PRINTED WIRING BOARD — MAIN SECTION — • Semiconductor TM601 Location SURROUND SPEAKERS TM701 TAPE /MD VIDEO FRONT SPEAKERS REAR CENTER Ref. No. Location PHONO REC OUT TV/DBS AUDIO OUT AUDIO IN MAIN ANTENNA D311 BOARD D312 D560...
STR-SE581 3-9. SCHEMATIC DIAGRAM — MAIN SECTION (2/3), SP-SW — • See page 15 for MAIN Board Printed Wiring Board. • See page 27 for IC Block Diagrams. — 21 — — 22 —...
STR-SE581 3-10. SCHEMATIC DIAGRAM — MAIN SECTION (3/3), POWER — • See page 15 for MAIN Board Printed Wiring Board. • See page 19 for SECONDARY/PRIMARY/STANDBY Board Printed Wiring Boards. • See page 27 for IC Block Diagrams. CN902 — 23 —...
3-11. IC PIN FUNCTION DISPLAY BOARD IC201 : µPD78044FGF-064-3B9 (DISPLAY CONTROL) Pin No. Pin Name Description DIG7 DIG6 DIG5 DIG4 Fluorescent indicator tube drive. DIG3 DIG2 DIG1 — Power supply (+5V). S. CLK System clock. S. DATA System data. PLL. DATA PLL data input from TU001.
Page 16
Pin No. Pin Name Description VOLUME UP Volume up. VOLUME DOWN Volume down. STANDBY — Standby LED drive. SYS. POWER System power ON/OFF. RDS. DATA. IN RDS data input terminal (EXCEPT Australian, E, Saudi Arabia, PX model). RDS. CLK. IN RDS clock input terminal (EXCEPT Australian, E, Saudi Arabia, PX model).
SECTION 5 DISPLAY ELECTRICAL PARTS LIST Note: • -XX, -X mean standardized parts, so they may • COILS When indicating parts by reference number, have some difference from the original one. uH: µH please include the board name. • Items marked “*” are not stocked since they •...