Sign In
Upload
Manuals
Brands
Canon Manuals
Printer
imageRUNNER ADVANCE C2225G
Canon imageRUNNER ADVANCE C2225G Manuals
Manuals and User Guides for Canon imageRUNNER ADVANCE C2225G. We have
1
Canon imageRUNNER ADVANCE C2225G manual available for free PDF download: Technical Workbook
Canon imageRUNNER ADVANCE C2225G Technical Workbook (175 pages)
Brand:
Canon
| Category:
Printer
| Size: 16.55 MB
Table of Contents
Table of Contents
5
Foggy Image / Ghost Image / Solid Image
8
Ghost Image Occurs Due to Remained Toner on the Primary Charging Roller
8
Fogging Occurs on the Whole Image
15
Foggy Image in Magenta/Poor Density on Solid Image
15
Ghosting at a 94Mm Pitch
16
Water Drop Marks on 2Nd Side of 2-Sided Print Occurred in 2-Sided Printing after Continuous 1-Sided Printing (3 WAY UNIT-C1)
17
Lines on Image in the Sub-Scanning Direction Due to the Deformation of the Contact Spring on the Drum Unit
18
Lines Occur at Approximately 30Mm from the Leading Edge of Paper, in the Main Scanning Direction Due to the Deformation of the Pre-Fixing Guide Sheet
19
Lines at 30Mm from the Leading Edge of Paper in the Main Scanning Direction Due to Stained Paper Feed Paths
21
Fixing Assembly Jam / Delivery Jam
22
Jam Code Occurs Due to the Delivery Roller Bushing Coming off
22
1101/1001/020B Jam Code/ Dog-Ear on Delivered Paper (Inner Finisher -C1)
23
010B Jam Code Displays While the 3 Way Unit-C1 Is Being Installed
26
Jam Code Occurs after Installation of the 3 Way Unit-C1
27
Jam Code Due to Detached First Delivery Sensor Flag Spring
28
Pick-Up Jamming
29
0102 Jam Code Due to the Shape of the Retard Joint
29
0103/0104 Jam Codes Due to the Shape of the Retard Joint (Cassette Feeding Unit-AF1)
34
0105 Jam Code Occurs Due to the Detached Registration Sensor
39
0105 Jam Code Due to Floating Cassette 1 Separation Roller Unit
45
0105 Jam Code Due to Failure of Gear Engagement When the Multi-Purpose Tray Is Used
46
0D91/0205 Jam Code Occurs on a Machine with a Version of System Software Earlier than Ver.24.03 Due to a Wrong Paper Size Setting for the Multi-Purpose Tray
52
Feeder Jamming
53
Last Sheet of Multiple-Sheet Document Not Picked up (DADF-AC1)
53
Recovers from Sleep Mode
55
0004/0005/0006 Jam Code (Measure against Double Feeding Jam When the Document Is Fed by ADF)
56
E020
57
E020-0X60/E020-1X60 /340001/340002/340006 Alarm Code Due to the Tension Spring Coming off
57
E020-0091/E020-0191/E020-0291/E020-0391 Due to the Inadequate Fitting of the Contact Holder Unit
58
E020-0360 Due to the Break in the Harness for the Registration Patch Sensor When the Main Power Is Turned on
60
E020-1360 Occurs Due to the Dust on the Dustproof Glass
63
E020-0X60/E020-0X91/E020-0Xb1 Due to Stained Toner Level Detection Area
65
E020-1360 Occurred Due to the Screw of the Inner Middle Panel in the Machine Coming off or Getting Loose
70
E020-0120 Occurs Due to the Stuck Coupling of the Drum Unit Upon Inserting the Drum Unit
70
E020-0X90 Upon Installation Due to the Return Failure of a Contact Spring on the Developing Bias
71
E020-0X90 /Abnormal Noise/Toner Leakage Occurs at the Time of Installation Due to the Displacement of Gear Inside the Drum Unit Cover
72
E020-1260 Displays Because the Dustproof Shutter Is Not Open
74
E020-0360 Occurs Due to an Installation Error of the Bk Hopper Unit
74
Noise from Fixing Assembly, Fixing Drive Assembly and the Right Door Assembly
76
Noise at the Time of Turning on the Main Power/Recovery from Sleep/Duplex Printing Due to Contact between the Duplex Drive Gear and the Right Door Detection Holder
76
Abnormal Noise (Rattling) Due to Drive Gear Breakage in Delivery Assembly
80
Abnormal Sound Due to the Chipped off Gear Inside the Fixing Assembly
81
Main Power/Transition to Sleep Mode/Occurrence of Jam/Error
88
Light Image / Faulty Density / Faulty Color Reproduction
95
Faulty Image Where Specific Color of Toner Does Not Get Printed Due to Laser Shutter Lever Malfunction
95
Variation of Image Hues Occurs When Continuous Output Is Being Made
99
Output Image Becomes Dark When the Resolution Is Set at 1200Dpi
101
When Printing from PS Driver, Output in Different Color if the Version of the System Software Is Earlier than Ver.23.02
102
Gradation Is Not Reproduced When Printing from the PS3 Printer Driver on a Machine with System Software Earlier than Ver.23.02
102
PS Printer Driver on Windows Prints Color Data that Illustrator Creates in RGB Color Mode as the Monochrome Black Data
103
Page Borders Are Printed Lightly Microsoft Word2007/2010
104
E532
105
E532-0001 When the Stapler Moves Due to the Contact with the Earth Spring (Inner Finisher-C1)
105
E001
108
None Articles
108
Black Line Due to Dirt of Stream Reading Glass
108
User Warning Message
109
Close the Lower Right Cover of the Device" Displayed Due to Deformation of the Right Door Assembly
109
Waste Toner Is Full" Message/ "Insert the Waste Toner Container" Message
110
Insert the Waste Toner Container" Is Displayed Due to Insufficient Movable Range of the Sensor Lever of the Waste Toner Inner Case Assembly
110
Insert the Waste Toner Container" Does Not Disappear
114
Waste Toner Overflow/Method to Change Setting of Waste Toner Full Detection Timing
114
Blank Display
116
When the Main Power Is Turned ON, the Control Panel Locks up after the Progress Bar Goes One Third
116
Machine Not Recovering from Sleep Mode Upon Installation Due to Foreign Substances Adhering to DIMM's Contact
118
Mottling on the LCD Control Panel Upon Main Power SW on after Installation
119
Streaks on the LCD Control Panel Upon Turning the Main Power SW on after Installation Due to the Control Panel Cable Being Inserted Askew
119
No Display Appears on Control Panel LCD Due to Poorly Connected Interface Cable at Power-On
120
Only the Main Power Supply Lamp on the Operation Panel Lighting up and no Display on the LCD Due to the Failure in the Low Voltage Power Supply Assembly
121
Machines Having System Software Earlier than Ver.30.06, When Turning the Power ON, the Machine Does Not Start but Only the Tally Lamp Is Lit
121
Duplex Jamming
122
Jam Code Upon Paper Being Attracted to the ITB Due to the Influence of the Secondary Transfer Voltage in Duplex Mode
122
Jam Occurs in the 2Nd Side of Thin Paper Due to the Paper Separation Error
123
Other Faqs
123
Skew of 2Nd Side of 2-Sided Page/ Abnormal Noise Caused by Deformation of the Right Door Assembly
123
Failure in Printing Operability When A4R/LTRR Size Paper Is Output from the Multi-Purpose Tray
126
E002-0006 Due to the Looseness of the Connector for the Harness
127
E002-0006 Due to Power Shortage Upon Temperature Increase of the Fixing Assembly Resulted from False Detection by the Main Thermistor (TH1)
128
Appendix
129
Advertisement
Advertisement
Related Products
Canon imageRUNNER ADVANCE C2200 Series
Canon imageRUNNER ADVANCE C2230G
Canon C2100 - imageCLASS PD Color Laser Printer
Canon imageRUNNER ADVANCE C256iF
Canon C2050
Canon imageRUNNER ADVANCE C2000 Series
Canon imagePRESS Lite C270
Canon imageRUNNER ADVANCE C256 Series
Canon imagePRESS Lite C265
Canon imageRUNNER ADVANCE C246iF III
Canon Categories
Printer
Digital Camera
All in One Printer
Camcorder
Scanner
More Canon Manuals
Login
Sign In
OR
Sign in with Facebook
Sign in with Google
Upload manual
Upload from disk
Upload from URL