Thank you for purchasing our ceiling fan. This product has been 52 Chamblee manufactured with the highest standards of safety and quality. Ceiling Fan by Hampton Bay Date Purchased Table of Contents Store Purchased Safety Rules ....1 Unpacking Your Fan .
Safety Rules - Read and Save These Instructions After making electrical connections, spliced conductors should be To reduce the risk of electric shock, ensure electricity has been turned upward and pushed carefully up into outlet box. The wires turned off at the circuit breaker or fuse box before beginning. should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and All wiring must be in accordance with the National Electrical...
Unpacking Your Fan Unpack your fan and check the contents. You should have the following items: Fan blades (5) CFL bulbs(2) 12. Loose parts bag containing: Mounting bracket (1) Glass shade (1) A . Blade attachment hardware Canopy (1) (16 screws and paper washers) Canopy cover (1) B.
Installing Your Fan Provide Strong Support Tools Required Figures 1~3 are examples of different ways to mount the outlet box. Phillips screwdriver, straight slot screwdriver, step ladder and wire cutters. Recessed Ceiling Outlet Box Mounting Plate Figure 3 Mounting Options Note: You may need a longer downrod to Outlet Box maintain proper blade clearance when...
6. Now lift motor assembly into position and place Hanging the Fan Lead Wires hanger ball into mounting bracket. Rotate until the check groove drops into the registration slot and Ball/downrod REMEMBER to turn off the power. Follow the Assembly seats firmly.
Figures 12 and Figures 13 illustrate the wiring Connections connections for optional wall control (available at your Ground Hampton Bay Retailer, the wire color out of wall control Conductor Remember to shut off the power. may vary, see wall control's installation manual for correct...
Finishing the Installation SUPPLY CIRCUIT SUPPLY CIRCUIT 1. Tuck connections neatly into ceiling outlet box. Ground Ground 2. Remove one screw from the mounting bracket and Conductor Conductor Light loosen the other screw around 1/4″. Outlet Box Outlet Box 3. Align the canopy up to ceiling and over the loose screw.
Page 10
The following procedure should correct most A t t a c h i n g t h e F a n fan wobble issues. Check after each step. Motor housing Blades 1. Check that all blades and blade holder screws are secure. 1.
Installing the Light Kit Housing 5. Remove the rubber washer, metal washer, CAUTION To Reduce The Risk Of Electric metal nut, metal cap and finial from the light Shock, Disconnect The Electrical Supply kit assembly. Place glass shade over the light Circuit To The Fan Before Installing Light Switch box...
Fan without Light Kit Speed settings for warm or cool weather depend on factors such as the room size, 1.Disassemble the switch box cover from ceiling height, number of fans, etc. the light kit by loosening the screws (Keep the screws for future use). The Reverse switch is located on the switch box.
MAKE SURE THE POWER IS OFF AT THE ELECTRICAL PANEL BOX bearings.1.2.3.4. BEFORE YOU ATTEMPY ANY REPAIRS. REFER TO THE SECTION, “MAKING ELECTRICAL CONNECTIONS”. For any additional information on your Hampton Bay Ceiling Fan, please write to: Summerwind International, LLC. 751 Port America Place, Suite 850 Grapevine, TX 76051-8301...
Specifications FAN SIZ E SPEED VOLT S AMPS WATT S N.W. G.W. C.F. 10.2 1852 0.218 32.6 7.86kgs 9.27kgs 2.08 0.398 3437 17.33lbs 20.44lbs 0.523 HIGH 62.2 4787 These are approximate measures. They do not include Amps and Wattage used by the light kit. Distributed by Your Other Warehouse, LLC 12100 Little Cayman...
Hampton Bay Ceiling Fan, please write to: correct such defects without charge or at our option replace with a comparable or superior model if the product is returned to Hampton Bay. To obtain warranty service, you must present a copy of the Summerwind International, LLC.